All the readers in here know YOU CAN NOT remove C ring without damage it; however, this doesn't mean the others can not remove it. You need to learn a lot instead of blamming a lot. If you are not smart enough, please just keep you mouth shut and nobody will ask around.

C ring is made of elastic metal, use two pliers to slightly pull the opening apart and left it from the axis.

Do you try it before write down your opioion? Only the high-precision ball bearing works like you mentioned. However, at the low end market, the axis is simple put through the ball bearing without tight fitting to the inner rotation ring.

To see is to believe; the theory is just for the "seem-to-be-smart" guy. Try it before blame it. You need to learn a lot.

panaflo這一顆是液態軸承(也算是油封的改良型)...出廠時已經封死..不能拆開..

感謝大家釋疑...原來一開始就搞錯了...

Instead of calling other people cheating, try doing it yourself and post some photos and let other people see. Plus this is suppose to be a "Traditional Chinese" Forum, please post in Chinse if you can.

請問 高爾夫8cm風扇 如何上油 我很怕拆了 就裝不回去了 謝謝

棒呆了
又學到一招了.不錯不錯

看了幾篇相關討論後，
等過一陣子，膽量夠了，
再來幫自己的高爾夫上油！

陪林? 那是哪個部位阿? 可以請大大用箭頭指出來嗎 ?

圖借用一下