$ffffffffff ---------------------------------------------------
$ffffffffff Northbridge information
$ffffffffff ---------------------------------------------------
$0400000000 Description : unknown
$0400000001 Vendor ID : 8086 (Intel)
$0400000002 Device ID : 2578
$0400000003 AGP bus : revision 3.0
$0400000004 AGP status : enabled
$0400000005 AGP rate : 4x 8x supported, 8x selected
$0400000006 AGP SBA : supported, enabled
$0400000007 AGP FW : supported, enabled
$ffffffffff ---------------------------------------------------
$ffffffffff Display adapter information
$ffffffffff ---------------------------------------------------
$0000000000 Description : NVIDIA Quadro FX 1100
$0000000001 Vendor ID : 10de (NVIDIA)
$0000000002 Device ID : 034e
$0000000003 Location : bus 1, device 0, function 0
$0000000004 Bus type : AGP revision 3.0
$0000000005 AGP status : enabled
$0000000006 AGP rate : 4x 8x supported, 8x selected
$0000000007 AGP SBA : supported, enabled
$0000000008 AGP FW : supported, enabled
$0000000009 Base address 0 : f8000000 (memory range)
$000000000a Base address 1 : e0000000 (memory range)
$000000000b Base address 2 : none
$000000000c Base address 3 : none
$000000000d Base address 4 : none
$000000000e Base address 5 : none
$ffffffffff ---------------------------------------------------
$ffffffffff NVIDIA specific display adapter information
$ffffffffff ---------------------------------------------------
$0100000000 Graphics core : NV36 revision A1
$0100000001 Hardwired ID : 034e
$0100000002 Memory bus : 128-bit
$0100000003 Memory type : DDR (RAM configuration 00)
$0100000004 Memory amount : 131072KB
$0100000005 Core clock : 300.857MHz
$0100000006 Memory clock : 450.000MHz (900.000MHz effective)
$0100000007 Reference clock : 27.000MHz
$ffffffffff ---------------------------------------------------
$ffffffffff NVIDIA graphics processor registers
$ffffffffff ---------------------------------------------------
$0200000000 NV_PMC_BOOT_0 : 436e00a1
$0200001080 NV_PBUS_DEBUG_0 : 00000f00
$0200001084 NV_PBUS_DEBUG_1 : 00015749
$0200001088 NV_PBUS_DEBUG_2 : 00020222
$020000108c NV_PBUS_DEBUG_3 : 00000092
$02000010b0 NV_PBUS_DEBUG_CTRIM_0 : ffffffff
$02000010b4 NV_PBUS_DEBUG_CTRIM_1 : 00f00000
$02000010b8 NV_PBUS_DEBUG_CTRIM_2 : 00000000
$02000010bc NV_PBUS_DEBUG_CTRIM_3 : 00000000
$02000010c4 NV_PBUS_DEBUG_CTRIM_4 : ffffffff
$02000010c8 NV_PBUS_DEBUG_CTRIM_5 : 00000000
$02000010cc NV_PBUS_DEBUG_CTRIM_6 : ffffffff
$02000010e0 NV_PBUS_DEBUG_PRIV_ASRC : 00000000
$0200100000 NV_PFB_BOOT_0 : 00000000
$0200100080 NV_PFB_DEBUG_0 : f0000000
$0200100200 NV_PFB_CFG : 53000375
$020010020c NV_PFB_CSTATUS : 08000000
$0200100220 NV_PFB_TIMING0 : 070e1915
$0200100224 NV_PFB_TIMING1 : 08010708
$0200100228 NV_PFB_TIMING2 : 00250508
$02001002c0 NV_PFB_MRS : 00000862
$02001002c4 NV_PFB_EMRS : 0010064e
$0200101000 NV_PEXTDEV_BOOT_0 : a170e083
$0200680500 NV_PRAMDAC_NVPLL_COEFF : 00011a07
$0200680570 NV_PRAMDAC_NVPLL_COEFF_1 : 80000601
$0200680504 NV_PRAMDAC_MPLL_COEFF : 00001403
$0200680574 NV_PRAMDAC_MPLL_COEFF_1 : 80000501
$020068050c NV_PRAMDAC_PLL_COEFF_SELECT : 10000f00

為何5600刷5600ultra都花屏,
TOSP跟mBGA的數值在哪裡,怎麼找出來.

還有一些廠商的bios沒有分2D,3D頻率,就一個頻率而已,
怎麼回事.

還有RAMDAC是400MHz,改成450MHz你會嗎.

這就是我覺得5600ultra困難的地方,
因為數值上,核心400,記憶體也是400,ramdac也是400,
若找出所有409C,誰知道哪個是哪個的.

嗯
不過我希望PO的時候
最少也PO一下記憶體型號
如果不想拔散熱片
也PO一下大概是哪一個廠牌

另外RAMDAC可不可以從BIOS裡面改 目前並不了解

5600要刷5600 ULTRA的 請找前面文章
大致上要改兩三格地方
不過沒有意義

至於大濕你說的畫面會變好 我感覺不到...

前面文章沒有說TOSP跟mBGA詳細改法,你在說詳細可嗎.

現代4納秒的,就是技嘉那一款,但是我刷華碩的bios,
它ramdac好像是這樣改,就是不同解析度,頻率都不同,自動變速的,
其實我懷疑它VS跟PS單元的頻率也是分別跑不同於主頻的較低頻率,
搞不好除以2了,應該找出來固定才好.

之前曾經買過青雲的5200p(FX5200 128bit)
上面的記憶體是hynix的3.6ns記憶體....
理論時脈應該是555mhz的
但是奇怪的是他的極限時脈是落在460~470之間...
再超上去就是會當機破圖...
我想可能也是跟記憶體的timing有關係..
只可惜現在那張卡已經脫手了...
我想現在的旌宇5900xt或許也是因為timing的關係....
讓他們的2.8ns記憶體可以輕鬆超到850MHZ以上吧....