我的8RDA3+想要更新BIOS
我從美國的磐英網站下載了新版7/29/2004的BIOS
裡面好像說
新版更新可以於關機時關閉USB電源的選項
另外也新增支援散布龍CPU
十分吸引人

我依照上面的指示操作

The ALT+F2 Method

1. Download the required BIOS image file from the EPoX website.

2. Copy or extract the BIOS image file (named xxxxxxxx.bin) to a blank
floppy disk with no bad sectors on it.

3. Restart the machine with the floppy disk in the floppy drive
When prompted at machine initialization, press ALT+F2 to begin
performing the flashing of the BIOS.

4. The BIOS will automatically flash and reboot the machine.

5. After this, press DEL to enter the BIOS setup and select to "LOAD
OPTIMIZED DEFAULTS". After doing this select to "SAVE & EXIT."

6. Please note that this does not create a backup of the BIOS binary file.

7. This does not require you to have a bootable floppy disk.

根據我的破破英文翻譯
應該是說
1.從盤英網站下載BISO影像檔
2.複製BIOS影像檔蹈一個沒有防寫的磁片
3.重開機並把磁片放入,當電腦剛開機時,按下ALT+F2啟動更新BIOS程式
4.BIOS會自動更新並重新開機
5.重開後,按DEL進入BISO設定,選擇LOAD OPTIMIZED DEFAULTS,然後SAVE & EXIT

基本上這樣操作應該沒有錯
可是我依照這樣操作
也顯示讀取新BIOS的畫面
但是依照操作完後
Everest檢測 還是舊版BIOS
請問大家我這樣操作哪裡錯了
可以請大家教教我嗎