|
||
|
Senior Member
 加入日期: Sep 2002
文章: 1,079
|
引用:
starless兄,你是說治平大哥提供的Philips韌體嗎? 如果是,小弟試過了...也試過你說的Nero版本(現在是用6.3.0.0) 剛剛又拿Ha! CD Burner來燒-R(4x),拿到播放機讀都OK! 對了,順便說一下,我之前用Nero 6.3.0.2來模擬燒錄時 燒到100%時像當機一樣(Nero都沒反應),但機器還是一直閃爍紅燈,後來重開機 都會出現一段訊息(可惜我沒把訊息視窗抓下來),意思是我片子可能有燒過,無法模擬 但片子是新的(試了三片,都出現一樣的訊息),從開機也一樣! 所以後來就換Nero 6.3.0.0~ 上述情況(模擬)在Philips韌體和B3D7上測試都一樣 應該是Nero在作怪... 還是建議800A用Ha! CD Burner或RecordNow來燒DVD... |
||||||||
2004-04-21, 08:21 PM
#111
|
|
|
Elite Member
  加入日期: Apr 2002
文章: 8,545
|
引用:
嗯！目前主力是Ha CD Burner跟Alcohol以及Nero 5.5.10.56，目前還打算死守5.x版，偶不敢拿金錢跟自己開玩笑………  6.x版前科不少，我自己也都有碰過，還是等穩當一點再說∼  |
|||
|
2004-04-22, 09:19 AM
#112
|
|
|
Senior Member
加入日期: Sep 2002
文章: 1,079
|
引用:
嗯!我了解了..謝謝你  http://forum.pcdvd.com.tw/showthrea...10&pagenumber=1 上面的adamchien兄把韌體刷成Philips 4x 用Nero開始燒錄,也出現錯誤訊息! 在Check disc後認為那不是DVD+/- RW or DVD+/-R ??? 結果用酒精燒就ok! http://forum.pcdvd.com.tw/showthrea...10&pagenumber=2 上面是網友對Nero支援-R的解說. |
|
|
2004-04-23, 02:04 AM
#113
|
|
|
Elite Member
加入日期: Apr 2002
文章: 8,545
|
引用:
謝謝您的指出與說明指引囉∼ |
|
|
2004-04-23, 11:39 PM
#114
|
|
|
New Member
加入日期: Sep 2002
文章: 4
|
Benq 4X B3D7韌體 我買來就是這個嘞...
不過燒附的+rw都只能到2.4x 該怎麼辦呢?~ |
|
2004-04-30, 12:22 AM
#115
|
|
|
Elite Member
加入日期: Apr 2002
文章: 8,545
|
引用:
你得把狀況更specific地說明，否則無從幫忙起。 |
|
|
2004-04-30, 07:23 AM
#116
|
|
|
New Member
加入日期: Sep 2002
文章: 4
|
需要那一些東西阿
我是差在ide上的 用的片子是 Benq 800A DVD+RW送的那一片+rw ########################### System Information ########################### Windows 2000 Professional 5.0 Service Pack 4 (Build 2195) Processor info: Intel(R) Pentium(R) 4 CPU 2.00GHz (1999MHz) Memory Available to Windows: 392,688 KB /////////////////////////////////////////////////////////////////////// (F ATAPI DVD DUAL 8X4X12(1:1) detail information./////////////////////////////////////////////////////////////////////// Vendor Identification: ATAPI Product Identification: DVD DUAL 8X4X12 Production Revision Level: B3D7 Location: atapi, Port 1, Bus 0, Target 1, Lun 0 Support recording method: RAW DAO(16), TAO BURN-Free Technology: Not Supported Auto-Select best write speed: Not Supported -* Note: This information below is provided by the unit, it might be inaccurate. *- -* This software does not use this information! *- Removable media: Yes Version: ATAPI (INF-8090i/INF-8020i/INF-8028i) Response Data Format: 02h CD-R Read/Write: Yes/Yes CD-RW Read/Write: Yes/Yes Read CD-R Fixed Packet: Yes Test Write: Yes DVD-ROM Read: Yes DVD-R Read/Write: Yes/Yes DVD-RAM Read/Write: No/No Audio Play: Yes Composite Audio and Video Data Stream: No Digital output (IEC958) on port 1 Supported: Yes Digital output (IEC958) on port 2 Supported: No Mode 1 Form 2: Yes Mode 2 Form 2: Yes Multi-Session: Yes BUF: Yes CD-DA Commands supported: Yes CD-DA Stream is Accurate: Yes R-W Supported: Yes R-W De-interleaved and Corrected: No C2 Pointers Support: No ISRC Supported: Yes UPC Supported: Yes Read Bar Code: No Lock media into the drive: Yes Currently drive Lock state: Unlocked Prevent Jumper: No Eject Command: Yes Separate volume levels: No Separate channel mute: No Changer Supports Disc Present: No Software slot selection: No Side change capable: No P through W in Lead-In: Yes Maximum Read Speed Supported (with current disc): 40X (6000 KB/Sec) Maximum Write Speed Supported (with current Disc): 24X (3600 KB/Sec) Current Read Speed Supported (with current Disc): 40X (6000 KB/Sec) Current Write Speed Supported (with current Disc): 24X (3600 KB/Sec) ####################################################################### |
|
2004-04-30, 03:59 PM
#117
|
|
|
New Member
加入日期: Sep 2002
文章: 4
|
我一買來就試燒+RW 不過只有2.4x ....
不知該怎麼半 |
|
2004-04-30, 04:05 PM
#118
|
|
|
Elite Member
加入日期: Apr 2002
文章: 8,545
|
引用:
有先做成Image嗎？燒錄軟體用的是？ |
|
|
2004-04-30, 10:21 PM
#119
|
|
|
New Member
加入日期: Sep 2002
文章: 4
|
我是用nero6.3
燒了2次~ 一次是把電腦內的檔案燒到dvd (資料) 一次是用neroㄉ測試跑ㄉ |
|
2004-04-30, 11:47 PM
#120
|
|
