是否後期之GTX260+ 皆無法修改BIOS電壓?
 

最近在著手調整手上的Asus 260 matrix
由於搭配之itracker軟體實在不夠穩定，而此系列又無法使用MSI後燃器調整
把腦筋動到修改BIOS上

然而卻發現，Nibitor無法修改260(216sp)之電壓
Voltage IC 按鈕是灰色狀態

去下載三大廠的後期BIOS，全都無法更動電壓
ASUS 260 Matrix
http://www.techpowerup.com/vgabios/...896.090119.html

ASUS
http://www.techpowerup.com/vgabios/...896.090911.html

MSI
http://www.techpowerup.com/vgabios/...896.090804.html

Gigabyte 260GTX Super over clock
http://www.techpowerup.com/vgabios/...896.090119.html

ASUS
http://www.techpowerup.com/vgabios/...896.090911.html

MSI
http://www.techpowerup.com/vgabios/...896.090804.html

Gigabyte 260GTX Super over clock
http://www.techpowerup.com/vgabios/...896.090806.html


只有2008年的才可以按下Voltage IC按鈕修改
http://www.techpowerup.com/vgabios/...6.080610_1.html


請問是否後期260+已經無法調整BIOS電壓
還是另有工具可行呢?
希望有經驗的前輩能解惑，謝謝。

請進Voltage Table Editor修改 :flash:

可是我看網路教學...那邊只是修改標籤
並沒有實際更動電壓.....

說明也是這樣寫的......

"Here you can edit the entries of the voltage table, or even add
new entries if you see there is enough space for them.

A entry consist of a label eg. '1.3V' as identifier for the driver
and
the actual VID eg. '03' which is set to the voltage regulator.
You must note that the voltage label is not responsible for the
output voltage, it is only used by the driver to select correct
VID.
So changing e.g. '1.3V' to '1.9V' will NOT give you
voltage of 1.9V, the voltage set by the entry's VID
will still be 1.3V."