PCDVD數位科技討論區
PCDVD數位科技討論區   註冊 常見問題 標記討論區為已讀

回到   PCDVD數位科技討論區 > 電腦硬體討論群組 > 儲存媒體討論區
帳戶
密碼
 

  回應
 
主題工具
bonoc
Senior Member
 
bonoc的大頭照
 

加入日期: Sep 2003
您的住址: 台中
文章: 1,495
引用:
作者chaotommy
lag

lag很大
     
      
__________________
只看得見別人在過爽日子嗎?

什麼時候努力讓自己過得爽一點呢?
舊 2011-06-01, 04:27 PM #11
回應時引用此文章
bonoc離線中  
ST-15K.3
Major Member
 
ST-15K.3的大頭照
 

加入日期: Feb 2006
您的住址: 滄者極限
文章: 272
還有很多人不知道說....回個Lag...

代表說您們都知道了...這也不錯啦

但是如果您們早就知道...為什麼不多提醒網友們?

只是在文章出現時..回一個..Lag...
 
__________________

此文章於 2011-06-01 04:59 PM 被 ST-15K.3 編輯.
舊 2011-06-01, 04:54 PM #12
回應時引用此文章
ST-15K.3離線中  
andrew0701
Power Member
 

加入日期: Jan 2008
文章: 652

此文章於 2011-06-01 05:24 PM 被 andrew0701 編輯.
舊 2011-06-01, 05:19 PM #13
回應時引用此文章
andrew0701離線中  
ST-15K.3
Major Member
 
ST-15K.3的大頭照
 

加入日期: Feb 2006
您的住址: 滄者極限
文章: 272


感謝提供

這樣回文有意義多了
__________________
舊 2011-06-01, 05:23 PM #14
回應時引用此文章
ST-15K.3離線中  
我要開機啦
Advance Member
 

加入日期: Sep 2005
文章: 307
請問一下
上面說WD硬碟有錯時會進行2分鐘的修復動作
但HBA允許的修復時間僅為7~15秒

那是不是說硬碟在進行錯誤修復其實只要花幾秒鐘而已
不然為什麼HBA會把時間定在7~15秒

引用:
作者vxr
這是在ATA硬碟下會發生的問題...
只要實作ERC功能的HDD就ok了....

所以SAS的硬碟沒有這種問題嗎
舊 2011-06-01, 05:46 PM #15
回應時引用此文章
我要開機啦離線中  
魚骨頭
Junior Member
 
魚骨頭的大頭照
 

加入日期: Jun 2010
文章: 803
引用:
作者BBCT
簡單說就是要逼用到RAID功能的使用者花多一點錢買RE系列嘛!


就是要強迫購買企業版跟迅猛龍系列

話說1T的企業版可以買三顆藍標500G了
__________________
良興卡號:13214833

此文章於 2011-06-01 05:49 PM 被 魚骨頭 編輯.
舊 2011-06-01, 05:48 PM #16
回應時引用此文章
魚骨頭離線中  
vxr
Elite Member
 
vxr的大頭照
 

加入日期: May 2002
您的住址: 地球的上面..
文章: 5,854
Exclamation

引用:
作者我要開機啦
請問一下
上面說WD硬碟有錯時會進行2分鐘的修復動作
但HBA允許的修復時間僅為7~15秒

那是不是說硬碟在進行錯誤修復其實只要花幾秒鐘而已
不然為什麼HBA會把時間定在7~15秒


所以SAS的硬碟沒有這種問題嗎

"但HBA允許的修復時間僅為7~15秒"
這和廠商的RAID設計有關....

"所以SAS的硬碟沒有這種問題嗎 "
量身訂做的SAS規範怎麼會有這種問題.......
但是這塊和SMART有相關係...
來看看我以前寫的這串...
這是以LSI MegaRAID Controller的作法
>>Q: WebBIOS中有一個SMART Polling屬性? 是做甚麼用的呢?
>>A: 主要用以輪詢一段時間, 預設是300秒. 透過一個特殊的polling timer來記時, 當達到300秒的時候, RAID controller便會要求HDD的SMART報告. 診斷HDD的當前運作情況.

>>Q: TLER/ERC/CCTL會不會跟SMART Polling有關係呢?..
>>A: 多多少少有些關係, 但是不是SMART Polling跟TLER/ERC/CCTL成絕對關係.
SMART polling and TLER are only related in the sense that both deal with disk errors. The controller does SMART poll, but this is not related to TLER.
TLER/ERC/CCTL的設計就是防範當error correction超過RAID controller所規定的threshold時, RAID controller將會把超時的HDD判定為failed並且將他drop, 也許這個error correction可能是deep的情況. 關於LSI RAID controller所規定的threshold, LSI表示如下:
The time-out threshold is ten seconds.
前面講過, 當LSI RAID controller的polling timer達到300秒的時候, 變遍歷收集每顆硬碟的SMART資訊. 在TLER/ERC/CCTL部分, 如果取得的SCT ERC Timer偵測發現超過規定的threshold, 也就是10秒的情況下. LSI RAID controller便會將該超時的HDD給強制drop. 在這個案例下, SCT ERC Timer記載的value便會是0秒, 也就是unlimited. 如果帶有TLER/ERC/CCTL支持的HDD, 通常SCT ERC Timer設定會是在7 sec以下, 這時SCT ERC Timer<timeout threshold. 便不會將HDD給強制drop掉. 這將會提升對Storage System很大的穩定性.
LSI=> A drive will drop after 10 seconds

但是ERC不能開嗎??..
未必...
WD開不了但是其他牌的話.....
C:\Program Files (x86)\smartmontools\bin>smartctl --scan
/dev/sdi -d ata [ATA]
------------------------------------------------------------------------------------------------------
C:\Program Files (x86)\smartmontools\bin>smartctl -a /dev/sdi
smartctl 5.40 2010-10-16 r3189 [i686-w64-mingw32-2008r2(64)] (sf-win32-5.40-1)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: Hitachi HDS723020BLA642
Serial Number: MN1220F30GYSED
Firmware Version: MN6OA580
User Capacity: 2,000,398,934,016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Wed Mar 02 11:36:18 2011 TST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command
from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (18950) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off supp
ort.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 255) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

------------------------------------------------------------------------------------------------------
C:\Program Files (x86)\smartmontools\bin>smartctl -l scterc /dev/sdi
smartctl 5.40 2010-10-16 r3189 [i686-w64-mingw32-2008r2(64)] (sf-win32-5.40-1)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
------------------------------------------------------------------------------------------------------
C:\Program Files (x86)\smartmontools\bin>smartctl -l scterc,70,70 /dev/sdi
smartctl 5.40 2010-10-16 r3189 [i686-w64-mingw32-2008r2(64)] (sf-win32-5.40-1)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
SCT Error Recovery Control:
Read: 70 (7.0 seconds)
Write: 70 (7.0 seconds)
------------------------------------------------------------------------------------------------------
C:\Program Files (x86)\smartmontools\bin>smartctl -l scterc /dev/sdi
smartctl 5.40 2010-10-16 r3189 [i686-w64-mingw32-2008r2(64)] (sf-win32-5.40-1)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
SCT Error Recovery Control:
Read: 70 (7.0 seconds)
Write: 70 (7.0 seconds)

------------------------------------------------------------------------------------------------------

此文章於 2011-06-01 06:16 PM 被 vxr 編輯.
舊 2011-06-01, 06:12 PM #17
回應時引用此文章
vxr離線中  
god
*停權中*
 

加入日期: Oct 2005
文章: 238
我用WD 2TB綠標2顆組RAID1
用銳銨的陣列盒,用好幾個月了
都正常
舊 2011-06-01, 09:39 PM #18
回應時引用此文章
god離線中  
Long GS
Junior Member
 
Long GS的大頭照
 

加入日期: Mar 2003
文章: 855
引用:
作者god
我用WD 2TB綠標2顆組RAID1
用銳銨的陣列盒,用好幾個月了
都正常

官方都說了!不建議!!

硬要折紙飛機,飛上天,摔了,也只能自認倒霉.

資料是您自己的...
舊 2011-06-01, 10:04 PM #19
回應時引用此文章
Long GS離線中  
god
*停權中*
 

加入日期: Oct 2005
文章: 238
引用:
作者Long GS
官方都說了!不建議!!

硬要折紙飛機,飛上天,摔了,也只能自認倒霉.

資料是您自己的...


他的意思是企業用戶不建議使用
LSI的HBA和外面市售陣列盒規範不一樣
所以沒這問題
舊 2011-06-01, 10:23 PM #20
回應時引用此文章
god離線中  


    回應


POPIN
主題工具

發表文章規則
不可以發起新主題
不可以回應主題
不可以上傳附加檔案
不可以編輯您的文章

vB 代碼打開
[IMG]代碼打開
HTML代碼關閉



所有的時間均為GMT +8。 現在的時間是11:12 PM.


vBulletin Version 3.0.1
powered_by_vbulletin 2025。