Junior Member
加入日期: Dec 2002 您的住址: Hong Kong
文章: 725
|
引用:
請問你用的版本是...........? 因新版已修正很多Bug, 尤其是有關RealVideo的選項也較前多亦較穩........(但當然有其他bug.....) |
||||||||
2003-02-22, 07:37 PM
#51
|
Junior Member
加入日期: Dec 2002 您的住址: Hong Kong
文章: 725
|
剛到dv.club.com.tw一遊, 發現那邊有大大在發報Canopus procoder的1.2版.......
|
||
2003-02-23, 08:55 AM
#52
|
Junior Member
加入日期: Dec 2002 您的住址: Hong Kong
文章: 725
|
給各位大大參考歷代的Canopus Procoder的修訂內容.......
留意就算1.2至1.25版也或多或少的有Bug,可能正是你們遇到的. (copied from the www.canopus.com) v1.25 - New MPEG encoder option - "DVD-compatibility mode" - various bug fixes v1.21 - Issue with Canopus reference DV AVI import resolved. v1.20 - RealVideo 9 (Helix) support - Multi-bitrate stream configuration support for Real and Windows Media - Discard field when scaling height by 1/2 added to Transcoding Settings - Command-line parameters added to droplets - Overwrite all files option added to Target File Warning dialog - Preview display now compensates for pixel aspect ratio - Improved system memory usage - Increased quality of NTSC<->PAL conversion - Disable completion sound option added to Application Settings dialog - Support import of raw DV (.dv, .dif) files - MPEG file import detects flags (16:9, field order, etc) properly - Improved support for MJPEG and Type 1 DV AVIs - Support choosing target to preview in Convert tab - Adaptive Deinterlacer improved - Support adjusting A/V interleaving on DV files - DV exporter now writes (new) timecode - Split by size supported for DV exporter - AVI expoter supports audio codec options, etc. - MPEG quality improved in special cases (fades, etc.) - MPEG-2 Main Profile at High Level (MP@HL) support - MPEG target supports setting 3:2 pulldown flag - MPEG target supports non-constrained (i.e. 640x480) MPEG-1 settings - MPEG target supports setting DC precision - PCM Audio exporter added (just exports the audio as PCM .WAV file) - various bug fixes v1.0 SP1 - Added Wave audio output to MPEG target - Scale after Crop option added to Crop filter - Premiere exporter field order issue corrected - Premiere exporter speed increased - various bug fixes v1.0 - Initial release |
2003-02-23, 02:00 PM
#53
|
Golden Member
加入日期: Apr 2001
文章: 2,513
|
再次謝謝 cwilson 網友熱心的幫忙~
|
2003-02-25, 12:28 PM
#54
|
Junior Member
加入日期: Dec 2002 您的住址: Hong Kong
文章: 725
|
真是太快!!!!, www.dvclub.com.tw
已有位姓郭的大大在非線性編輯討論區內放出Canopus Procoder的1.25update 了...........(那邊方才發報1.2版, 現在已可下載1.25版,實在效率驚人, 但我未有試用, 不知效果如何..) 此文章於 2003-02-25 10:02 PM 被 cwilson 編輯. |
2003-02-25, 09:40 PM
#55
|
Power Member
加入日期: Feb 2003 您的住址: TPE
文章: 659
|
引用:
已下載試過,安裝時需要硬體鎖,就是仍未破解..殘念 |
|
2003-02-26, 10:53 AM
#56
|
Junior Member
加入日期: Dec 2002 您的住址: Hong Kong
文章: 725
|
引用:
通常Canopus procoder 的batch convert 可以以下方式達成 1. 將要處理的檔案放進source 環境下的source list內,(確定stitch項內沒有被選取), 然後遵照一般程序在Target環境下選擇要輸出的format及其他細節的設定或在target parameter 再設定Base name*及path 後, 便可選擇Convert進行輸出; 而採用batch convert後, 應有相同数量及同名稱的完成檔(但extension會不同, 並會以01,02…..作出區分, 因為base name*暫時未有其他的設定)在convert 環境下的output list內可見……(參照以下照片). 2. 另一種方法當然是在tool這目錄底下選取droplet功能,作自動的檔案轉, 這方法最適合長期有大量檔案作轉換的人士. 但你的問題亦有可能出於版本的問題, 因procoder往往在demo版上削去部分功能, 以保障自己的…… 此文章於 2003-02-28 09:01 AM 被 cwilson 編輯. |
|
2003-02-28, 08:57 AM
#58
|
Basic Member
加入日期: Feb 2003
文章: 23
|
請問要將檔案轉成rm檔時,最高只有512可選
有沒有辦法有更高的畫質可選啊 |
2003-02-28, 09:18 AM
#59
|
Junior Member
加入日期: Dec 2002 您的住址: Hong Kong
文章: 725
|
引用:
512k rm 以上, 應該還有… 700k VBR 768k DSL or Cable 1M VBR 1.5M VBR Download 等選擇. 這些選項可在target環境內, target parameter下的Profile Selection裡可找得到 附以下檔請參考 |
|
2003-02-28, 09:34 PM
#60
|