http://www.lsi.com/lookup/License.a...mware&locale=EN
************************************

LSI Corp. MegaRAID Firmware Release

************************************

Release date: 04/15/11

======================
Supported Controllers:
======================

MegaRAID SAS 9260-4i
MegaRAID SAS 9260-8i
MegaRAID SAS 9260DE-8i
MegaRAID SAS 9261-8i
MegaRAID SAS 9280-4i4e
MegaRAID SAS 9280-8e
MegaRAID SAS 9280DE-8e


Component:
=========
SAS MegaRAID Firmware Release for MegaRAID Controllers
Release date: 04/15/11


Version Numbers:
===============
Current Firmware Package: 12.12.0-0048
Current Package Details:
APP-2.120.63-1242_BB-2.02.00.00-0000_BIOS-3.22.00_4.11.05.00_0x05020000_HII-_WEBBIOS-6.0-34-e_29-Rel_PCLI-04.04-01700008_BOOT-09.250.01.219_NVDATA-2.09.03-0013_2011_04_06

Previous Firmware Package: 12.12.0-0045
Previous Package Details:
APP-2.120.33-1197_BB-2.02.00.00-0000_BIOS-3.21.00_4.11.05.00_0x05000000_HII-_WEBBIOS-6.0-34-e_29-Rel_PCLI-04.04-01700008_BOOT-01.250.04.219_NVDATA-2.09.03-0010_2011_02_25


Bug Fixes and Enhancements:
===========================
Firmware:
=========
LSIP200167677 (CO) FW should issue STANDBY IMMEDIATE command to SATA disks during shutdown from OS
LSIP200164222 (CO) Add mfc paramater that enables prints of topology changes in fw serial port output
LSIP200158868 (DFCT) Power save mode hangs firmware causing driver to send kill adpter command
LSIP200170440 (DFCT) Firmware Incompleted Writes During Power Fail and Recovery
LSIP200153454 (DFCT) Firmware Incompleted Writes During Power Fail and Recovery
LSIP200125226 (DFCT) Red LED is lit on the next empty slot in an specific JBOD if the empy slot is immediatly after an array member
LSIP200153500 (DFCT) 9280-4i4e unable to import a Foreign Configuration
LSIP200166039 (DFCT) Label of Virtual Disk not provided by Drive Identify Command
LSIP200164210 (DFCT) Enable/disable of HDD cache doesn't appear to work
LSIP200167654 (DFCT) Potential data mismatch found when rebuild is progressing on R1 VD with media error under IO.
LSIP200166899 (DFCT) HWR: Fw log should indicate if a created/existing VD is already initialized
LSIP200157150 (DFCT) The new event can't be logged.
LSIP200156699 (DFCT) MegaCli -AdpAllInfo shows BBU is not supported for Castor cards
LSIP200146481 (DFCT) SMART predictive failure detection takes longer in 10M09 than 10M06
LSIP200146484 (DFCT) MR FW reports "Unexpected sense, Invalid field in CDB" for LOG SENSE command sent to Seagate drives
LSIP200169751 (DFCT) MegaRaid FW does not wait at post

BIOS:
========
HII changes only


Installation:
=============
Use MegaCLI to flash the SAS controllers. MegaCLI can be downloaded from the support and download
section of www.lsi.com.

Command syntax: MegaCli -adpfwflash -f mr2108fw.rom -a0