![]() |
||
|
New Member
加入日期: Oct 2001
文章: 6
|
幫我看看我的青雲 5900PV 是出了什麼問題!
只要我玩天堂2或獵殺潛航3時,過沒多久就會當掉(出現下面英文訊息)
而且重開機後就沒任何的畫面,必須到安全模式下把顯示卡的驅動程式重新安裝 而且必須灌較新或較舊版本的驅動程式,如果還是灌相同版本,還是無法正常開機 主機板的驅動程式、BIOS都更新了!電腦也重灌了,還是會發生這個問題! 有沒有人知道問題出在哪呢? 顯示卡平常溫度: GPU核心溫度:45 環繞溫度:38 顯示卡玩遊戲時溫度: GPU核心溫度:53 環繞溫度:42 CPU:Intel Pentium 4 2.60 GHz RAM:Kingston 512 DDR 400 主機板:MSI 865PE NEO 2 顯示卡:青雲 FX5900PV http://taiwan.albatron.com.tw/page/...n.asp?pro_id=67 POWER:HEC 335W HDD:SEAGATE 120GB SATA 燒錄機:Pioneer A09 光碟機:Liteonit 16X check to make sure any new hardware or software is propely installed. If this is a new istallation, ask your hardware or software manufacturer for any windows updates you might need. Run the driver verifier against any new (or suspect) drivers. If that doesn't reveal the corrupting driver, try enabling special pool. Both of these features are intended to catch the corruption at an earlier point where the offending driver can be identified. If you need to use safe Mode to remove or disable components, restart your computer, press F8 to select Advancend Startup Options, and then select safe Mode. If this is the first time you've seen this stop error screen, pestart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. If problems continue, disable or remove any newly installed hardware of software. Disable BIOS memory option such as caching or shadowing. If you need to use sate Mode to remove or disale components, restart your computer, press F8 to select Advanced Startup Options, and the select safe Mode. |
|||||||
|
|
|
Power Member
![]() ![]() 加入日期: Oct 2000
文章: 675
|
青雲的顯示卡常常有不相容的問題...小弟幫人裝機,基於成本考量出了青雲的5900XT,5700,5700LE和6600GT,在不同的主機板和不同的遊戲下都有不相容的情形發生,換了別的廠牌的顯示卡就解決了,當初真的是測了蠻久的,本來以為是驅動程式...等等的問題,後來換了顯示卡以後就一點問題都沒了
|
||
|
|