大大簡單總結一下嘛。 因爲看得不是很明白~~

This BIOS feature controls the AGP bus Fast Write capability. Fast Write is a feature which accelerates memory write transactions from the chipset to the AGP device.

Fast Write allows the AGP device act like a PCI device. This allows it to bypass the main memory and directly access the data which improves AGP read performance. However AGP write performance is not affected.

It is recommended that you enable AGP Fast Write for better AGP read performance but disable it if any of your PCI cards start acting funny.

這是原文中對fast write的解釋，大意是說這功能是用來加速記憶體從晶片到agp裝置的寫入速率，可對agp的讀取有效能上的增進，一般建議是建議把這選項開啟，但若有pic的裝置出現問題的話，則關閉它！

接下來他做了一連串的測試
數據分別是fast write off/on

由數據他又做了一項分析

It appears that fast writes made such a slight difference, almost no difference at all. Also, if you have noticed as well that the scores varied more with fast writes on but still averaged out almost the same. This very well could be a result of effect on the systems stability. If you noticed on GL XS there was an unexplainable large drop in the third test so I tested again and included the extra score in the averaging to keep the results fair and accurate.

As I’ve recommend before it appears the best setting is fast writes off except for some rare cases or special circumstances (one being the 9600 series for now).

fast write的功能開或關只有一點點的差異，幾乎沒有不同，由測試的結果平均值來看可說是同樣的！因此他建議最好的設定是把這功能關閉，除了一些特別的因素，因為這是一項會影響系統穩定性的功能！

ps.我翻譯的很簡單，只說主要的內容！若要更詳細的翻譯，可以自行查字典

^^

沒記錯的話AGP8X完整支援是需要開啟FastWrite的說...

因為某些ATI的卡配主機板
開啟Firstewrite會造成不穩
所以Omega預設就把他關掉
開啟的話顯示卡運作會產生比較高的熱量
關掉跟開啟的效能差不多

http://www.pcdvd.com.tw/showthread....5&highlight=agp