不知道怎麼看的..
可以用Intel給開發人員用的工具...
RAIDCPLY
Click here to download it!!

下指令方式:
raidcply /?

產生報告:
raidcply [/parameter] >filename.txt
例如: raidcply /v >version.txt 去檢查RAID Option ROM版本
Intel(R) RAID Option ROM Integration Test Suite, 10.0.0.1046
Copyright(C) 2003-10 Intel Corporation. All Rights Reserved.

RAID Option ROM Version Information
===================================
Version Table Found: CE04:0000
Version Header Revision: 2.2
ROM Version: 8.9.1.1002
ROM DEVID: 2822
Supported RAID Levels: RAID0 / RAID1 / RAID10 / RAID5 /IRRT
Max Disks per Array: 6
Max Disks Supported: 6
Max Volumes per Array: 2

Supported Strip Sizes:
2k 4k 8k 16k 32k 64k 128k 256k 512k 1M 2M 4M 8M 16M 32M 64M
0 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0

OROM Supported Attributes:
RAID0
RAID1
RAID10
RAID5
IRRT
2TB VOLUMES
CHECKSUM VERIFY

OROM Supported Capabilities:
TURBO MEMORY
HDD PASSWORD
DANBURY TECHNOLOGY

OROM PCIR Header Location:CE00:0090
OROM is PCI Version 3.0
--------------------------------
Pnp Header 1
--------------------------------
(0x06): Next Header 0x0000
(0x08): PortBitMap 0x00
(0x0E): Mfr Str (0x00AC) Intel Corporation
(0x10): Pro Str (0x00BE)
(0x16): BCV 0x0000

MULTI-SEGMENT OROM
ORIGINAL COMPILED FEATURE TABLE HEADER NOT FOUND.

raidcply /m >memsize.txt
Intel(R) RAID Option ROM Integration Test Suite, 10.0.0.1046
Copyright(C) 2003-10 Intel Corporation. All Rights Reserved.

RAID Option ROM Version Information
===================================
Version Table Found: CE04:0000
Version Header Revision: 2.2
ROM Version: 8.9.1.1002
ROM DEVID: 2822
Supported RAID Levels: RAID0 / RAID1 / RAID10 / RAID5 /IRRT
Max Disks per Array: 6
Max Disks Supported: 6
Max Volumes per Array: 2

Supported Strip Sizes:
2k 4k 8k 16k 32k 64k 128k 256k 512k 1M 2M 4M 8M 16M 32M 64M
0 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0

OROM Supported Attributes:
RAID0
RAID1
RAID10
RAID5
IRRT
2TB VOLUMES
CHECKSUM VERIFY

OROM Supported Capabilities:
TURBO MEMORY
HDD PASSWORD
DANBURY TECHNOLOGY

OROM PCIR Header Location:CE00:0090
OROM is PCI Version 3.0
--------------------------------
Pnp Header 1
--------------------------------
(0x06): Next Header 0x0000
(0x08): PortBitMap 0x00
(0x0E): Mfr Str (0x00AC) Intel Corporation
(0x10): Pro Str (0x00BE)
(0x16): BCV 0x0000

MULTI-SEGMENT OROM
ORIGINAL COMPILED FEATURE TABLE HEADER NOT FOUND.


Conventional memory available: 593kB

raidcply /t >test.txt
1. Intel(R) SATA RAID Controller Presence Tests
1.1 Intel(R) Chipset Detected....................................PASS
1.2 RAID Controller DevID at D31:F2..............................PASS
1.3 RAID Controller Name.......................ICH8R or later(no LPC)
1.4 RAID SubClass Code (0x04) at D31:F2..........................PASS
1.5 Chipset Revision............................................Rev 0
1.6 AIE Bit is CLEAR(0) at Dev31 Funct2..........................PASS
1.7 Raid Platform ID..............................................N/A

2. PnP Installation Tests
2.1 $PnP Anchor String Present in 0xF000 Segment.................PASS
2.2 PnP Header Checksum Valid....................................PASS

3. BBS Enabled BIOS Tests
3.1 PCI BIOS Present (INT 1A, Func 0xB101).......................PASS
3.2 PCI BIOS Version..............................................N/A
3.3 PCI BIOS Version Supports OROM PCI Version...................PASS

4. AHCI Register Settings Tests
4.1 HBA Port Multiplier Support Status.......................DISABLED
4.3 HBA Supports Command List Override...........................PASS
4.4 HBA Supports Interlock Switch............................DISABLED
4.5 HBA Capabilities Register Locked.............................PASS
4.6 AHCI Enable Bit Status....................................ENABLED

4.7 Port Implemented Bit Set for Port 0.......................ENABLED
4.8 PI Bit Matches PE Bit for Port 0.............................PASS
4.9 Aggressive Link Power Management on Port 0...............DISABLED
4.10 Hot Plug Support on Port 0..............................DISABLED
4.11 Interlock Switch Attached to Port 0..........................N/A
4.12 ALPE and HPCP Cannot Both be Set on Port 0..................PASS
4.13 ISP Requires HPCP on Port 0.................................PASS
4.14 Port 0 Command Register Locked..............................PASS
4.15 External Port Bit Set for Port 0.........................ENABLED

4.7 Port Implemented Bit Set for Port 1.......................ENABLED
4.8 PI Bit Matches PE Bit for Port 1.............................PASS
4.9 Aggressive Link Power Management on Port 1...............DISABLED
4.10 Hot Plug Support on Port 1..............................DISABLED
4.11 Interlock Switch Attached to Port 1..........................N/A
4.12 ALPE and HPCP Cannot Both be Set on Port 1..................PASS
4.13 ISP Requires HPCP on Port 1.................................PASS
4.14 Port 1 Command Register Locked..............................PASS
4.15 External Port Bit Set for Port 1.........................ENABLED

4.7 Port Implemented Bit Set for Port 2.......................ENABLED
4.8 PI Bit Matches PE Bit for Port 2.............................PASS
4.9 Aggressive Link Power Management on Port 2...............DISABLED
4.10 Hot Plug Support on Port 2..............................DISABLED
4.11 Interlock Switch Attached to Port 2..........................N/A
4.12 ALPE and HPCP Cannot Both be Set on Port 2..................PASS
4.13 ISP Requires HPCP on Port 2.................................PASS
4.14 Port 2 Command Register Locked..............................PASS
4.15 External Port Bit Set for Port 2.........................ENABLED

4.7 Port Implemented Bit Set for Port 3.......................ENABLED
4.8 PI Bit Matches PE Bit for Port 3.............................PASS
4.9 Aggressive Link Power Management on Port 3...............DISABLED
4.10 Hot Plug Support on Port 3..............................DISABLED
4.11 Interlock Switch Attached to Port 3..........................N/A
4.12 ALPE and HPCP Cannot Both be Set on Port 3..................PASS
4.13 ISP Requires HPCP on Port 3.................................PASS
4.14 Port 3 Command Register Locked..............................PASS
4.15 External Port Bit Set for Port 3.........................ENABLED

4.7 Port Implemented Bit Set for Port 4.......................ENABLED
4.8 PI Bit Matches PE Bit for Port 4.............................PASS
4.9 Aggressive Link Power Management on Port 4...............DISABLED
4.10 Hot Plug Support on Port 4..............................DISABLED
4.11 Interlock Switch Attached to Port 4..........................N/A
4.12 ALPE and HPCP Cannot Both be Set on Port 4..................PASS
4.13 ISP Requires HPCP on Port 4.................................PASS
4.14 Port 4 Command Register Locked..............................PASS
4.15 External Port Bit Set for Port 4.........................ENABLED

4.7 Port Implemented Bit Set for Port 5.......................ENABLED
4.8 PI Bit Matches PE Bit for Port 5.............................PASS
4.9 Aggressive Link Power Management on Port 5...............DISABLED
4.10 Hot Plug Support on Port 5..............................DISABLED
4.11 Interlock Switch Attached to Port 5..........................N/A
4.12 ALPE and HPCP Cannot Both be Set on Port 5..................PASS
4.13 ISP Requires HPCP on Port 5.................................PASS
4.14 Port 5 Command Register Locked..............................PASS
4.15 External Port Bit Set for Port 5.........................ENABLED

4.16 CAP.SIS and PxCMD.ISP Agreement.............................PASS
4.17 Software Feature Mask Bit...............................DISABLED

5. Chipset RAID Controller Settings Tests
5.1 RAID I/O Space Enabled.......................................PASS
5.2 RAID Memory Space Enabled....................................PASS
5.3 RAID Programming Interface Set to 0..........................PASS
5.4 RAID Programming Interface Locked............................PASS
5.5 Primary Command BAR Programmed...............................PASS
5.6 Primary Control BAR Programmed...............................PASS
5.7 Secondary Command BAR Programmed.............................PASS
5.8 Seconday Control BAR Programmed..............................PASS
5.9 Legacy Bus Master BAR Programmed.............................PASS
5.10 AHCI BAR Programmed.........................................PASS
5.11 MAP Bits Set to Non-Combined (00b)..........................PASS
5.12 SATA Mode Select Set to RAID (10b)..........................PASS

5.13 Port 0 Enable Bit Set....................................ENABLED
5.14 SATA Device Present on Port 0..............................ATAPI

5.13 Port 1 Enable Bit Set....................................ENABLED
5.14 SATA Device Present on Port 1...............................NONE

5.13 Port 2 Enable Bit Set....................................ENABLED
5.14 SATA Device Present on Port 2...............................NONE

5.13 Port 3 Enable Bit Set....................................ENABLED
5.14 SATA Device Present on Port 3...............................NONE

5.13 Port 4 Enable Bit Set....................................ENABLED
5.14 SATA Device Present on Port 4...............................NONE

5.13 Port 5 Enable Bit Set....................................ENABLED
5.14 SATA Device Present on Port 5...............................NONE

5.15 At least 2 SATA HDDs found..................................FAIL
5.17 Primary IO Decode Enabled....................................N/A
5.18 Secondary IO Decode Enabled..................................N/A
5.19 Primary Timing Register Programmed...........................N/A
5.20 Secondary Timing Register Programmed.........................N/A

6. Intel(R) RAID Option ROM Tests
6.1 Option ROM Found in BIOS Compatibility Segments..............PASS
6.2 Option ROM Build Matches Chipset.............................PASS
6.3 Option ROM Checksum Valid....................................PASS
6.4 Main Memory Size < 639kB.....................................PASS
6.5 Option ROM Caching........................................ENABLED

7. System BIOS Tests
7.1 BIOS Does Not Export HDD's on RAID Controller.................N/A
7.2 BIOS Updating INT 15h E820 Memory Map........................PASS
7.3 BIOS Reporting Correct Base Memory Size in 40:13.............PASS

8. Interrupt Settings Tests
8.1 RAID Controller IRQ............................................15
8.2 Clear Spurious Interrupts on RAID Controller..................N/A
8.3 Performance Enhancement Semaphore at 40:8E...............DISABLED

9. NVM Register Settings Tests
9.1 NVMHCI capability in CAP2 register.......................DISABLED
9.2 NVMHCI Version................................................N/A
9.3 NVMHCI Ports Implemented......................................N/A
9.4 NVMHCI Port Signature.........................................N/A
9.5 NVM Present on Port...........................................N/A

Total Test(s): 54; PASS: 53 FAIL: 1

那個Conventional memory available: 593kB
也許是可用的System memory拿來做Buffer的大小...
猜的

就可以得知新增的幾個部分包括:
- Optical Disk Drive (ODD) Video Read-ahead (VRA) - REMOVED later due to problems with certain BluRay protections
- Zero Power ODD – Power-off Unused Optical Disk Drives (ODD)
- Email Alert and Notification
- RAID Volume Cache Size Increased to 16 MB of System Memory<<==加蠻大的
- SATA Link Power Management (LPM) Support on Desktop

http://bbs.bios.net.cn/thread-132282-1-1.html

這兒有教人怎麼更新

raidcply是16位元程式？
無法在X64的命令提示字元下操作................

我也想更新看看
卻沒有相關的ROM的資料
這個在技術上的困難度也是比較大的

請在dos操作..

重點是 你的主機板型號,跟INTEL晶片組是什麼?

AMI的非常好處理

Adware的就比較麻煩了,還要挖出dos來用