|
||
|
Major Member
 加入日期: Mar 2010
文章: 126
|
是否後期之GTX260+ 皆無法修改BIOS電壓?
最近在著手調整手上的Asus 260 matrix
由於搭配之itracker軟體實在不夠穩定，而此系列又無法使用MSI後燃器調整 把腦筋動到修改BIOS上 然而卻發現，Nibitor無法修改260(216sp)之電壓 Voltage IC 按鈕是灰色狀態 去下載三大廠的後期BIOS，全都無法更動電壓 ASUS 260 Matrix http://www.techpowerup.com/vgabios/...896.090119.html ASUS http://www.techpowerup.com/vgabios/...896.090911.html MSI http://www.techpowerup.com/vgabios/...896.090804.html Gigabyte 260GTX Super over clock http://www.techpowerup.com/vgabios/...896.090119.html ASUS http://www.techpowerup.com/vgabios/...896.090911.html MSI http://www.techpowerup.com/vgabios/...896.090804.html Gigabyte 260GTX Super over clock http://www.techpowerup.com/vgabios/...896.090806.html 只有2008年的才可以按下Voltage IC按鈕修改 http://www.techpowerup.com/vgabios/...6.080610_1.html 請問是否後期260+已經無法調整BIOS電壓 還是另有工具可行呢? 希望有經驗的前輩能解惑，謝謝。 |
|||||||
2011-07-20, 09:10 PM
#1
|
|
|
Golden Member
加入日期: Aug 2005
文章: 3,123
|
請進Voltage Table Editor修改
 |
||
|
2011-07-20, 09:20 PM
#2
|
|
|
Major Member
加入日期: Mar 2010
文章: 126
|
引用:
可是我看網路教學...那邊只是修改標籤 並沒有實際更動電壓..... 說明也是這樣寫的...... "Here you can edit the entries of the voltage table, or even add new entries if you see there is enough space for them. A entry consist of a label eg. '1.3V' as identifier for the driver and the actual VID eg. '03' which is set to the voltage regulator. You must note that the voltage label is not responsible for the output voltage, it is only used by the driver to select correct VID. So changing e.g. '1.3V' to '1.9V' will NOT give you voltage of 1.9V, the voltage set by the entry's VID will still be 1.3V." 此文章於 2011-07-20 09:42 PM 被 Zeffi 編輯. |
|
|
2011-07-20, 09:36 PM
#3
|
|
