為什麼不直接燒錄映像檔?

是用107v2b5dl 這個版本的fw?這版並沒支援Ritek DL,只支援三菱的DL

要燒Ritek DL 要用別的版本fw,鏈結參照下面

http://www.micheldeboer.nl/firmware/index.html

wadds大大請問下載2510A221.zip這個檔案就可以嗎? 網站裡的2500/2510韌體都可以拿來給2500用嗎? 謝謝.

superbbc大大,酒精把DL片子判讀成650MB的容量.

不是,是2510216_RPC1_Herrie.rar 這一個才支援Ritek DL

對,都可以沒有問題,可以用網頁中的
http://www.micheldeboer.nl/firmware/NECWinFlash.exe
在Windows下更新

請問一下大大，有沒有可以8倍燒DIGITANK的韌體....
Herrie版的兩個好像都只能讀到2.4倍...
我的是2500A...
灌1.9版的行嗎??但是它旁邊註明是給OEM的害我不敢更新...

請問Mad Dog 2F8也可以用在2500A上嗎?

可以,在下的2500a已經更新為2F8了

到2F8也是只有2.4X

印象中在下是從1.07跳至2.xx的版本,中間沒經過1.9的版本

燒DL(D9)片經驗分享
原本小弟NEC2500是刷Herrie 1.07v2 Dual Layer Bitsetting Beta 5軔體..發現要燒PHILIPS CD2 DL沒辦法燒...後來跟朋友討論是軔體關係心一狠乾脆刷NEC2510 軔體結果順利DL片子...燒錄方法也簡單直接把原版光碟片(來源片)放DVD ROM、DL燒片當然是放燒錄機上...先啟動ANYDVD 再啟動NERO 用飛機式直接對拷
以下附說明跟軔体提供參考

NEC2500 to 2510



Media Information
Region information N/A not a DVD-VIDEO
Media code/Manufacturer ID PHILIPS CD2
Media Product Revision Number 00h
Format Capacity Blank Disc
Free Blocks 4253024256
Free Capacity 7.96GB(8.55GB)
Book Type DVD+R DL
Media Type DVD+R DL
Manufacturer Rated Speed Unknown
Available Write Descriptor CLV 2.4x 3324KBps
Linear Density Blank Disc
Track Density Unknown
Number of Layers 1
------------------------------------------------------------------------------------------------------
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 1999/9/10 下午 12:06:00
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 2004/7/28 下午 04:51:12
Nero版本: 6.6.0.1
燒錄器： <_NEC DVD_RW ND-2510A> 版本: 2.F8 - HA 4 TA 3 - 6.6.0.1
界面卡驅動程式： <> HA 4
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <PIONEER DVD-ROM DVD-121 >版本: 1.07 - HA 2 TA 0 - 6.6.0.1
界面卡驅動程式： <atapi> HA 2

=== Scsi-Device-Map ===
DiskPeripheral : ST340016A 3.10 Pnp680r Port 0 ID 0 DMA: Off
DiskPeripheral : ST340824A 3.28 Pnp680r Port 0 ID 1 DMA: Off
DiskPeripheral : ST380021A atapi Port 1 ID 0 DMA: On
DiskPeripheral : Maxtor 6Y120P0 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD-ROM DVD-121 atapi Port 2 ID 0 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
PIONEER DVD-ROM DVD-121 G: CDRom0
AXV CD/DVD-ROM R: CDRom1
_NEC DVD_RW ND-2510A H: CDRom4
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 159MB (163668kB)
Memory in use : 68 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

23.11.2004
DVD飛機式複製
下午 09:07:33 #1 Text 0 File Reader.cpp, Line 127
Reader running

下午 09:07:33 #2 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD_RW ND-2510A running

下午 09:07:33 #3 Text 0 File DVDCopy.cpp, Line 267
DVD Track-Information from source disc
S01 T01 Con 0x14 Start 0 Len 4087383 (gap 0) Blank 0 Res 0 Dmg 0 Mode TRM_DATA_MODE1 (0)

下午 09:07:33 #4 Text 0 File DVDCopy.cpp, Line 370
Max -1 tracks of 1 allowed to copy
1: 0 - 4087383 = 4087383, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

下午 09:07:33 #5 Text 0 File Burncd.cpp, Line 3117
Turn on 光碟一次燒錄(DAO), using DVD media

下午 09:08:13 #6 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 4087382 (908:18.32, 7983MB)

下午 09:08:13 #7 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)

下午 09:08:13 #8 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: _NEC DVD_RW ND-2510A, Media type: DVD+R9 Double Layer

下午 09:08:13 #9 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: 不明. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.)

下午 09:08:13 #10 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - 資料(模式1))
2 indices, index0 (150) not provided
original disc pos #0 + 4087383 (4087383) = #4087383/908:18.33
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 4087383 blocks [_NEC DVD_RW ND-2510A]
--------------------------------------------------------------

下午 09:08:13 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1047
Prepare recorder [_NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 8370960384, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
4087383 | lead-out | 1 | 0x00 | 0x41

下午 09:08:13 #12 Phase 36 File dlgbrnst.cpp, Line 1853
以2.4x (3,324 KB/s)的速度開始燒錄

下午 09:08:13 #13 Text 0 File ThreadedTransferInterface.cpp, Line 2497
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

下午 09:08:13 #14 Text 0 File DVDPlusDualLayer.cpp, Line 397
Disc finalized, LBA total Image size: 4087383 (7983MB), Last LBA L0: 2043695 (3991MB)

下午 09:08:45 #15 Text 0 File DVDPlusDualLayer.cpp, Line 481
L0 Data Zone Capacity set to 2043696 (1F2F30h, 3991MB) -> OK, confirmed setting

下午 09:08:45 #16 CDR -1205 File DVDPlusDualLayer.cpp, Line 506
光碟第一層燒錄中

下午 09:08:45 #17 Text 0 File DVDPlusDualLayer.cpp, Line 514
Start writing layer 1 at address 0 (0h)

下午 09:08:45 #18 SCSI -1066 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 4, TA 3, LUN 0, buffer 0x03FC6000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00

下午 09:08:45 #19 Text 0 File DVDR.cpp, Line 5656
Book Type counter: 498, Book Type selected in EEPROM, command version 4

下午 09:08:45 #20 SCSI -1066 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 4, TA 3, LUN 0, buffer 0x03FC8000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xC9 0x02 0x02 0x01 0x42 0x54 0x59 0x50 0x45 0x01 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00

下午 09:08:45 #21 Text 0 File DVDR.cpp, Line 5656
Book Type counter: 498, Book Type selected in EEPROM, command version 4

下午 09:08:45 #22 Text 0 File DVDR.cpp, Line 5656
Book Type counter: 498, Book Type selected in EEPROM, command version 4

下午 09:08:45 #23 Text 0 File DVDR.cpp, Line 4877
Drive: _NEC DVD_RW ND-2510A
Book Type request: DVD-ROM, write to RAM
select Book Type setting from RAM

下午 09:08:45 #24 CDR -1207 File DVDR.cpp, Line 4608
Book Type automatically set to: DVD-ROM

下午 09:08:45 #25 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 41:49,909 (2509909ms) -> OK

下午 09:08:45 #26 Text 0 File DVDPlusRW.cpp, Line 632
Start write address at LBA 0
DVD high compatibility mode: Yes

下午 09:29:18 #27 CDR -1206 File DVDPlusDualLayer.cpp, Line 1680
光碟第二層燒錄中

下午 09:29:18 #28 Text 0 File DVDPlusDualLayer.cpp, Line 1687
Perform layer 1 to 2 jump before writing at address 2043712 (1F2F40h)

下午 09:49:38 #29 Text 0 File WriterStatus.cpp, Line 116
<_NEC DVD_RW ND-2510A > start writing Lead-Out at LBA 4087383 (3E5E57h), lenght 0 blocks

下午 09:49:38 #30 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

下午 09:50:31 #31 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK

下午 09:50:31 #32 Text 0 File DVDR.cpp, Line 5656
Book Type counter: 498, Book Type selected in RAM, command version 4

下午 09:50:31 #33 Text 0 File DVDR.cpp, Line 5656
Book Type counter: 498, Book Type selected in RAM, command version 4

下午 09:50:32 #34 Text 0 File DVDR.cpp, Line 4877
Drive: _NEC DVD_RW ND-2510A
Book Type request: DVD-ROM, write to RAM
select Book Type setting from RAM

下午 09:50:32 #35 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK

下午 09:50:32 #36 Phase 37 File dlgbrnst.cpp, Line 1853
以2.4x (3,324 KB/s)的速度燒錄完畢