|
||
|
Basic Member
加入日期: Jan 2006
文章: 25
|
Corsair TWINX2048RE-3200 and Cooler master real power 550
I get 4G TWINX2048RE-3200 installed on the mother board TYAN thunder K8WE S2895 with two AMD 246 opteron and Cooler master real power 550. My question is when I install Win XP on my computer, the WIN XP can not be completely installed on my system. when I reset the power, the system goes opening WinXP window, then goes black.
Does the memory match the mother board? Does the power support the board? sorry..english system computer without chinese, so.... |
|||||||
2006-01-10, 07:13 AM
#1
|
|
|
Major Member
 加入日期: Apr 2005
文章: 167
|
引用:
您好！針對Tyan主機板型號K8WE S2895的適用記憶體型號如下： CM72SD1024RLP-3200 (1GB,DDR400) CM72SD512RLP-3200 (512MB,DDR400) CM72SD1024RLP-2700 (1GB,DDR333) CM72SD512RLP-2700 (512MB,DDR333) CM75SD2048RLP-2700 (2GB,DDR333) CM78SD1024R-2700 (1GB,DDR333,Without low profile) 不建議您使用TWINX2048RE-3200，因為您的主機板是伺服器主機板 請使用以上型號記憶體！ 原廠匹配連結如下： http://www.corsairmemory.com/corsai...ch_results.html |
|||
|
2006-01-10, 08:51 AM
#2
|
|
|
Basic Member
加入日期: Jan 2006
文章: 25
|
But TWINX2048RE-3200 also has ECC and registered.
|
|
2006-01-10, 10:53 AM
#3
|
|
|
Basic Member
加入日期: Jan 2006
文章: 25
|
Does Cooler master real power 550 support dual CPU?
|
|
2006-01-10, 10:56 AM
#4
|
|
|
Basic Member
加入日期: Jan 2006
文章: 25
|
You've probably bought the wrong model of modules for that Tyan motherboard. The TWINX kit is part of the XMS series, which requires a higher than JEDEC-standard voltage in order to work reliably at the advertised timings. Unfortunately, Tyan offers no provision at all whatsoever to adjust the memory (DIMM) voltage on their motherboards.
In other words, you've bought the correct type of memory (registered ECC), but the wrong line. And the Socket 940 Opterons will not work at all with unbuffered memory (ECC or non-ECC) because it requires registered memory. The only 1GB DDR400 Corsair module which will work with your motherboard is the CM72SD1024RLP-3200 module. |
|
2006-01-10, 12:03 PM
#5
|
|
