[非官方]ATI Catalyst v5.8 Driver For Win2K/XP/XP MCE

		PCDVD數位科技討論區 > 電腦硬體討論群組 > 顯示卡討論區
[非官方]ATI Catalyst v5.8 Driver For Win2K/XP/XP MCE

主題工具

sxs112.tw

Elite Member

加入日期: Aug 2001

文章: 12,393

[非官方]ATI Catalyst v5.8 Driver For Win2K/XP/XP MCE

引用:

- Battlefield 2: Geometry corruption or missing textures are no longer noticed when playing the game for an extended period of time under Windows XP with an ATI Radeon® X800 XT installed
- 3D Mark03: Enabling Powerplay mode and running the 3DMark03 or 05 in a loop no longer results in an error message being displayed
- Area51_2.3dc: Playing the game under Windows XP no longer results in the NPC and guns appearing distorted, flashing or missing. Further the polygons no longer pop in and out of the display
- GTA: Vice City: Setting the desktop and the game display option to 1024x768 32bpp and attempting to play the game under Windows XP MCE, no longer results in an Invalid Pixel Format message being displayed after approximately 5 minutes of game play
- Lineage 2: Playing the game under Windows XP no longer results in display corruption being noticed
- Movie Maker 2: Connecting an external video source using the S-video composite connectors, no longer results in the Movie Maker 2 application intermittently failing to capture video, when selecting the Capture from Video Source
- MU Online: Opening a chat window and playing the on-line game no longer results in hesitation being noticed when pressing the Enter key
- Quake 3: Enabling SmartShader™ followed by attempting to do a mode change while playing the game, no longer results in the game failing to respond
- Star Wars Knights of the Old Republic: Running the Dantoonie level of the game no longer result in hesitation being noticed
- Terathon: Starting the Terathon 3D engine and selecting a single player demo, no longer results in the 3D engine failing to respond under Windows XP
- Trackmania Sunrise: Playing the game under Windows XP no longer results in the operating system failing to respond, when attempting to exit the game after leaving the PC idle for an extended period of time
- Warcraft III: Playing the game under Windows XP with the display rotated by 90 degrees CCW, no longer results in display corruption being noticed
Performing an overwrite of the video driver install, no longer results in the Hydravision Multidesk feature being unable to load
- Video mode and Overscan can now be enabled when connecting a TV as the secondary display device and setting the display resolution to 640x480 32bpp 60Hz and extending the desktop
- The Select by Signal Format is now the default setting when connecting a TV to an ATI display adapter
- Catalyst™ Control Center: Updates to saved profiles is now available
- Catalyst™ Control Center: Connecting a TV using the S-Video connector no longer results in the Apply button found in the TV properties of the Catalyst Control Center being active when no changes are made to the TV properties
- Catalyst™ Control Center: An intermittent service error message is no longer displayed when starting up the Windows XP MCE operating system
- Connecting a TV as the secondary display device and a CRT as the primary display device, no longer results in the Video mode and Overscan option not functioning properly when extended desktop is enabled
- Catalyst™ Control Center: Double clicking anywhere on the Catalyst™ Control Center background after changing the color correction to the Full Screen 3D option no longer results in a full screen preview
- Hesitation is no longer noticed when attempting to resume from an S3 or S4 state with Analog tv
- Random display corruption is no longer noticed when playing a raw audio/video capture for the first time
- Configuring Windows Media Encoder 9 as ATI AVStream Analog capture and ATI AVStream Analog Audio capture, followed by selecting a TV channel as input, no longer results in the both the Input and Output windows going black when Start Encoding is clicked
- The DVB-T channel scan time no longer appears to be slow
- Catalyst™ Control Center: Graphic truncation is no longer noticed under the Desktop and Display Setup of the Display Manager, in the German edition of the Catalyst Control Center
- Catalyst™ Control Center: The text found in the Overlay/VIDEOVISION section of the Catalyst™ Control Center is no longer cut-off for the Turkish edition of the Catalyst™ Control Center
- Setting the desktop resolution to 1024x768 32bpp and using the DVI connector to hot-plug an HDMI display device, no longer results in an error message being displayed
Using the ATI recommended speed option found in the Overdrive™ tab of the Catalyst™ Control Center, no longer results in the engine and memory clock values being the same as the default values
- Using the DVI connector for a DFP display device, and the S-Video connector for a TV, no longer results in the driver returning the wrong display mappings when unplugging the DFP display device and extended desktop is enabled
- Catalyst™ Control Center: The Set Desktop Area To, is no longer enabled and the resolution list is no longer available, when hot-unplugging a secondary display device under Windows XP
- Playing an MPEG file on a secondary display device that is connected to the DVI port, no longer results in the lower portion of the playback window being missing
Hesitation in the Aquarium screen saver is no longer noticed when the ATI Multimedia Center™ is running
- Using a limited account under Windows XP and changing the SmartShader™ aspect from none to black and white, no longer results in a general protection fault
- Creating a custom hot-key for rotation no longer results in the custom hot-key to become unavailable for the secondary display device, when extended desktop is enabled and both display devices are set to 1280x1024

ATI Catalyst v5.8 Driver For Win2K/XP/XP MCE

2005-08-17, 08:25 AM #1

ss9785

Elite Member

加入日期: Jan 2002

您的住址: 高雄~高雄站到了

文章: 5,486

非官方.....
怕怕的說..........

上次官方5.7問題就一堆........

看來官方5.8也差不多了吧

__________________
G心叵測步步G心是何G心 G情四射
日本各地實況攝影機影像收集站

2005-08-17, 08:38 AM #2

sxs112.tw

Elite Member

加入日期: Aug 2001

文章: 12,393

目前只有CCC版本....沒有舊的控制台版本

Radeon® display driver 8.152
Multimedia Center™ 9.08
HydraVision™ 3.25.0006
HydraVision™ Basic Edition 3.25.9006
Remote Wonder 3.02
WDM Driver Install Bundle
Southbridge/IXP Driver
Catalyst™ Control Center Version 5.8

催化劑5.8驅動程式支援以下ATi晶片：

Radeon® X850 series
Radeon® X800 series
Radeon® X700 series
Radeon® X600 series
Radeon® X300 series
Radeon® 9X00 series
Radeon® 8500 series
Radeon® 7X00 series

催化劑5.8驅動程式開始支援COPP(Certified Output Protection Protocol)， COPP (Certified Output Protection Protocol) 被Windows XP SP2和Windows MCE2005支援， COPP (Certified Output Protection Protocol) 可以讓用戶在所選擇的數位和類比顯示器上觀看高清晰度類比和數位內容（在未來發佈）。催化劑5.8解決了X800XT在戰場2當中的幾何和紋理缺失的問題。

2005-08-17, 08:42 AM #3

starocean 停權中加入日期: Apr 2004 您的住址: 台北永和文章: 2,406	原來是非官方的我就在想是不是官方網頁更新太慢啥的
2005-08-17, 08:44 AM #4

sxs112.tw

Elite Member

加入日期: Aug 2001

文章: 12,393

引用:

作者starocean

原來是非官方的
我就在想是不是官方網頁更新太慢啥的

除了不是官方先釋出以外...和官方的沒啥差別

2005-08-17, 08:58 AM #5

Kis2080 停權中加入日期: Apr 2005 文章: 709	官方5.7 BF2 我家竟然會破圖..........怕怕了說 -_- 此文章於 2005-08-17 09:16 AM 被 Kis2080 編輯.
2005-08-17, 08:59 AM #6

knift Master Member 加入日期: May 2000 文章: 2,444	觀望一下好了～畢竟5.7真的是蠻失敗的…
2005-08-17, 01:27 PM #7

牛螞蝗 Senior Member 加入日期: Jan 2005 您的住址: 台北滴郊區文章: 1,124	我家X700Pro搭5.7沒有問題. 或許5.7和X系列以前的卡不合=.= __________________ 窗外忽地放晴，回神卻已滂沱，彷彿誰心中那百轉千迴？
2005-08-17, 01:42 PM #8

« 上一主題 | 下一主題 »

POPIN

主題工具
顯示可列印版本傳送本頁給好友

發表文章規則
您不可以發起新主題您不可以回應主題您不可以上傳附加檔案您不可以編輯您的文章 vB 代碼打開表情圖示打開 [IMG]代碼打開 HTML代碼關閉

所有的時間均為GMT +8。現在的時間是02:19 AM.

vBulletin Version 3.0.1
powered_by_vbulletin 2025。