try use dvd shrink then or clonedvd.

那兩個軟體壓縮出來的畫質太差了，這是我看了DVD-RB所壓出來之後的心得，但是目前卻遇到多角度的問題！clonedvd和dvd shrink我試過，都沒有這個問題！

Post上來的這幾個畫面,應該是CSS(內容搗亂系統)沒有破解掉所產生的問題,樓主,還有一個方法可以更加確定是CSS沒有破解好的問題,那就是您播放時不只畫面如此,聲音更是斷斷續續.有些DVD製作軟體,是沒有辦法配合AnyDVD使用,因此裝了AnyDVD,仍無法正常破解.譬如DVD2O就無法搭配AnyDVD,製作有Arcoss Protection的某些DVD,至今AnyDVD相容度最好的仍算是DVD Shrink 跟 Clone DVD. 以上僅供參考,歡迎其他大大提供更詳盡之正解.

這情況下，我想應先用DVD Shrink 過水一次(即100% Uncompressed)才交給RB做，應該可以解決問題。

我這張DVD用DVD Shrink讀取的時候它寫not encrypted，所以應該不是CSS的問題吧？
而且其他部分的畫面都很正常，只有在角度轉換(我這張DVD有可手動切換的多角度)時，
畫面才會出現如圖那樣的破碎，難道多角度的DVD影片架構和一般DVD不一樣嗎？

都沒有人知道怎麼解決嗎？用DVD Shrink雖然沒此一問題，但畫質比不上DVD Rebuilder啊！

不知您用的是最新的版本 1.10.2 嗎?
搭配那一套編碼? CCE ? HC ? AutoQMat ?
能不能把您 Prepare 後的訊息貼出來供參考.

我用的是1.101pro + CCE 2.70。
訊息在附件中。

已經有出DVD ReBuilder Pro 1.10.3用新版試試！新版說明如下：
Changes in Version 1.10.3; August 11th, 2006 :
- Added routines to recognize and ignore extraneous files in the source directory -- including unreferenced VTSs that serve no purpose except to occupy space.
- Fixed "Runtime Error 6" that can occur during rebuild when dealing with very small M2V files under specific conditions.
- Corrected a problem in which, under specific circumstances, ILVU segments for angles that are encoded with CCE may not be encoding with necessary GOP restrictions.
- Fixed an error in which pointers in the SML_AGLI table could incorrectly set some block pointers to NEXT_ILVU + 1 rather then NEXT_ILVU. This could cause a momemtary audio or video "jump" when switching angles.
- Tweaked several ILVU settings to ensure strict compliance.
- Added code to verify paths in INI. This will prevent the occurance of Runtime Error '52' and Runtime Error '76' when invalid paths are manually entered into the INI file.
- Fixed a bug in which the completion status bar may not be updated to reflect 100% at the end of PREPARE.
- Updated the installer to include AVISYNTH v2.5.6. It will NOT, however, overwrite your existing AVISYNTH installation so it it recommended that if you want to upgrade to this newer version -- you must first uninstall AVISYNTH using the Windows Control Panel.
- Added Rebuilder version information to AVS, INF, and LOG files to make debugging easier.
- Corrected a bug in which detection of the AutoQMatEnc path may not have worked properly on some non-English systems.
- Corrected an error in which "Runtime Error '52'" may occur at startup on systems that use drives other than "C:" as the root.
- Fixed a command line incompatibility issue with early versions of QuEnc.
- Added an optional alternate output path for ISO creation. By adding "ISO_OUTPUT=" (and a path) to the "[Paths]" area of the REBUILDER.INI you can redirect output to a path or drive other than the output directory.
- Updated the installer to include the latest QuEnc v0.71.
- Fixed other minor/cosmetic bugs.