![]() |
||
Major Member
![]() 加入日期: Dec 2000 您的住址: USA
文章: 245
|
Dell Perc 6/i RAID5 測試
最近買了一張Dell Perc 6/i
用四顆Barracuda 11 500G組RAID5 write-through / read ahead 但是做了測試感覺數據怪怪的 都停在100左右 ![]() 把read ahead關掉可以到120左右 不知道大家有什麼想法嗎? ![]() CPU: E6750 MOBO: G33M-DS2R RAID Installed on PCI-E 16x 2x 250G Barracuda 10 RAID1 @ CH0 on Perc 6/i 4x 500G Barracuda 11 RAID5 @ CH1 on Perc 6/i
__________________
Workstation Gigabyte EP45-UD3P | Intel Core 2 Duo E8400 oc 4.05GHz | Transcend DDR2-800 1GB x 4 (D9GMH) | WD RaptorX 150 ![]() ![]() ![]() ![]() Retired Workstation Gigabyte 8KNXP | Intel Pentium 4 2.4C oc 3GHz | Kingston HyperX DDR400 512MB x 2 | WD Raptor 36G x 2 RAID 0 @ ICH5R | XFX GeForce 6600 GT | PIONEER 120S / A109 | Antec TrueBlue 480 Server Gigabyte G33M-DS2R | Intel Core 2 Duo E6750 | DDRII-800 2GB x 4 (Micron) | Dell Perc 6/i RAID Controller | Seagate Barracuda 10 250GBx2 @ RAID1 | Seagate Barracuda 11 500GBx4 @ RAID5 | Intel Pro/1000 PT Dual Port Server Adapter | Pioneer DVR-215BK | AcBel R8 525W Retiring Server MSI K7N2GM2-LSR | AMD Sempron 2600+ | PQI DDR400 512MB x 2 | HGST 60GXP x 2 RAID 1 @ nvraid | GeForce4 MX IGP | Intel Pro 1000 MT Desktop Adapter | Toshiba M1802 | Plextor 40/12/40A | Cooler master eXtreme 430 Notebook SONY TR3AP2 | Intel Pentium M 1.0 ULV | DDR266 512MB x 2 | HGST 1.8" 40G | 10.4" WXGA | Intel 2200BG Network INTEL NIC on Server / Workstation / Notebook | Synology DS-1010+ | DD-WRT on ASUS WL-520GU | HP ProCurve 1810G-8 Switch | 3M Cat6 Wiring | Linksys PAP2 VoIP Adapter |
|||||||
![]() |
![]() |
Major Member
![]() 加入日期: Feb 2005
文章: 188
|
沒有開Write Back 的話Raid5可能上不去吧...
|
||
![]() |
![]() |
Major Member
![]() 加入日期: Dec 2000 您的住址: USA
文章: 245
|
引用:
寫錯了 恩我是開write-back 但我沒電池 所以有強迫write-back ![]()
__________________
Workstation Gigabyte EP45-UD3P | Intel Core 2 Duo E8400 oc 4.05GHz | Transcend DDR2-800 1GB x 4 (D9GMH) | WD RaptorX 150 ![]() ![]() ![]() ![]() Retired Workstation Gigabyte 8KNXP | Intel Pentium 4 2.4C oc 3GHz | Kingston HyperX DDR400 512MB x 2 | WD Raptor 36G x 2 RAID 0 @ ICH5R | XFX GeForce 6600 GT | PIONEER 120S / A109 | Antec TrueBlue 480 Server Gigabyte G33M-DS2R | Intel Core 2 Duo E6750 | DDRII-800 2GB x 4 (Micron) | Dell Perc 6/i RAID Controller | Seagate Barracuda 10 250GBx2 @ RAID1 | Seagate Barracuda 11 500GBx4 @ RAID5 | Intel Pro/1000 PT Dual Port Server Adapter | Pioneer DVR-215BK | AcBel R8 525W Retiring Server MSI K7N2GM2-LSR | AMD Sempron 2600+ | PQI DDR400 512MB x 2 | HGST 60GXP x 2 RAID 1 @ nvraid | GeForce4 MX IGP | Intel Pro 1000 MT Desktop Adapter | Toshiba M1802 | Plextor 40/12/40A | Cooler master eXtreme 430 Notebook SONY TR3AP2 | Intel Pentium M 1.0 ULV | DDR266 512MB x 2 | HGST 1.8" 40G | 10.4" WXGA | Intel 2200BG Network INTEL NIC on Server / Workstation / Notebook | Synology DS-1010+ | DD-WRT on ASUS WL-520GU | HP ProCurve 1810G-8 Switch | 3M Cat6 Wiring | Linksys PAP2 VoIP Adapter |
|
![]() |
![]() |
Master Member
加入日期: Mar 2004 您的住址: 亞洲.台灣.台北
文章: 2,054
|
引用:
請 測 Write 你的圖是 Read read 跟write-back/write-through 沒關係 |
|
![]() |
![]() |
Major Member
![]() 加入日期: Nov 2000 您的住址: PnD
文章: 139
|
看要不要先跑RAID0試試看PCI-E頻寬,
如果RAID0可以正常的發揮出RAID0的頻寬, 那可能是卡的問題(BIOS或是驅動程式還沒有到最佳化); 如果RAID0頻寬一樣上不去的話, 例如兩顆RAID0的傳輸速率沒有到單顆8成效率的兩倍, 那麼可能是這張卡在這張版子上無法發揮全速, 就需要換一張主機板測試看看。
__________________
nashi. |
![]() |
![]() |
Basic Member
加入日期: Feb 2008
文章: 27
|
引用:
看到這個access time 實在很好奇您的stripe size設多大呢 此外 您的傳輸速度讓人感覺頻寬好像被限制住了 要不要查一下 pcie目前試跑幾倍呢?? 另補上小弟先前做的測試 raid5 test with 3*wd 500aaks disks on perc5i : WriteBack Consist checking http://www.imagepile.net/index.php?...%20checking.jpg raid5 test with 3*wd 500aaks disks on perc5i : WriteThrough Consist checking http://www.imagepile.net/index.php?...%20checking.jpg 由於剛好在做一致性檢查 所以傳輸速度大約減半 給您作個參考 此文章於 2008-04-30 07:23 PM 被 八尾半 編輯. |
|
![]() |
![]() |
Major Member
![]() 加入日期: Dec 2000 您的住址: USA
文章: 245
|
我用Everest看了一下
PCI-E是跑在8X沒錯 Stripe Size 128KB Barracuda 11 500GBx4 ![]() 第一張貼的是Always Read Ahead 下面貼兩張其他的讀取方式 Adaptive Read Ahead ![]() No Read Ahead ![]() 附上一張MegaRaid StorageManager的圖 ![]()
__________________
Workstation Gigabyte EP45-UD3P | Intel Core 2 Duo E8400 oc 4.05GHz | Transcend DDR2-800 1GB x 4 (D9GMH) | WD RaptorX 150 ![]() ![]() ![]() ![]() Retired Workstation Gigabyte 8KNXP | Intel Pentium 4 2.4C oc 3GHz | Kingston HyperX DDR400 512MB x 2 | WD Raptor 36G x 2 RAID 0 @ ICH5R | XFX GeForce 6600 GT | PIONEER 120S / A109 | Antec TrueBlue 480 Server Gigabyte G33M-DS2R | Intel Core 2 Duo E6750 | DDRII-800 2GB x 4 (Micron) | Dell Perc 6/i RAID Controller | Seagate Barracuda 10 250GBx2 @ RAID1 | Seagate Barracuda 11 500GBx4 @ RAID5 | Intel Pro/1000 PT Dual Port Server Adapter | Pioneer DVR-215BK | AcBel R8 525W Retiring Server MSI K7N2GM2-LSR | AMD Sempron 2600+ | PQI DDR400 512MB x 2 | HGST 60GXP x 2 RAID 1 @ nvraid | GeForce4 MX IGP | Intel Pro 1000 MT Desktop Adapter | Toshiba M1802 | Plextor 40/12/40A | Cooler master eXtreme 430 Notebook SONY TR3AP2 | Intel Pentium M 1.0 ULV | DDR266 512MB x 2 | HGST 1.8" 40G | 10.4" WXGA | Intel 2200BG Network INTEL NIC on Server / Workstation / Notebook | Synology DS-1010+ | DD-WRT on ASUS WL-520GU | HP ProCurve 1810G-8 Switch | 3M Cat6 Wiring | Linksys PAP2 VoIP Adapter |
![]() |
![]() |
Major Member
![]() 加入日期: Dec 2000 您的住址: USA
文章: 245
|
補上CrystalMark
一樣是Adaptive Read Ahead
128KB Stripe Size Write-Back 用CrystalMark 2.1.4 X64版本 這張是我Barracuda 11 500Gx4 @ RAID5 ![]() 下面這張是我的Barracuda 10 250Gx2 (單碟) @ RAID1 (後段160GB) ![]() 感覺數據不太真實 ![]()
__________________
Workstation Gigabyte EP45-UD3P | Intel Core 2 Duo E8400 oc 4.05GHz | Transcend DDR2-800 1GB x 4 (D9GMH) | WD RaptorX 150 ![]() ![]() ![]() ![]() Retired Workstation Gigabyte 8KNXP | Intel Pentium 4 2.4C oc 3GHz | Kingston HyperX DDR400 512MB x 2 | WD Raptor 36G x 2 RAID 0 @ ICH5R | XFX GeForce 6600 GT | PIONEER 120S / A109 | Antec TrueBlue 480 Server Gigabyte G33M-DS2R | Intel Core 2 Duo E6750 | DDRII-800 2GB x 4 (Micron) | Dell Perc 6/i RAID Controller | Seagate Barracuda 10 250GBx2 @ RAID1 | Seagate Barracuda 11 500GBx4 @ RAID5 | Intel Pro/1000 PT Dual Port Server Adapter | Pioneer DVR-215BK | AcBel R8 525W Retiring Server MSI K7N2GM2-LSR | AMD Sempron 2600+ | PQI DDR400 512MB x 2 | HGST 60GXP x 2 RAID 1 @ nvraid | GeForce4 MX IGP | Intel Pro 1000 MT Desktop Adapter | Toshiba M1802 | Plextor 40/12/40A | Cooler master eXtreme 430 Notebook SONY TR3AP2 | Intel Pentium M 1.0 ULV | DDR266 512MB x 2 | HGST 1.8" 40G | 10.4" WXGA | Intel 2200BG Network INTEL NIC on Server / Workstation / Notebook | Synology DS-1010+ | DD-WRT on ASUS WL-520GU | HP ProCurve 1810G-8 Switch | 3M Cat6 Wiring | Linksys PAP2 VoIP Adapter |
![]() |
![]() |
Master Member
加入日期: Mar 2004 您的住址: 亞洲.台灣.台北
文章: 2,054
|
建議 用 32K or 64K
128K 太大了.... 請看這篇 http://www.pcdvd.com.tw/showthread.php?t=719297 當初 軟體XOR , 32K , 64K , 128K , 影響很多..... |
![]() |
![]() |
Major Member
![]() 加入日期: Dec 2000 您的住址: USA
文章: 245
|
引用:
我覺得CrystalMark的數據是直接從我卡上的RAM得到的傳輸率吧 剛剛試了一下Everest Disk Benchmark (Read Suite Test) ![]() 這個數據正常多了 ![]()
__________________
Workstation Gigabyte EP45-UD3P | Intel Core 2 Duo E8400 oc 4.05GHz | Transcend DDR2-800 1GB x 4 (D9GMH) | WD RaptorX 150 ![]() ![]() ![]() ![]() Retired Workstation Gigabyte 8KNXP | Intel Pentium 4 2.4C oc 3GHz | Kingston HyperX DDR400 512MB x 2 | WD Raptor 36G x 2 RAID 0 @ ICH5R | XFX GeForce 6600 GT | PIONEER 120S / A109 | Antec TrueBlue 480 Server Gigabyte G33M-DS2R | Intel Core 2 Duo E6750 | DDRII-800 2GB x 4 (Micron) | Dell Perc 6/i RAID Controller | Seagate Barracuda 10 250GBx2 @ RAID1 | Seagate Barracuda 11 500GBx4 @ RAID5 | Intel Pro/1000 PT Dual Port Server Adapter | Pioneer DVR-215BK | AcBel R8 525W Retiring Server MSI K7N2GM2-LSR | AMD Sempron 2600+ | PQI DDR400 512MB x 2 | HGST 60GXP x 2 RAID 1 @ nvraid | GeForce4 MX IGP | Intel Pro 1000 MT Desktop Adapter | Toshiba M1802 | Plextor 40/12/40A | Cooler master eXtreme 430 Notebook SONY TR3AP2 | Intel Pentium M 1.0 ULV | DDR266 512MB x 2 | HGST 1.8" 40G | 10.4" WXGA | Intel 2200BG Network INTEL NIC on Server / Workstation / Notebook | Synology DS-1010+ | DD-WRT on ASUS WL-520GU | HP ProCurve 1810G-8 Switch | 3M Cat6 Wiring | Linksys PAP2 VoIP Adapter |
|
![]() |
![]() |