PCDVD數位科技討論區
PCDVD數位科技討論區   註冊 常見問題 標記討論區為已讀

回到   PCDVD數位科技討論區 > 數位影音討論群組 > DVD 討論區
帳戶
密碼
 

  回應
 
主題工具
mayuka
Master Member
 
mayuka的大頭照
 

加入日期: Oct 2004
您的住址: 貓窩
文章: 1,973
引用:
作者frenthen
不好意思,我把所有的IDE通道都改為PIO!
不管在安全模式與否都會出現"Error submitting checksum"!
真奇怪,再幫幫忙吧!

Binflash - Universal firmware flasher for binary firmwares
http://binflash.cdfreaks.com/
Windows下不行的話,只好DOS下面去試了

再不行的話就真的只能把這台換到別台主機去更新了
(目前想得到最快的方法)
     
      
舊 2007-03-02, 01:55 AM #11
回應時引用此文章
mayuka離線中  
frenthen
Basic Member
 

加入日期: Nov 2005
文章: 16
引用:
作者mayuka
Binflash - Universal firmware flasher for binary firmwares
http://binflash.cdfreaks.com/
Windows下不行的話,只好DOS下面去試了

再不行的話就真的只能把這台換到別台主機去更新了
(目前想得到最快的方法)

Thank you!
I will try it!
 
舊 2007-03-02, 02:00 AM #12
回應時引用此文章
frenthen離線中  
andy0103
Major Member
 

加入日期: Jul 2003
文章: 179
進入WINDOWS的安全模式再更新...應該就可以了..
舊 2007-03-02, 02:04 AM #13
回應時引用此文章
andy0103離線中  
mayuka
Master Member
 
mayuka的大頭照
 

加入日期: Oct 2004
您的住址: 貓窩
文章: 1,973
這麼奇怪的問題沒遇到過,只能猜大概跟驅動程式有關或是某某東西起衝突(謎之衝突!!);用DOS去更新只是個規避的方式,不一定有用。
舊 2007-03-02, 02:06 AM #14
回應時引用此文章
mayuka離線中  
mayuka
Master Member
 
mayuka的大頭照
 

加入日期: Oct 2004
您的住址: 貓窩
文章: 1,973
Post

引用:
作者andy0103
進入WINDOWS的安全模式再更新...應該就可以了..

!--------------------------------!
引用:
作者frenthen
Thanks for your reply!
But in windows normal mode and safe mode always happed checksum error!
Why?
Please help to solve this issue!

引用:
作者frenthen
不好意思,我把所有的IDE通道都改為PIO!
不管在安全模式與否都會出現"Error submitting checksum"!
真奇怪,再幫幫忙吧!

!--------------------------------!
………………………………….
汗ing∼!!
舊 2007-03-02, 02:10 AM #15
回應時引用此文章
mayuka離線中  
MONKEY
Master Member
 
MONKEY的大頭照
 

加入日期: Aug 2000
您的住址: 中壢
文章: 1,963
我的是5170
接在IDE上也是無法更新
接在外接盒USB就可以更新...給你參考一下
舊 2007-03-02, 09:42 AM #16
回應時引用此文章
MONKEY離線中  
frenthen
Basic Member
 

加入日期: Nov 2005
文章: 16
引用:
作者MONKEY
我的是5170
接在IDE上也是無法更新
接在外接盒USB就可以更新...給你參考一下


我有2台desktop(P4&Core 2 Duo),都有試過但是都不行!
連USB外接盒也試過,也是不行,都是在安全模式下!
真是奇怪,難道是Windows XP的關係嗎?還是7170A的問題?
還是Windows XP優化的關係?
舊 2007-03-02, 10:35 AM #17
回應時引用此文章
frenthen離線中  
mayuka
Master Member
 
mayuka的大頭照
 

加入日期: Oct 2004
您的住址: 貓窩
文章: 1,973
引用:
作者frenthen
我有2台desktop(P4&Core 2 Duo),都有試過但是都不行!
連USB外接盒也試過,也是不行,都是在安全模式下!
真是奇怪,難道是Windows XP的關係嗎?還是7170A的問題?
還是Windows XP優化的關係?

在DOS下,能更新了嗎!?
舊 2007-03-02, 10:51 AM #18
回應時引用此文章
mayuka離線中  
frenthen
Basic Member
 

加入日期: Nov 2005
文章: 16
引用:
作者mayuka
在DOS下,能更新了嗎!?

在dos下沒試過!
是用necflash.exe嗎?
後面要接什麼命令,然後找1.03.bin檔嗎?
舊 2007-03-02, 11:27 AM #19
回應時引用此文章
frenthen離線中  
mayuka
Master Member
 
mayuka的大頭照
 

加入日期: Oct 2004
您的住址: 貓窩
文章: 1,973
引用:
作者frenthen
在dos下沒試過!
是用necflash.exe嗎?
後面要接什麼命令,然後找1.03.bin檔嗎?

就在那個網頁上,DOS32那個,網頁上有參數的範例。

引用:
Example on using Binflash
First of all scan your adapters for valid devices:
C:\>necflash -scan
This may lead to an output similar to:

Binflash - NEC version - (C) by Liggy and Herrie
Visit http://binflash.cdfreaks.com

List of supported devices:
Device : 1.0.0
Vendor : _NEC
Model : DVD_RW ND-2500A
Firmware : 1.07Now you should backup your current firmware by issueing the following command, using the device that you got during the device scan:
C:\>necflash -dump C:\OldFirmware.bin 1.0.0
After accepting the disclaimer and waiting for a few seconds you will get the file C:\OldFirmware.bin which contains your current firmware.

Now you probably want to update your drive with a new firmware. You can do so simply by calling the following command:
C:\>necflash -flash C:\NewFirmware.bin 1.0.0
If you accept the disclaimer and wait for a few seconds again, the burner is updated with the firmware from C:\NewFirmware.bin

The following command is used to set the default booktype for DVD+R to DVD-ROM:
C:\>necflash -setbt DVD+R DVD-ROM perm 1.0.0
For DVD+R, DVD+RW and DVD+R-DL you can set the booktype to DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW and DVD+R-DL. Instead of using perm you may also use temp if you just want to use the temporary settings that only last until the next drive reset. (This feature is not supported by every firmware)
舊 2007-03-02, 11:47 AM #20
回應時引用此文章
mayuka離線中  


    回應


POPIN
主題工具

發表文章規則
不可以發起新主題
不可以回應主題
不可以上傳附加檔案
不可以編輯您的文章

vB 代碼打開
[IMG]代碼打開
HTML代碼關閉



所有的時間均為GMT +8。 現在的時間是05:14 AM.


vBulletin Version 3.0.1
powered_by_vbulletin 2025。