恭喜...祝您好運

能不用nero燒就盡量不用nero

我最近也是用nero燒壞好幾片(黃色鬼屋特價的Beta CDR片,NEC3520燒)

原本以為是片太爛的關係,改用Ashampoo Burning燒就燒錄成功
(Ashampoo Burning連瑕疵片都可以燒錄成功 ,所以燒完後要檢查是否能正常讀取)

燒DVDISO也是一樣,一樣的空片nero燒就掛改用ImgBurn燒就沒問題

所以我現在都盡量不用nero燒

客服人員：「如果是燒錄機的問題, 應該不可能只有音樂類的檔案不能燒錄.....」,
這句話沒有錯。

我覺得比較可能是閣下的問題。

我大概半年前就發生這樣的問題了...
而且已經確信是系統的問題, 因為換了台電腦就完全沒事,
其實 1640 已經算舊機種, 也早就 fades out, 所以容易有很多新發生的系統問題,
其實這也是一個警訊喔 ! 代表你系統已經有點問題了 !
我家電腦是有變慢的現象, 硬碟讀寫也很慢, 之前用 norton 時候更嚴重說,
我猜問題是P2P軟體或防毒造成的(也可能是中毒說不定), 不過我已經要重灌了 !
給你參考

今天花了3個多小時重灌,灌好以後發現....
竟然還是不能燒錄音樂類檔案阿@@!!
真是太誇張了,難道是硬體問題嗎!?

CPU E6300 (跑266x6=1600Mhz)
HD Seagate3020G
VGA 7300GT DDR3
RAM 南亞512MB DDR2 667 (跑533同步)
Board 技嘉DS3 ver1.0 (BIOS F7)
Power ZIPPY400W G1

我有重新刷過J大的韌體了....還是不能用....

能拜託大大們提供說一點意見嗎!?
難道說就如同樓上說的,這是我電腦的硬體所以不能使用1640嗎!?

貼上我失敗後儲存的LOG 蠻長的...大大們看要不要看最後就好

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2004/10/27 上午 12:35:32
Nero Version: 6.6.0.19
Internal Version: 6, 6, 0, 19b
(Nero Express)
Recorder: <BENQ DVD DD DW1640> Version: BSRB - HA 4 TA 0 - 6.6.0.19
Adapter driver: <JRAID> HA 4
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <IO8082S ZCE987M >Version: 2.0B - HA 5 TA 0 - 6.6.0.19
Adapter driver: <vaxscsi> HA 5

=== Scsi-Device-Map ===
DiskPeripheral : ST3320620AS atapi Port 0 ID 0 DMA: On
CdRomPeripheral : BENQ DVD DD DW1640 BSRB JRAID Port 4 ID 0 DMA: Off
CdRomPeripheral : IO8082S ZCE987M 2.0B vaxscsi Port 5 ID 0 DMA: Off

=== CDRom-Device-Map ===
BENQ DVD DD DW1640 G: CDRom0
IO8082S ZCE987M H: CDRom1
=======================

AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1046956kB)
Free physical memory: 579MB (593188kB)
Memory in use : 43 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

23.2.2007
音樂CD
上午 02:04:19 #1 CDADOC -1 File Cdadoc.cpp, Line 1465
Audio item log info:
Audio document burn settings:
=============================
Burn mode: DAO,
CD Text: On,
Cache disk or network files: No,
Cache small files: No,
Cache files smaller than 65536 bytes.
Audio Multisession: No
List of audio tracks:
=====================
..............................(中間刪除 太長)
上午 02:04:44 #13 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 10x (1,500 KB/s)

上午 02:04:44 #14 SCSI -1189 File Cdrdrv.cpp, Line 1183
SCSI Exec, HA 4, TA 0, LUN 0, buffer 0x03D05800
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x02
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0xFF 0x40 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x30 0x02

上午 02:04:44 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0

上午 02:04:44 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #12673

上午 02:04:44 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 2 (relocatable, no disc pos, no patch infos, orig at #0): write at #19670

上午 02:04:44 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 3 (relocatable, no disc pos, no patch infos, orig at #0): write at #30760

上午 02:04:44 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 4 (relocatable, no disc pos, no patch infos, orig at #0): write at #41865

上午 02:04:44 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 5 (relocatable, no disc pos, no patch infos, orig at #0): write at #53192

上午 02:04:44 #21 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 6 (relocatable, no disc pos, no patch infos, orig at #0): write at #64728

上午 02:04:44 #22 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 7 (relocatable, no disc pos, no patch infos, orig at #0): write at #74023

上午 02:04:44 #23 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 8 (relocatable, no disc pos, no patch infos, orig at #0): write at #86688

上午 02:04:44 #24 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 9 (relocatable, no disc pos, no patch infos, orig at #0): write at #99098

上午 02:04:44 #25 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 10 (relocatable, no disc pos, no patch infos, orig at #0): write at #105403

上午 02:04:44 #26 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 11 (relocatable, no disc pos, no patch infos, orig at #0): write at #128690

上午 02:04:44 #27 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 12 (relocatable, no disc pos, no patch infos, orig at #0): write at #141069

上午 02:04:44 #28 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 13 (relocatable, no disc pos, no patch infos, orig at #0): write at #152627

上午 02:04:44 #29 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 14 (relocatable, no disc pos, no patch infos, orig at #0): write at #164530

上午 02:04:44 #30 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 15 (relocatable, no disc pos, no patch infos, orig at #0): write at #175686

上午 02:04:44 #31 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 16 (relocatable, no disc pos, no patch infos, orig at #0): write at #189773

上午 02:04:44 #32 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 17 (relocatable, no disc pos, no patch infos, orig at #0): write at #202986

上午 02:04:44 #33 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 18 (relocatable, no disc pos, no patch infos, orig at #0): write at #211560

上午 02:04:44 #34 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 19 (relocatable, no disc pos, no patch infos, orig at #0): write at #220248

上午 02:04:44 #35 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 20 (relocatable, no disc pos, no patch infos, orig at #0): write at #232325

上午 02:04:44 #36 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 21 (relocatable, no disc pos, no patch infos, orig at #0): write at #239757

上午 02:04:44 #37 Text 0 File Mmc.cpp, Line 17108
StartDAO : CD-Text - On

上午 02:04:44 #38 Text 0 File Mmc.cpp, Line 21860
Set BUFE: Seamless Link -> ON

上午 02:05:06 #39 SCSI -1024 File Cdrdrv.cpp, Line 1437
SCSI Exec, HA 4, TA 0, LUN 0, buffer 0x0C3E0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x08
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x1A 0x00 0x00 0x1A 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x08 0x03

上午 02:05:06 #40 CDR -1024 File Writer.cpp, Line 311
Communication failure

上午 02:05:06 #41 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

上午 02:05:06 #42 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

上午 02:05:07 #43 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 10x (1,500 KB/s)

上午 02:05:07 #44 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

上午 02:05:07 #45 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.


Existing drivers:
File 'Drivers\jraid.sys': Ver=1.10.02.00 built by: WinDDK, size=43264 bytes, created 2006/6/2 下午 07:49:56 (Adapter driver for rec)
File 'Drivers\vaxscsi.sys': Ver=?.?.?.?, size=223128 bytes, created 2006/9/16 下午 08:18:00 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

看起來好像是JMB363 RAID晶片惹的禍...
解決方法..
1.更新raid驅動
ftp://driver.jmicron.com.tw/jmb36x/...QL_R1.17.11.rar
2.不使用raid的話,使用XP內建驅動"標準雙通道 PCI IDE控制器"...
僅供參考..

哇塞...還真的有人看完這一大串英文 @@! 大大 謝謝您了....明天更新完再來回報消息 ^^~

1640畢竟已經是一年前的產品了,在影音科技日新月異的進步下,可能已經有些力有未逮了,再好的3C產品,也抵擋不了不斷更新的科技趨勢啊!