SLOT ID重複可能性的情況會導致RAID array掛掉..
這是比較麻煩的問題..

回報給DELL, 他可能不理你....
除非你有Server Tag..

http://www.osslab.com.tw/Storage/En...Firmware_Log%29

正在看OSSLAB的文章....
沒SERVER TAG，但是有SERVICE TAG可以嗎?
家裡有兩台 DELL optiplex 980...
小弟可以拿那個TAG CALL DELL嗎?

當然不行.....

喔喔~原來"上傳你的tty log"指的是拿LOG給VXR兄分析瞄一下啊...


目前沒SSD可以拿來混搭了~晚點拆別台電腦的SSD來 SAVE TTY LOG.

拿了一顆別台電腦的SSD接上去，一樣ID重複~
以下是截圖與LOG...
趕緊來去關機...好恐怖!

在SAS Topology Descovery階段所發生的一個異常現象...
T7: iopiEvent: EVENT_SAS_DISCOVERY
T7: DM_HandleDiscEvent: Discovery started on Port 0

T7: MPT_Event: EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE
T7: iopiEvent: EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE
T7: DM_HndlEnclStatusChgEvnt: EnclosureHandle x0001 Reason x01 PhysicalPort 0
T7: ELI 5d4ae52091901f00 NumSlots x0008 StartSlot x001c PhyBits x00000000 IOCLogInfo x00000000 IOCStatus x0000
T7: Ctrl enclosure device added
T7: DM_HandleTopologyChgEvnt: PhysicalPort=0 NumEntries=3 StartPhyNum=4

T8: iopiEvent: EVENT_SAS_DISCOVERY
T8: DM_HandleDiscEvent: Discovery Completed on Port 0


T10: iopiEvent: EVENT_SAS_DISCOVERY
T10: DM_HandleDiscEvent: Discovery started on Port 0
T10: DM_HandleTopologyChgEvnt: PhysicalPort=0 NumEntries=1 StartPhyNum=0
T10: MPT_DeviceAddRemove : ADDED - phy x00 devHandle x0009 parentDevHdl x0001 phyNum x00 slot x1c deviceInfo=x00000881 sasAddr=44332211:0
T10: DM_DeviceInserted: tempdevId[110], DevHandle[9]

T10: iopiEvent: EVENT_SAS_DISCOVERY
T10: DM_HandleDiscEvent: Discovery Completed on Port 0


T10: iopiEvent: EVENT_SAS_DISCOVERY
T10: DM_HandleDiscEvent: Discovery started on Port 1
T10: DM_HandleTopologyChgEvnt: PhysicalPort=0 NumEntries=1 StartPhyNum=7
T10: MPT_DeviceAddRemove : ADDED - phy x07 devHandle x000a parentDevHdl x0002 phyNum x07 slot x1c deviceInfo=x00000881 sasAddr=44332211:7000000
T10: DM_DeviceInserted: tempdevId[111], DevHandle[a]

T10: iopiEvent: EVENT_SAS_DISCOVERY
T10: DM_HandleDiscEvent: Discovery Completed on Port 1


T11: iopiEvent: EVENT_SAS_DISCOVERY
T11: DM_HandleDiscEvent: Discovery started on Port 2
T11: DM_HandleTopologyChgEvnt: PhysicalPort=0 NumEntries=1 StartPhyNum=1
T11: MPT_DeviceAddRemove : ADDED - phy x01 devHandle x000b parentDevHdl x0003 phyNum x01 slot x1d deviceInfo=x00000881 sasAddr=44332211:1000000
T11: DM_DeviceInserted: tempdevId[112], DevHandle[b]

T11: iopiEvent: EVENT_SAS_DISCOVERY
T11: DM_HandleDiscEvent: Discovery Completed on Port 2


T11: iopiEvent: EVENT_SAS_DISCOVERY
T11: DM_HandleDiscEvent: Discovery started on Port 3
T11: DM_HandleTopologyChgEvnt: PhysicalPort=0 NumEntries=1 StartPhyNum=3
T11: MPT_DeviceAddRemove : ADDED - phy x03 devHandle x000c parentDevHdl x0004 phyNum x03 slot x1f deviceInfo=x00000881 sasAddr=44332211:3000000
T11: DM_DeviceInserted: tempdevId[113], DevHandle[c]

T11: iopiEvent: EVENT_SAS_DISCOVERY
T11: DM_HandleDiscEvent: Discovery Completed on Port 3


T11: iopiEvent: EVENT_SAS_DISCOVERY
T11: DM_HandleDiscEvent: Discovery started on Port 4
T11: DM_HandleTopologyChgEvnt: PhysicalPort=0 NumEntries=1 StartPhyNum=2
T11: MPT_DeviceAddRemove : ADDED - phy x02 devHandle x000d parentDevHdl x0005 phyNum x02 slot x1e deviceInfo=x00000881 sasAddr=44332211:2000000
T11: DM_DeviceInserted: tempdevId[114], DevHandle[d]

T11: iopiEvent: EVENT_SAS_DISCOVERY
T11: DM_HandleDiscEvent: Discovery Completed on Port 4

T21: PortEnable success... chip x00 EndTime x00000015 TimeTaken x10

IOC部分的8組PHY對應...
T21: PHY0: Port=0, PortFlags=1, PhyFlags=0, NegRate=aa, CtrlPhyDevInf=71 AttDevHdl=9 CtrlDevHdl=1 DiscSts=0
T21: PHY1: Port=2, PortFlags=1, PhyFlags=0, NegRate=aa, CtrlPhyDevInf=71 AttDevHdl=b CtrlDevHdl=3 DiscSts=0
T21: PHY2: Port=4, PortFlags=1, PhyFlags=0, NegRate=aa, CtrlPhyDevInf=71 AttDevHdl=d CtrlDevHdl=5 DiscSts=0
T21: PHY3: Port=3, PortFlags=1, PhyFlags=0, NegRate=aa, CtrlPhyDevInf=71 AttDevHdl=c CtrlDevHdl=4 DiscSts=0
T21: PHY4: Port=0, PortFlags=1, PhyFlags=0, NegRate=00, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=1 DiscSts=0
T21: PHY5: Port=0, PortFlags=1, PhyFlags=0, NegRate=00, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=1 DiscSts=0
T21: PHY6: Port=0, PortFlags=1, PhyFlags=0, NegRate=00, CtrlPhyDevInf=71 AttDevHdl=0 CtrlDevHdl=1 DiscSts=0
T21: PHY7: Port=1, PortFlags=1, PhyFlags=0, NegRate=aa, CtrlPhyDevInf=71 AttDevHdl=a CtrlDevHdl=2 DiscSts=0

忙了一個禮拜還沒搞定的問題... 想來請教一下有沒有建議的處理方式...

系統環境
Dell H700 + SSD(系統碟) + Raid5 (3x seagate 3TB SAS)
半個月前開始覺得硬碟速度變慢(明顯)
簡單的用 CrystalDiskMark 檢查 1000m Seq 寫入速度只有 30-40 Mb/s
SSD 系統碟速度正常，問題出在 RAID5 的部分 (姑且假設 h700 卡本身沒問題)

為了保險，先花了兩天把資料備份出來..
把firmware 升級到 Firmware Version: 2.100.03-2035
花了一天跑 Initialize .. 結果並沒改善 也沒有任何警示訊息

把 Raid5 拆開.. 一顆一顆檢查速度 發現其中一顆速度明顯特別慢..
不甘心直接換掉...(手上也沒有備用的)
所以姑且又花了一天做完整的磁區檢查.. 然後速度恢復正常了 1xxMb/s
再次把 raid5 做起來 簡單檢查速度好像ok...
昨天中午到今天早上 把 raid5 的 Initialize 再次跑完..
再次檢查速度... ㄜ.. 又掛回 40Mb/s..
再跑去買新硬碟or送修之前，忍不住上來想先尋求幫助...

1.一些檢測硬碟健康狀況的軟體好像對 H700 無用?
找到的軟體只能透過寫入寫出檢查速度以及磁區.. 有沒有可用的軟體?
2.可以拿 SATA 的硬碟替代掉可能有問題的SAS硬碟嗎?

請教一下各位先進，小弟最近不小心買了H710P，目前可由 RAID BIOS 中正確設定 SAS 146GB *3(RAID5) + SATA 3TB*4(RAID5)，沒有 ID 重複的問題。
上週只有裝SATA 3TB*4(RAID5)，當資料碟備份資料也都正常。
這兩天想說把 SAS 146GB *3(RAID5) 加上去當 OS 碟，重灌裝 win7 x64 時，卻出現要放驅動程式的畫面，想請教一下如何正確安裝 Driver？

PS. 安裝 Win7 x64 時，有從 Dell 網站下 Win2008 x64 的 driver 到 USB 隨身碟，安裝時有正確辨識到 H710P，但按下一步時，又出現要我放入驅動程式的畫面，真是鬼打牆 ＠＠