![]() |
||
Master Member
![]() ![]() ![]() ![]() 加入日期: Apr 2004
文章: 1,768
|
Catalyst 10.1 HotFix 出了,解決HD5000系列破圖的問題!!
AMD表示,在正常使用Radeon HD 5800系列顯卡的時候,螢幕可能會間歇性變灰,或者出現垂直線條,安裝Catalyst 10.1 HoxFix驅動即可修正,Windows XP/Vista/7全部支援。
下載 http://support.amd.com/us/kbarticle...orruptions.aspx |
|||||||
![]() |
![]() |
Major Member
![]() 加入日期: Jun 2009
文章: 167
|
引用:
5700系列有一起解決嗎? |
|||
![]() |
![]() |
Master Member
![]() ![]() ![]() ![]() 加入日期: Apr 2004
文章: 1,768
|
引用:
不知~ AMD官網原文只有提到5800 ========================================================== Applicable Products: This issue applies to the following configuration(s): ■Hardware ◦ATI Radeon™ HD 5800 Series ■Software ◦ATI Catalyst™ release ■Operating System ◦Windows 7® 32bit ◦Windows 7® 64bit ◦Windows Vista® 32 bit ◦Windows Vista® 64 bit ◦Windows® XP ◦Windows® XP x64 ◦Windows® XP Media Center ========================================================== |
|
![]() |
![]() |
Power Member
![]() ![]() 加入日期: Dec 2005
文章: 631
|
引用:
其實我的MSI 5770公版沒碰過這個問題 我也很懷疑是不是只有5800系列的會而已 |
|
![]() |
![]() |
Major Member
![]() 加入日期: Aug 2005 您的住址: 歡迎加入THK
文章: 161
|
提供一些方向, 無效無責...
爬一些文,
1. 增加主機板記憶體電壓 2. 增加PCI-E電壓 3. 增加顯示卡的電壓 4. 驅動程式使用8.70 RC2 (或者避開使用8.69.xxx的驅動) 5. 編輯xml, 提高2D時脈為400/900 6. 安裝本文的catalyst 10.1 hotfix 不穩的人, 自己選其中一個來試試吧...= =" (先試試4. 5. 6. 比較安全...) --- 也有一說是GDDR5記憶體過熱導致的...
__________________
罰金100萬元。 科技不敵人性。 此文章於 2010-02-06 12:47 PM 被 誰找我 編輯. |
![]() |
![]() |
Junior Member
![]() ![]() ![]() 加入日期: Dec 2006
文章: 908
|
這版 HotFix 我給零分...因為滑鼠變大的蟲還是存在...
![]() |
![]() |
![]() |
Power Member
![]() ![]() 加入日期: Jul 2005
文章: 517
|
引用:
是甚麼鼠標變大? 看了那麼多次都還沒見過滑鼠變大的圖片。 此文章於 2010-02-06 07:50 PM 被 JACD 編輯. |
|
![]() |
![]() |
Major Member
![]() 加入日期: Jan 2003 您的住址: 新竹
文章: 239
|
引用:
不...我的技嘉 5770 公版,也有這個問題,不過不是所有的GAME都會這樣 目前只有玩MHFO會不定時當掉,其他的都不會,不玩GAME也沒事 等等DOWNLOAD完,再來裝看看好了 |
|
![]() |
![]() |
Golden Member
![]() ![]() ![]() ![]() 加入日期: Dec 2002
文章: 3,258
|
標題用”解決”兩字可能較不恰當,
有人用此hotfix後,問題依舊, 也有人似乎解決了一些問題, 官方用alleviates我就覺得不對頭了, 一般是用solve,顯示amd對此driver沒有信心, 若以bios upgrade為備案,問題會較為複雜, 有人說就算不掛任何驅動程式,還是會出現條紋, 那就可能是硬體或bios問題了, 排除硬體問題,bios原始設定讓部分58處於不穩定狀態, 節錄討論區,sapphire似乎也釋出一些beta版本bios For me this is a NOT a software issue. It exists even when no ATI drivers are installed on different OS (even non-Windows). So there are only two other options left 1. Hardware defect in some cards 2. Firmware defect into the ATI BIOS rendering some cards defective (due to different components used by card makers - Sapphire, HIS, XFX...) If it is a hardware defect it is obvious that the only way to be fixed is by RMA. The fact that Sapphire started to release a lot of beta BIOS (from support tickets) make me think that we should not expect a software fix here. All the ATI do now is buying some more time to fix the problem with an official BIOS (distributed by different manufactures). If you are not familiar with the BIOS release procedure here it is: ATI release a new BIOS and give it to the manufactures. They "modify" it for the different cards they make (memory timings in general) and then the BIOS is "signed" by ATI (after testing it). Then this signed BIOS is released by manufactures. The issues will be fixed (if it is possible) before the release of Fermi (or ATI goes to hell) with a firmware update (maybe the update will not be on official manufactures site but with support ticket) I expect that all cards manufactured after the middle of February will contain a new BIOS (BIOS version 19 or 20). The reason for all this is that all HD 5xxx BIOS versions available from Sapphire from support are version 19 (just check the http://www1.sapphiretech.com/global/lib_files/116.zip - you can changed the 116.zip to 117.zip, 118.zip , 119.zip, 120.zip) and use the RBE 1.23 to load this BIOS. You will see that different models 5770, 5750, 5870, 5850... are all with BIOS v.19 All those BIOS-es are only for Sapphire cards. I do not recommend using it. Just point to them to explain why i consider this as firmware defect and that it will be fixed only by BIOS update. |
![]() |
![]() |
Master Member
![]() ![]() ![]() ![]() 加入日期: May 2000
文章: 2,444
|
引用:
各個階段的時脈、電壓本來就是寫在bios中, 但是軟體也是可以某種程度的改變電壓、時脈, 像用afterburner不就可以改變時脈跟電壓(前提是卡上面的某些控制元件要有支援) 畢竟更新驅動人人都會,更新bios可能有些手殘跟衰一點的人還是會刷到掛, 可能先用驅動來解問題,58系列應該都是公版卡,所以還比較好解決, 卡上面用的料都一樣,如果是非公版卡要靠驅動來解決可能就很頭大了 |
|
![]() |
![]() |