去網路連線的區域網路
的區域連線>Tcp/ip內容
使用下列ip位址
192.168.0.1
255.255.255.0

我的進到桌面還好,出現桌面以後,反而是硬碟讀得比較久

應該優化太多的反效果

軟體灌太多開機過程常駐程式多
有時防毒加速軟體偵測軟體的影響
這也是沒辦法的事總之為的是放心能安心方便的使用
與優化比較沒關

謝啦,不過我該改的都早已經改完了,不該改的也改了

我是看登錄檔的書改的,有些網站裡面沒有寫到...

我想,我進入桌面以後,硬碟會一直讀取的原因是:

1.我設定關機時,清除了記憶體的資料,重進時需要重建;
2.我設定成一進入桌面,就會微調磁碟的關係。

什麼書丫，可以分享一下書名嗎~~?

因為我想知道那些網站沒寫到的部份謝謝啦

一本是登錄檔嚴選密技,另一本是WindowsXP排困解難DIY

登錄檔的書都大同小異,我買來只是方便翻閱而已。

而且,很多有關登錄檔的資料,在微軟支援中心找得到...

這個磁碟預讀設成10幹嘛
xp可以辨識這個設定值嗎...


xp的開機光棒跟硬體效能沒什麼"直接"關係...

以前用p3-750 128m-sdram hd-8gb...磁碟預讀設成4
光棒就是跑一次後進桌面...




xp的開機速度優化登錄值

加快開關機速度
[HKEY_CURRENT_USER\Control Panel\Desktop]
"HungAppTimeout"="200"
"WaitToKillAppTimeout"="1000"

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control]
"HungAppTimeout"="200"
"WaitToKillServiceTimeout"="1000"

加快預讀能力改善開機速度
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\PrefetchParameters]
"EnablePrefetcher"=dword:00000005

把上述的登錄值複製..貼上記事本..存成"任意檔名.reg"
然後再該檔點兩下執行加入登錄..

原則上登錄值的優化已經是他人測試過的..並不需要做更多的修改


至於其他xp開機速度緩慢改善..

1.開機時不要載入過多啟動程式...
開始-->執行-->msconfig-->啟動 把不必要的啟動項目取消勾選
一般使用者最常見的如~~msoffice,nero check,quicktime...這些根本不用勾,並不會影響正常使用...

2.桌面捷徑視同"啟動"項目..盡量少弄一些捷徑..開機比較快

3.磁碟預讀...會在C:\WINDOWS\Prefetch產生預讀檔..時間一久..檔案會很多..預讀檔案太多..也會影響開機速度..要適時清理...


我的使用經驗...從p3-k7-k8...調校後光棒從沒跑超過2次的

我的配備合樓主差不多,完全沒超,
光棒跑1條多一點,進入桌面後要等一下2,3秒(跑常駐程式),

我是用xp sp3 v9的!!

[HKEY_CURRENT_USER\Control Panel\Desktop]

"HungAppTimeout"="200"
"WaitToKillAppTimeout"="1000"
這東西一般來說不會加快開關機速度的

from Microsoft :
-----------------------------------------------------------
WaitToKillAppTimeout
HKCU\Control Panel\Desktop

Data type Range Default value
REG_SZ Milliseconds in decimal 20000 (20 seconds)

Description
Determines how long the system waits for user processes to end after the user attempts to log off or to shut down Windows 2000. When the time specified in this entry expires, the End Task dialog box appears, stating that the process did not respond. If the value of AutoEndTasks is 1, the system ends the process automatically.
-----------------------------------------------------------
HungAppTimeout
HKCU\Control Panel\Desktop

Data type Range Default value
REG_SZ Milliseconds in decimal 5000

Description
Specifies how long the system waits for user processes to end after the user clicks the End Task command button in Task Manager. If this threshold is exceeded, the End Task dialog box appears, stating that the process did not respond.
-----------------------------------------------------------
WaitToKillServiceTimeout
HKLM\SYSTEM\CurrentControlSet\Control

Data type Range Default value
REG_SZ Milliseconds in decimal 20000 (20 seconds)

Description
Determines how long the system waits for services to stop after notifying the service that the system is shutting down. This entry is used only when the user issues a shut-down command by clicking the Shut Down button on the Windows 2000 Security dialog box or by selecting Shut down from the Shut Down Windows dialog box.

When the value of this entry expires, the system notifies the user that the service has not stopped. The user can either force the service task to stop or continue to wait. If the user waits, this value specifies the interval between repeated user notices that the service has not stopped.

If all services stop before this value expires, the system shuts down; it does not wait for this value to expire.

Note

Some services increase the value of this entry to provide more time for cleanup tasks.

Tip

For more information, see the Microsoft Knowledge Base link on the Web Resources page. Search the Knowledge Base for Article Q146092, or use the keyword WaitToKillServiceTimeout.