我的是P-III C 700MHZ
RAM 512MB
跑光棒是跑2條就進入桌面
但是要等30秒左右程式才全部OK
作業系統我是裝BB-XP v5.1(SP1)

我用2K3跑差不多5條吧~末代K7-SP 2200+

家裡另一台K7(D-800)
用6-7年前的S牌HDD 10G
開機要跑30幾條吧XDXD
同樣PCHDD改用梭魚3跑個7條吧XD

看過最快的是網友用"I-RAM"
真他喵的快~連一條都沒跑就開機好XD
害我差點想敗下去

想到要在買4G記憶體就.....Orz

沒在關機的
1234567890

看到桌面可以開使操作的時間比較準吧?

我都沒優化要45秒左右,光棒3~4條好像XD 按下電源發一下呆就開好了...剛剛好XD

兩個MAXTOR 200G SATA作NV RAID就夠了

現在想看光棒還看不到

匯流排極限120MB/S +- 在跑

給樓主提醒一下

系統優化比較重要

光棒跟CPU速度沒啥關係

我特別用BARTON去測過

超到2.5G跟降到600MHZ的時間是一樣的

連進WINDOWS以後也是一樣

不過我那時優化過後

開機幾乎沒執行程式

EnablePrefetcher這個選項我是直接調成0, 就是Disable Prefetcher.
K7 1.4G(200x7)進XP只要一條光棒, 進入XP後確實是比Enable Prefetcher要多些時間才能使用.
不過我的原則是系統盡量乾淨, 不要跑一些不必要的啟動程式, 所以也是只差個幾秒而已.

討論這個光棒跑多久應該是對常開關機的人才有意義(對於不關機的人來說, 一年可能要等光棒的機會沒幾次), 所以如果在每次使用到關機前, 一些不會常用到的程式根本就沒有Prefetch的必要.

在M$的網站找了老半天..
也只有這個...
from Microsoft :
---------------------------------------------------------------------
How to Disable the Prefetcher Component in Windows XP
View products that this article applies to.
Article ID : 307498
Last Review : June 11, 2002
Revision : 1.0
This article was previously published under Q307498
IMPORTANT: This article contains information about modifying the registry. Before you modify the registry, make sure to back it up and make sure that you understand how to restore the registry if a problem occurs. For information about how to back up, restore, and edit the registry, click the following article number to view the article in the Microsoft Knowledge Base:
256986 (http://support.microsoft.com/kb/256986/EN-US/) Description of the Microsoft Windows Registry
SUMMARY
This article describes how to disable the Windows XP Prefetcher component. The Prefetcher component in Windows XP is part of the Memory Manager, and helps to shorten the amount of time it takes to start Windows and programs. You may want to disable this component for troubleshooting scenarios or in lab environments.
MORE INFORMATION
WARNING: If you use Registry Editor incorrectly, you may cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that you can solve problems that result from using Registry Editor incorrectly. Use Registry Editor at your own risk.

To disable the Prefetcher component, use Registry Editor (Regedit.exe) to locate the EnablePrefetcher value under the following key in the registry:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\PrefetchParameters
Change the value of the EnablePrefetcher value to 0, and then quit Registry Editor. The next time you start your computer, the Prefetcher component will not start.
---------------------------------------------------------------------

有沒有人能在M$的網站找到EnablePrefetcher的Registry Value的說明??
我在Windows2000的Resources Kit沒看到這個Registry Value.....

屋...
剛剛在winguides找了一下..
找到關於他的說法了..
About Windows Prefetcher Service
from winguides :
---------------------------------------------------------------------
Manage the Windows Prefetcher Service (Windows XP) Popular
The Windows XP Prefetcher component helps to shorten the amount of time it takes to start programs by fetching and storing commonly used files. This tweak allows you to manage the service and cache.

Registry Settings
System Key: [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\
Memory Management\PrefetchParameters]
Value Name: EnablePrefetcher
Data Type: REG_DWORD (DWORD Value)
Value Data: (0 = disabled, 1 = Application launch prefetching, 2 = Boot prefetching, 3 = Both prefetching)
---------------------------------------------------------------------
給定的range也只有0~3..
我不曉得其他什麼怪數字是從哪來的(什麼4阿5阿還有10的.....)

我知道坊間某些雜誌或書籍不外乎就是大抄特抄...!!
然後有些就是大錯特錯...