PCDVD數位科技討論區
PCDVD數位科技討論區   註冊 常見問題 標記討論區為已讀

回到   PCDVD數位科技討論區 > 電腦硬體討論群組 > 系統組件
帳戶
密碼
 

  回應
 
主題工具
i75birth
Basic Member
 

加入日期: Mar 2006
文章: 25
我硬碟的最後希望"低階格式化"

我家80G maxtor 硬碟在一次無預警重開機後掛了

時而抓不到硬碟時而抓到了可是出現籃底白字又時而正常

光碟開機多次每次抓到的容量都不一樣

後來成功格式化重灌,重灌完後依舊是籃底白字

試過多種方法可以確定的是硬碟問題

可是我用fsdisk 測試沒有壞軌

現在我想得到的唯一方法就是低階格式化

可是沒用過 我不會

不知道板上是否有大大可以教我


以下是籃底白字畫面內容

a problem has been detected and windows has been shut
down to prevent damage to your computer.
PAGE_FAULT_IN_NONPAGED_AREA
If this is the first time you' ve seen this stop error screen,
restart your computer. If this screen appears again,follow
these steps:
Check to make sure any new hardware or soft ware is properly installed.
If this is a new installation,ask your hard ware or soft ware manufacturer
for any windows updates you might need.
If problems continue,disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching.
If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup options, and then select safe mode.

^*^&*$#(一小行亂碼):
&*$@^ stop:0x00000050(0xfffffe8,0x00000001,0x80809706,0x00000000)
     
      
舊 2006-05-06, 12:40 AM #1
回應時引用此文章
i75birth離線中  
t235930
Major Member
 

加入日期: Feb 2003
文章: 111
he PowerMax utility is designed to perform diagnostic read/write verifications on Maxtor and Quantum hard drives.

These tests will determine hard drive integrity. The PowerMax utility is effective on all ATA (IDE) hard drives with a capacity greater than or equal to 500 MB. Maxtor recommends the use of this utility for troubleshooting potential hard drive problems. These problems include, but are not limited to the following:

* Potential hard drive surface problems (e.g., bad clusters, bad sectors, partitioning/formatting problems, etc.).
* Drive recognition problems (e.g. hard drive that is not recognized by the operating system).
* Software removal.


http://www.maxtor.com/portal/site/M...s&downloadID=22

http://www.maxtor.com/_files/maxtor...ax_guide_en.pdf
 
舊 2006-05-06, 01:00 AM #2
回應時引用此文章
t235930離線中  
i75birth
Basic Member
 

加入日期: Mar 2006
文章: 25
我看不懂英文
有人能幫我翻譯嗎
舊 2006-05-06, 01:08 AM #3
回應時引用此文章
i75birth離線中  
lee8766
Advance Member
 

加入日期: May 2001
您的住址: Empire
文章: 452
雖然不想說.但是就算修好了.你還敢放東西進去嗎==
舊 2006-05-06, 01:32 AM #4
回應時引用此文章
lee8766離線中  
lawson7212a
*停權中*
 

加入日期: Mar 2006
文章: 168
放磁片進去

查一下單字
舊 2006-05-06, 01:46 AM #5
回應時引用此文章
lawson7212a離線中  
misa
Golden Member
 

加入日期: Dec 2004
文章: 2,636
會不會是硬碟上的電路板快掛了??
舊 2006-05-06, 01:57 AM #6
回應時引用此文章
misa離線中  
John Wel
*停權中*
 
John Wel的大頭照
 

加入日期: Mar 2003
您的住址: 樹林家樂福對面
文章: 1,652
換條排線試試
舊 2006-05-06, 12:30 PM #7
回應時引用此文章
John Wel離線中  
i75birth
Basic Member
 

加入日期: Mar 2006
文章: 25
引用:
作者John Wel
換條排線試試

試過了試過了試過了
舊 2006-05-06, 01:38 PM #8
回應時引用此文章
i75birth離線中  
top123
*停權中*
 

加入日期: Jul 2001
文章: 26
重新分割再格式化,分割的大小不要跟以前一樣,
如果不行才試低階格式化,要有心裡準備,
時間要很久而且有可能愈弄
愈嚴重...
舊 2006-05-06, 05:38 PM #9
回應時引用此文章
top123離線中  
島田莊司
Basic Member
 

加入日期: Oct 2005
文章: 21
低階格式化確實要很久,不過也因此求回小弟的一顆IBM 15G硬碟,現在還在使用中^^
舊 2006-05-06, 06:25 PM #10
回應時引用此文章
島田莊司離線中  


    回應


POPIN
主題工具

發表文章規則
不可以發起新主題
不可以回應主題
不可以上傳附加檔案
不可以編輯您的文章

vB 代碼打開
[IMG]代碼打開
HTML代碼關閉



所有的時間均為GMT +8。 現在的時間是01:20 PM.


vBulletin Version 3.0.1
powered_by_vbulletin 2025。