physical memory ---> RAM 壞ㄌ !!!

１.若以硬體而言，確有可能RAM 壞ㄌ !!! （壞得徹底，你根本不能開機）；也很有可能因為買了雜牌RAM，而存取錯誤（每天都會當機的兩三次元兇）
２.若以軟體而言，可能因為程序運算失敗或硬碟在讀資料時出錯（如硬碟上某一小部分壞ㄌ !!! ），皆會導至運算執行失敗，出現記憶體存取錯誤晝面（就是這個藍底白字當機晝面）但因使為的OS是裝WIN2K PRO，這類軟體所造成的可能性，不高！

綜合上述，小弟初步認為， 因為買了雜牌RAM，而存取錯誤的可能性最高！

Beginning dump of physical memory =>指的是開始把實體記憶體的內容Dump出來,這是在當機時正常會發生的狀況...
我幫您查了一下MSDN錯誤訊息,得到以下結果,請您參考~


Error Message:
STOP: 0x0000004E (parameter, parameter, parameter, parameter) PFN_LIST_CORRUPT

Explanation:
This is a Windows 2000 Executive character-mode STOP message. It indicates the memory management page file number (PFN) list is corrupted.

User Action:
If this is the first time you have booted after installing new hardware, remove the hardware and boot again. Check the Microsoft Hardware Compatibility List to verify that the hardware and its drivers are compatible with Windows 2000. For information about the hardware, contact the supplier. If you are installing Windows 2000 for the first time, check the Windows 2000 system requirements, including the amount of RAM and disk space required to load the operating system. Also, check the Hardware Compatibility List to verify that the system can run Windows 2000. If Windows 2000 is loaded and no new hardware has been installed, reboot with recovery options set to create a dump file. If the message continues to appear, select the Last Known Good option when you reboot. If there is no Last Known Good configuration, try using the Emergency Repair Disk. If you do not have an Emergency Repair Disk, contact your technical support group.