|
||
|
Power Member
 
加入日期: Nov 2001 您的住址: Texas
文章: 660
|
為什麼我的卡還是燙到當機ㄋ~~
之前的geforce256因為夏天到了~~狂當機~~所以我就換了我朋友借我的~~華碩的4mb顯示卡~~只要不玩game或看dvd或是看vcd~~就不會差很多~~只有有時開東西的速度比較慢~~剛剛居然又當機了~~我一摸~~哇靠 ~~這次變成是只有晶片燙ㄌ~~之前是geforce256整塊板子燙~~風扇還會燙傷我~~這次是只有晶片燙~~因為以前的4mb用不到風扇ㄅ~~所以只有一個小小的散熱片~~怪ㄌ~~上個月用都好好的~~溫溫的~~今天怎麼會這樣~~是我中klez嗎~~不可能ㄅ~~還是我的板子本身就有問題~~還是4x或2x調錯ㄌ~~我的板子是abit的st6~~用c1.3~~
各位大大~~怎麼辦~~要買新的還是有辦法解決~~我的cpu現在一開機就40度~~且是把電壓降到~~1.15v~~
__________________
When the Nazis came for the communists, I remained silent; I was not a communist. When they locked up the social democrats, I remained silent; I was not a social democrat. When they came for the trade unionists, I did not speak out; I was not a trade unionist. When they came for the Jews, I remained silent; I was not a Jew. When they came for me, there was no one left to speak out. Martin Niemöller (1892-1984) |
|||||||
2002-05-07, 02:00 AM
#1
|
|
|
Major Member
加入日期: Aug 2001 您的住址: 出沒無常
文章: 168
|
先開機殼看看
直覺是散熱有問題 |
||
|
2002-05-07, 02:32 AM
#2
|
|
|
Elite Member
  
加入日期: Jul 2001 您的住址: Red Planet
文章: 4,277
|
我的電腦M/B上的風扇不算,就有8個風扇在散熱,就算夏天也不會當機,機殼散熱這是非常重要的~~
__________________
The war is crates by fear and gap. |
|
2002-05-07, 02:49 AM
#3
|
|
|
Power Member
加入日期: Nov 2001 您的住址: Texas
文章: 660
|
我的機殼沒蓋過~~我的電腦只有cpu的風扇~~我是3大3小的小機殼~~
__________________
When the Nazis came for the communists, I remained silent; I was not a communist. When they locked up the social democrats, I remained silent; I was not a social democrat. When they came for the trade unionists, I did not speak out; I was not a trade unionist. When they came for the Jews, I remained silent; I was not a Jew. When they came for me, there was no one left to speak out. Martin Niemöller (1892-1984) |
|
2002-05-07, 03:09 AM
#4
|
|
|
Elite Member
加入日期: Jul 2001 您的住址: Red Planet
文章: 4,277
|
那就用電風扇吹吧!!
__________________
The war is crates by fear and gap. |
|
2002-05-07, 03:12 AM
#5
|
|
|
Power Member
加入日期: Nov 2001 您的住址: 德州遊樂園
文章: 543
|
貼個大散熱片（以前486CPU的很好用）
再加裝一棵8X8風扇就很夠了
__________________
Keep looking up, cause that's where it all is! |
|
2002-05-07, 03:20 AM
#6
|
|
|
Major Member
加入日期: Jul 2001 您的住址: 碼頭
文章: 224
|
跑3d也會操cpu,cpu不要降壓跑,有時會出問題,試試看~~~
之前我的cpu溫度是65度,後來我找到問題出在那了 就是cpu散熱座的夾子不緊了,調一調弄緊些 再裝上cpu散熱座,溫度馬上降十度全速跑不會超過55度 我想應該之前cpu散熱座一直無法很貼住cpu才會如此情形 cpu沒加壓,電壓設定auto 蓋機殼,我沒裝系統風扇,只有power supply抽風出去,因怕吵 這是我的情形,參考參考
__________________
大膽學 不怕髒 |
|
2002-05-07, 04:42 AM
#7
|
|
|
Major Member
加入日期: Jan 2001 您的住址: taiwan
文章: 239
|
4mb的卡大概沒有2x 4x可調吧?
|
|
2002-05-07, 09:22 AM
#8
|
|
|
Senior Member
加入日期: Jul 2001 您的住址: 台南
文章: 1,342
|
引用:
應該是指 Bios中的AGP Data Transfer Rate.. |
|
|
2002-05-08, 01:13 AM
#9
|
|
|
Junior Member
加入日期: Aug 2001
文章: 700
|
一開機 CPU 就四十幾度？檢查一下扣具有沒有脫落，重新
塗抹上散熱膏看看。順便把風扇、散熱片的灰塵清除一下。 |
|
2002-05-08, 01:34 AM
#10
|
|
