燒DL(D9)片經驗分享
原本小弟NEC2500是刷Herrie 1.07v2 Dual Layer Bitsetting Beta 5軔體..發現要燒PHILIPS CD2 DL沒辦法燒...後來跟朋友討論是軔體關係心一狠乾脆刷NEC2510 軔體結果順利DL片子...燒錄方法也簡單直接把原版光碟片(來源片)放DVD ROM、DL燒片當然是放燒錄機上...先啟動ANYDVD 再啟動NERO 用飛機式直接對拷
以下附說明跟軔体提供參考
NEC2500 to 2510
Media Information
Region information N/A not a DVD-VIDEO
Media code/Manufacturer ID PHILIPS CD2
Media Product Revision Number 00h
Format Capacity Blank Disc
Free Blocks 4253024256
Free Capacity 7.96GB(8.55GB)
Book Type DVD+R DL
Media Type DVD+R DL
Manufacturer Rated Speed Unknown
Available Write Descriptor CLV 2.4x 3324KBps
Linear Density Blank Disc
Track Density Unknown
Number of Layers 1
------------------------------------------------------------------------------------------------------
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 1999/9/10 下午 12:06:00
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 2004/7/28 下午 04:51:12
Nero版本: 6.6.0.1
燒錄器： <_NEC DVD_RW ND-2510A> 版本: 2.F8 - HA 4 TA 3 - 6.6.0.1
界面卡驅動程式： <> HA 4
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <PIONEER DVD-ROM DVD-121 >版本: 1.07 - HA 2 TA 0 - 6.6.0.1
界面卡驅動程式： <atapi> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : ST340016A 3.10 Pnp680r Port 0 ID 0 DMA: Off
DiskPeripheral : ST340824A 3.28 Pnp680r Port 0 ID 1 DMA: Off
DiskPeripheral : ST380021A atapi Port 1 ID 0 DMA: On
DiskPeripheral : Maxtor 6Y120P0 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD-ROM DVD-121 atapi Port 2 ID 0 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
PIONEER DVD-ROM DVD-121 G: CDRom0
AXV CD/DVD-ROM R: CDRom1
_NEC DVD_RW ND-2510A H: CDRom4
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 159MB (163668kB)
Memory in use : 68 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
23.11.2004
DVD飛機式複製
下午 09:07:33 #1 Text 0 File Reader.cpp, Line 127
Reader running
下午 09:07:33 #2 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD_RW ND-2510A running
下午 09:07:33 #3 Text 0 File DVDCopy.cpp, Line 267
DVD Track-Information from source disc
S01 T01 Con 0x14 Start 0 Len 4087383 (gap 0) Blank 0 Res 0 Dmg 0 Mode TRM_DATA_MODE1 (0)
下午 09:07:33 #4 Text 0 File DVDCopy.cpp, Line 370
Max -1 tracks of 1 allowed to copy
1: 0 - 4087383 = 4087383, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
下午 09:07:33 #5 Text 0 File Burncd.cpp, Line 3117
Turn on 光碟一次燒錄(DAO), using DVD media
下午 09:08:13 #6 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 4087382 (908:18.32, 7983MB)
下午 09:08:13 #7 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)
下午 09:08:13 #8 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: _NEC DVD_RW ND-2510A, Media type: DVD+R9 Double Layer
下午 09:08:13 #9 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: 不明. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.)
下午 09:08:13 #10 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - 資料(模式1))
2 indices, index0 (150) not provided
original disc pos #0 + 4087383 (4087383) = #4087383/908:18.33
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 4087383 blocks [_NEC DVD_RW ND-2510A]
--------------------------------------------------------------
下午 09:08:13 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1047
Prepare recorder [_NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 8370960384, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
4087383 | lead-out | 1 | 0x00 | 0x41
下午 09:08:13 #12 Phase 36 File dlgbrnst.cpp, Line 1853
以2.4x (3,324 KB/s)的速度開始燒錄
下午 09:08:13 #13 Text 0 File ThreadedTransferInterface.cpp, Line 2497
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
下午 09:08:13 #14 Text 0 File DVDPlusDualLayer.cpp, Line 397
Disc finalized, LBA total Image size: 4087383 (7983MB), Last LBA L0: 2043695 (3991MB)
下午 09:08:45 #15 Text 0 File DVDPlusDualLayer.cpp, Line 481
L0 Data Zone Capacity set to 2043696 (1F2F30h, 3991MB) -> OK, confirmed setting
下午 09:08:45 #16 CDR -1205 File DVDPlusDualLayer.cpp, Line 506
光碟第一層燒錄中
下午 09:08:45 #17 Text 0 File DVDPlusDualLayer.cpp, Line 514
Start writing layer 1 at address 0 (0h)
下午 09:08:45 #18 SCSI -1066 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 4, TA 3, LUN 0, buffer 0x03FC6000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
下午 09:08:45 #19 Text 0 File DVDR.cpp, Line 5656
Book Type counter: 498, Book Type selected in EEPROM, command version 4
下午 09:08:45 #20 SCSI -1066 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 4, TA 3, LUN 0, buffer 0x03FC8000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xC9 0x02 0x02 0x01 0x42 0x54 0x59 0x50 0x45 0x01 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
下午 09:08:45 #21 Text 0 File DVDR.cpp, Line 5656
Book Type counter: 498, Book Type selected in EEPROM, command version 4
下午 09:08:45 #22 Text 0 File DVDR.cpp, Line 5656
Book Type counter: 498, Book Type selected in EEPROM, command version 4
下午 09:08:45 #23 Text 0 File DVDR.cpp, Line 4877
Drive: _NEC DVD_RW ND-2510A
Book Type request: DVD-ROM, write to RAM
select Book Type setting from RAM
下午 09:08:45 #24 CDR -1207 File DVDR.cpp, Line 4608
Book Type automatically set to: DVD-ROM
下午 09:08:45 #25 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 41:49,909 (2509909ms) -> OK
下午 09:08:45 #26 Text 0 File DVDPlusRW.cpp, Line 632
Start write address at LBA 0
DVD high compatibility mode: Yes
下午 09:29:18 #27 CDR -1206 File DVDPlusDualLayer.cpp, Line 1680
光碟第二層燒錄中
下午 09:29:18 #28 Text 0 File DVDPlusDualLayer.cpp, Line 1687
Perform layer 1 to 2 jump before writing at address 2043712 (1F2F40h)
下午 09:49:38 #29 Text 0 File WriterStatus.cpp, Line 116
<_NEC DVD_RW ND-2510A > start writing Lead-Out at LBA 4087383 (3E5E57h), lenght 0 blocks
下午 09:49:38 #30 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
下午 09:50:31 #31 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK
下午 09:50:31 #32 Text 0 File DVDR.cpp, Line 5656
Book Type counter: 498, Book Type selected in RAM, command version 4
下午 09:50:31 #33 Text 0 File DVDR.cpp, Line 5656
Book Type counter: 498, Book Type selected in RAM, command version 4
下午 09:50:32 #34 Text 0 File DVDR.cpp, Line 4877
Drive: _NEC DVD_RW ND-2510A
Book Type request: DVD-ROM, write to RAM
select Book Type setting from RAM
下午 09:50:32 #35 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK
下午 09:50:32 #36 Phase 37 File dlgbrnst.cpp, Line 1853
以2.4x (3,324 KB/s)的速度燒錄完畢