我的Liteon24102B原本很正常，昨天開始不知道為什麼用Nero5551燒片都不能成功
，情況是在燒完片後燒錄機不會把片子退出來就是停在lead out的地方，最後nero顯
示燒錄失敗但是片子在cd-rom上還是可以讀，和燒錄機的讀取燈會一直閃不能退片必
須要強制退片和重開機燒錄機才會恢復正常。底下我列出nero的Log希望知道的人可以幫幫我吧！

Windows XP 5.1
WinAspi: -
ahead WinASPI: File 'C:\Program Files\ahead\Nero\Wnaspi32.dll': Ver=2.0.1.28, size=172099 bytes, created 2001/5/21 下午 08:35:20
Nero Version: 5.5.5.1
Recorder: <LITE-ON LTR-24102B> Version: 5S0F - HA 1 TA 0 - 5.5.5.1
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
CD-ROM: <MATSHITA DVD-ROM SR-8586>Version: 3Z16 - HA 1 TA 1 - 5.5.5.1
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 32049H2 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON LTR-24102B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : MATSHITA DVD-ROM SR-8586 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : NERO IMAGEDRIVE 1.0f Imagedrv Port 2 ID 0 DMA: ?
=======================

AutoRun : 0
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 34603008 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 255MB (261616kB)
Free physical memory: 35MB (36276kB)
Memory in use : 86 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry: 1
Wizard: Off

CD映像
3.11.2001

上午 08:20:18 #1 Phase 72 File dlgbrnst.cpp, Line 1426
BURN-Proof activated

上午 08:20:18 #2 Text 0 File Reader.cpp, Line 117
Reader running

上午 08:20:18 #3 Text 0 File Writer.cpp, Line 122
Writer LTR-24102B running

上午 08:20:18 #4 Text 0 File ThreadedTransferInterface.cpp, Line 668
Setup items (original item values)
0: TRM_DATA_MODE1 (ISO9660)
2 indices, index0 (150) not provided
original CD pos #0 + 91704 (91704) = #91704/20:22.54
relocatable, CD pos for caching/writing not required/not required, patch infos
--------------------------------------------------------------

上午 08:20:22 #5 Text 0 File DlgWaitCD.cpp, Line 1199
Recorder: LITE-ON LTR-24102B;
CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: D0 00 90, 2: 61 1A 42 (LI 97:26.66), 3: 4B 00 00 (LO 75:00.00)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

上午 08:20:22 #6 Text 0 File ThreadedTransferInterface.cpp, Line 803
Prepare recorder LTR-24102B for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Close CD
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 188116992

上午 08:20:22 #7 Text 0 File ThreadedTransferInterface.cpp, Line 668
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (ISO9660)
2 indices, index0 (150) not provided
original CD pos #0 + 91704 (91704) = #91704/20:22.54
relocatable, CD pos for caching/writing not required/not required, patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 91704 blocks [LTR-24102B ]
--------------------------------------------------------------

上午 08:20:22 #8 Phase 36 File dlgbrnst.cpp, Line 1426
Burn process started at 24x (3600 KB/s)

上午 08:20:22 #9 Text 0 File ThreadedTransferInterface.cpp, Line 1844
Verifying CD position of item 0 (relocatable, no CD pos, patch infos, orig at #0): write at #0

上午 08:20:22 #10 Text 0 File Mmc.cpp, Line 14392
Set BUFE: BURN-Proof -> ON

上午 08:21:53 #11 Text 0 File ThreadedTransfer.cpp, Line 219
all writers idle, stopping conversion

上午 08:26:03 #12 CDR -1175 File Cdrdrv.cpp, Line 1180
Internal trace
Resending of command failed after 30000ms
CDB Data[hex]: 00 00 00 00 00 00 00 00 00 00 00 00


上午 08:26:03 #13 SCSI -1169 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x08

上午 08:30:21 #14 mmc -1169 File ThreadedTransferInterface.cpp, Line 1363
Logical unit not ready, operation in progress

上午 08:30:21 #15 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1363
Could not perform end of Disc At Once

上午 08:35:21 #16 CDR -1175 File Cdrdrv.cpp, Line 1180
Internal trace
Resending of command failed after 300000ms
CDB Data[hex]: 35 02 00 00 00 00 00 00 00 00 00 00


上午 08:35:21 #17 SCSI -1169 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x08

上午 08:39:39 #18 CDR -201 File WriterStatus.cpp, Line 152
Invalid writestate

上午 08:39:39 #19 TRANSFER -24 File WriterStatus.cpp, Line 152
Could not perform end of Disc At Once

上午 08:39:40 #20 Phase 38 File dlgbrnst.cpp, Line 1426
Burn process failed at 24x (3600 KB/s)

上午 08:39:41 #21 Text 0 File Scsicmd.cpp, Line 371
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated

上午 08:40:41 #22 CDR -1175 File Cdrdrv.cpp, Line 1180
Internal trace
Resending of command failed after 30000ms
CDB Data[hex]: 00 00 00 00 00 00 00 00 00 00 00 00


上午 08:40:41 #23 SCSI -1169 File Cdrdrv.cpp, Line 1181
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x08