去年底花了兩千九買的DW400A
初期燒 CyQ've的片 看DVD讀取曲線
6x開始職銜到12x (用ASUS E616 16X)
後來 改用Ritek版面 差不多
有一次買了半桶ARITA 燒�***數將近十片
改用Ritek X系列黃色片 還不錯
看DVD讀取曲線 6x抖上14x, 末段還會掉到10X一下
不是很滿意 所以昨天買了10片 V-STAR $240
怎麼 連三片失敗

午 10:48:13 #19 Text 0 File DVDPlusRW.cpp, Line 613
Start write address at LBA 0
DVD high compatibility mode: Yes

下午 10:48:30 #20 SCSI -1039 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02DF0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x01
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x09 0x01

下午 10:48:30 #21 CDR -1039 File Writer.cpp, Line 304
Focus or tracking error

下午 10:48:30 #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

下午 10:48:30 #23 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

下午 10:48:30 #24 SCSI -1176 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x72 0x03

下午 10:48:30 #25 Phase 127 File dlgbrnst.cpp, Line 1845
Generating DVD high compatibility borders

下午 10:48:30 #26 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

下午 10:48:30 #27 CDR -1176 File WriterStatus.cpp, Line 164
Session fixation error

下午 10:48:30 #28 TRANSFER -24 File WriterStatus.cpp, Line 164
Could not perform end of Disc-at-once

下午 10:48:30 #29 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

下午 10:48:30 #30 Phase 38 File dlgbrnst.cpp, Line 1845
Burn process failed at 4x (5,540 KB/s)

有人知道怎麼回事?
還是我的DW400A 挑嘴了 只吃RITEK X?