|
||
|
*停權中*
加入日期: Nov 2002
文章: 32
|
請教一個電腦問題
朋友的電腦有天突然出現以下的訊息就停住了
之前從未遇過這種毛病不知如果解決 請有經驗的大大...不吝指教.. Windows could not start because of a general computer hardware configuration problem. Attempting to load an x64 operating system, however this system does not have the APIC configured. Check your firmware settings. Make sure that the firmware has enabled the advanced programmable interrupt controller (APIC) on this system. If the firmware does not have an APIC setting, please contact the system manufacturer for a firmware update to enable the local APIC. |
|||||||
2008-05-07, 07:58 PM
#1
|
|
|
Major Member
 加入日期: Jan 2000
文章: 174
|
到 BIOS 中將 APIC Mode 開啟
|
||
|
2008-05-07, 08:10 PM
#2
|
|
|
*停權中*
加入日期: Nov 2002
文章: 32
|
恩...
我在BIOS中只有找到ACPI.. 也對CMOS放電清除過了.. 還是沒辦法使用出現一樣的訊息 |
|
2008-05-08, 11:56 AM
#3
|
|
|
Amateur Member
 加入日期: Feb 2007
文章: 46
|
老一點的PCI卡可能不支援APIC
不然就是某介面卡故障了 |
|
2008-05-08, 12:11 PM
#4
|
|
|
*停權中*
加入日期: Nov 2002
文章: 32
|
他的電腦是整合型主機板
未外接任何的介面卡.. 所以這樣說來應該是主機板故障嚕...0 0 要送修主機板想到就頭痛.... |
|
2008-05-08, 01:11 PM
#5
|
|
|
Amateur Member
加入日期: Feb 2007
文章: 46
|
BIOS 調到default ,進window安全模式檢查晶片組driver,登錄檔
再不行重灌window,再不行...我投降 |
|
2008-05-08, 02:56 PM
#6
|
|
|
*停權中*
加入日期: Nov 2002
文章: 32
|
BIOS有load default....
連window都進不去..無法檢查driver.. 重灌win倒還未試過.. |
|
2008-05-08, 04:19 PM
#7
|
|
