今天剛買的Zynet外接盒無法燒錄
燒錄機A07

有哪位好心的大大知道..可以幫助我嗎?...感謝!


Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 2002/7/17 上午 09:20:56
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 2004/7/28 下午 04:51:12
Nero版本: 6.6.0.1
燒錄器： <PIONEER DVD-RW DVR-107D>版本: 1.21 - HA 3 TA 0 - 6.6.0.1
界面卡驅動程式： <> HA 3
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <AXV CD/DVD-ROM >版本: 2.2a - HA 2 TA 0 - 6.6.0.1
界面卡驅動程式： <a347scsi> HA 2

=== Scsi-Device-Map ===
CdRomPeripheral : SONY DVD RW DRU-710A atapi Port 0 ID 1 DMA: On
DiskPeripheral : Maxtor 6Y120P0 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
SONY DVD RW DRU-710A J: CDRom0
AXV CD/DVD-ROM I: CDRom1
PIONEER DVD-RW DVR-107D H: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (83886080) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523756kB)
Free physical memory: 190MB (195400kB)
Memory in use : 62 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

6.4.2005
UDF/ISO編製
下午 10:49:04 #1 Phase 112 File dlgbrnst.cpp, Line 1853
重新配置DVD影片的位置

下午 10:49:04 #2 Phase 114 File dlgbrnst.cpp, Line 1853
影片檔在DVD上配置完成(沒有更動檔案)

下午 10:49:04 #3 Text 0 File Isodoc.cpp, Line 6165
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

下午 10:49:04 #4 Phase 111 File dlgbrnst.cpp, Line 1853
DVD影片檔已排序完成

下午 10:49:04 #5 Text 0 File Reader.cpp, Line 127
Reader running

下午 10:49:04 #6 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD-RW DVR-107D running

下午 10:49:04 #7 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

下午 10:49:04 #8 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

下午 10:49:04 #9 Text 0 File Burncd.cpp, Line 3117
Turn on 光碟一次燒錄(DAO), using DVD media

下午 10:49:50 #10 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2123391 (471:51.66, 4147MB)

下午 10:49:50 #11 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD DVD)

下午 10:49:50 #12 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: PIONEER DVD-RW DVR-107D, Media type: DVD+R
Disc Manufacturer ID: YUDEN000, Media Type ID: T02, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3

下午 10:49:50 #13 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Disc not writeable. Insert writeable disc.
(Medium in drive: DVD+R. Medium required by compilation: DVD+R/RW, DVD-R/RW.)

下午 10:49:50 #14 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2123392 (2123392) = #2123392/471:51.67
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2123392 blocks [PIONEER DVD-RW DVR-107D]
--------------------------------------------------------------

下午 10:49:50 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1047
Prepare recorder [PIONEER DVD-RW DVR-107D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4348706816, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2123392 | lead-out | 1 | 0x00 | 0x41

下午 10:49:51 #16 Phase 24 File dlgbrnst.cpp, Line 1853
檔案暫存作業開始

下午 10:49:51 #17 Text 0 File Burncd.cpp, Line 4003
Cache writing successful.

下午 10:49:51 #18 Phase 25 File dlgbrnst.cpp, Line 1853
檔案暫存作業完成

下午 10:49:51 #19 Phase 36 File dlgbrnst.cpp, Line 1853
以6x (8,310 KB/s)的速度開始燒錄

下午 10:49:51 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2497
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

下午 10:49:51 #21 Text 0 File Cdrdrv.cpp, Line 8281
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: YUDEN000
Media type ID: T02
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 59 55 44 45 4E - 30 30 30 54 30 32 00 38 ...YUDEN000T02.8
23 54 37 10 02 4E 72 02 - 8C 63 16 16 0B 0B 0A 0A #T7..Nr..c......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

下午 10:49:51 #22 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 8:54,282 (534282ms) -> OK

下午 10:49:51 #23 Text 0 File DVDPlusRW.cpp, Line 632
Start write address at LBA 0
DVD high compatibility mode: Yes

下午 10:49:55 #24 Text 0 File Cdrdrv.cpp, Line 1284
22:49:55.093 - PIONEER DVD-RW DVR-107D\H3 T0 : Queue again later

下午 10:50:06 #25 SCSI -500 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x04120000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

下午 10:50:06 #26 CDR -500 File Writer.cpp, Line 311
SCSI 指令終止
PIONEER DVD-RW DVR-107D\H3 T0

下午 10:50:06 #27 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

下午 10:50:06 #28 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

下午 10:50:29 #29 Phase 127 File dlgbrnst.cpp, Line 1853
產生DVD高相容性外框

下午 10:51:43 #30 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK

下午 10:51:43 #31 Phase 129 File dlgbrnst.cpp, Line 1853
產生DVD外框完成

下午 10:51:43 #32 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK

下午 10:51:43 #33 Phase 38 File dlgbrnst.cpp, Line 1853
以6x (8,310 KB/s)的速度燒錄失敗


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 2002/7/17 上午 08:53:02
File 'Drivers\a347scsi.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 2004/4/30 上午 09:33:00 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)