![]() |
||
Senior Member
![]() ![]() ![]() 加入日期: May 2001 您的住址: 數碼天堂
文章: 1,460
|
[轉貼]ATI Radeon目前摧化劑問題與解決方式!
BF1942 Triangles of Death™ II the revenge: users having screen corruption when going into the game menu and then back to the game, only a problem with 3.8 drivers
http://www.rage3d.com/board/showthr...readid=33715791 Affects: a few People 9500+ cards mostly Win2k users Workaround for problem: Use 3.7 drivers or set the screen res to 800 x 600 32bit colour Status: will be fixed in a later driver, reported I am NOT able to reproduce this one despite extensive testing, broken in 3.8 drivers and still broken in 3.9 drivers FPS Slowdown with Counterstrike and also Day of defeat and any other HL based mods Affects: Quite a few people, but not everyone Workaround for problem: a few people have found that using XP sp1 and PowerStrip and enabling Sideband Addressing have solved the issue Status ?in progress? game is just as bad on 1.6 beta, still broken in 3.9's Slow performance with Neverwinter Nights both with and without shadows http://www.rage3d.com/board/showthr...9&highlight=nwn Affects: Everyone Workaround for problem: turn off shadows and AA / AF Status: some good speedup progress has been made with 1.32 game patch, but issues remain (flashing squares, shadow clipping when using a light source) Shiney water problem with Neverwinter Nights http://www.rage3d.com/board/showthr...readid=33695191 Affects: Everyone Workaround for problem: None Status ?ATI are investigating it but DO see it, has been reported, still broken in 3.9's, shiney water also broken on NV5600 so more likely a bioware problem to fix 9600 users cannot run Neverwinter Nights for more than few mins without it crashing http://nwn.bioware.com/forums/viewt...5&forum=49&sp=0 Affects: Most people with a 9600 1 with 9000 Workaround for problem: Turn off hardware mouse and it wont crash in the 3.6 drivers Status: ATI have reproduced the error and are working on a fix, has been reported, crashes with 3.1 - 3.9, reported to bioware and atari too, Will be fixed in a future driver update X-Wing vs. Tie Fighter, Jane's F/A-18, Flanker 2.5, Mechwarrior 3, Star Wars Racer, virtual pool3 AA, Escape from Monkey Island not enabled Affects: Everyone? Workaround for problem: None Status: Unknown, reported?, may be related to lack of SSAA and or games just not compatible Hegemonia shiney ships and planets are missing http://www.rage3d.com/board/showthr...readid=33719849 Affects: 8500 to 9200 cards only Workaround: None Status: Unknown, reported?, still broken in 3.9 drivers HDTV interlaced resolution slow performance problem if enabled http://www.rage3d.com/board/showthr...&highlight=HDTV Affects: People with a HDTV Workaround for problem: None known about (PM me if you have a solution) Status: reported some time ago, never acknowledged |
|||||||
![]() |
![]() |
Senior Member
![]() ![]() ![]() 加入日期: May 2001 您的住址: 數碼天堂
文章: 1,460
|
1776x1000i doesnt work with the ATI HDTV Adapter
http://www.rage3d.com/board/showthr...readid=33699981 Affects: 1 person (PM me if you want adding) Workaround for problem: Use 3.2 drivers Status: Unknown, reported? has been broken since 3.4 drivers worked fine before then, still broken in 3.8's If you don't have a DDC monitor or don't have a monitor at all (only tv out). The card will not turn on in windows Affects: Everyone who wants to use their PC in home entertainment, may JUST be 9100 users Workaround for problem: Buy or make a dummy monitor plug and disable DDC in ATI control panel, use earlier drivers 3.1? a new bios also helps Status: worse in 3.6 drivers and still broken in 3.9 drivers, some people report they have no problems, reported *UPDATE this will be fixed in a future release* Clive Barkers the Undying problem with snow (Monastary level) and other problems with AF enabled, graphical problems with Wheel of Time also with AF http://www.rage3d.com/board/showthr...adid=1332107543 Affects: 9500 - 9700 users only, works on 8500 Workaround for problem: Problems are only apparent using less than 16x AF,forced triliniar AF helps too, games dont support OGL Dll Status: Unknown, reported, most likely badly coded games but does work fine on Nvidia cards Messed up lighting in DAOC when using torches Affects: everyone http://www.rage3d.com/board/showthr...readid=33666317 Workaround for the problem: None, unless you count waiting for the new engine being developed for the Atlantis addon, in the hope that its fixed Status: reported multiple times, never acknowledged TruForm doesnt work anymore in Morrowind (enabled via the FPS otimiser) http://www.rage3d.com/board/showthr...rrowind+truform Affects: Everyone Workaround: Use 3.2 drivers or earlier Status: Will be fixed in a later driver, reported multiple times, still doesnt work with latest expansion or patch, still broken in 3.9 drivers No loading bar when Morrowind loads a new cell just a coloured screen Affects: Everyone? Workaround for problem: Use 3.5 drivers or earlier Status: unknown, reported, still broken in 3.9 drivers Horrible performance in Star Trek Elite Forces 2 with Stencil Buffer shadows enabled http://www.rage3d.com/board/showthr...4&highlight=EF2 Affects: Everyone Workaround: None Status: Unknown, reported C&C Renegade texturing problems http://www.rage3d.com/board/showthr...stid=1332115009 Affects: 8 users. im one of them (so far) Workaround for the problem: Use 3.4 drivers Status: Will be fixed in a later driver set, Reported, still broken in 3.9 drivers |
||
![]() |
![]() |
Senior Member
![]() ![]() ![]() 加入日期: May 2001 您的住址: 數碼天堂
文章: 1,460
|
IL-2 Sturmovik Forgotten Battles flickering textures
http://www.rage3d.com/board/showthr...readid=33715738 Affects: 9500+ users only ? Workaround for the problem: Turn OFF multitexture in game settings Status: will be fixed in a later driver, reported, broken in 3.8 drivers and still broken in 3.9 drivers IL-2 Sturmovik Forgotten Battles missing textures in perfect mode http://www.rage3d.com/board/showthr...readid=33715738 Affects: 9500+ users only ? Workaround for the problem: Turn ON multitexture in game settings Status: will be fixed in a later driver, reported, broken in 3.8 drivers and still broken in 3.9 drivers IL-2 Sturmovik Forgotten Battles slow framerates http://www.rage3d.com/board/showthr...readid=33715738 Affects: 9500+ users only ? Workaround for the problem: Turn OFF hardware shaders in game settings Status: will be fixed in a later driver, reported, broken in 3.8 drivers and still broken in 3.9 drivers Enemy Territory and RTCW multiplayer flickering loading screen when AA is enabled Affects: Some users Workaround for the problem: None Status: Unknown, reported still broken in 3.9's, may be a game issue Earth and Beyond incorrectly rendered shields Affects: Some users Workaround for the problem: None Status: Unknown, reported? Earth and Beyond Hardlocks http://www.rage3d.com/board/showthr...readid=33699247 http://www.rage3d.com/board/showthr...readid=33704206 Affects: Some users Workaround for the problem: Disable fast writes or use 3.4 drivers Status: Unknown, reported? still broken with 3.9 drivers Dungeon Keeper II horrible performance under Win2k and XP under Win98/Me everything works perfect Affects: At least 1 person, 8500 only, fine on 9500+ cards Workaround for the problem: None Status: Unknown, reported Cultures, Cultures 2, Cultures 3 (Northland) other DirectX (not Direct3D) 2D games display no graphics Affects: 9500+ cards Workaround: Turn down Accelleration 1 notch Status: unknown, reported still broken in 3.9 |
![]() |
![]() |
Senior Member
![]() ![]() ![]() 加入日期: May 2001 您的住址: 數碼天堂
文章: 1,460
|
Toca Race driver texturing problems and slow downs
http://www.rage3d.com/board/showthr...oca+race+driver and http://www.rage3d.com/board/showthr...oca+race+driver Affects: 9500 - 9700 users Workaround: None Status: Unknown, reported TFT screens are not always recognized as TFT screens http://www.rage3d.com/board/showthr...readid=33694284 Affects: Some users Workaround for the problem: None so far Status: Unknown, reported? Z-fighting and polygon gaps in games http://www.rage3d.com/board/showthr...readid=33695406 Affects: some people Workaround for the problem: None Status: a feature which ATI do not plan on supporting at present go to the following link if you want to request it http://apps.ati.com/driverfeedback/ Anarchy Online display corruption when in flight http://www.rage3d.com/board/showthr...=anarchy+online Affects: 9500 and up users Workaround for the problem: None Status: Unknown, reported. Requires W buffer support for 9500+ cards (most likely via software emulation, as the cards don抰 have hardware support) Please go to the following link to request this to be added to the drivers or ask developers to add improved Z buffer support for the game http://apps.ati.com/driverfeedback/ Anarchy Online Shadowlands New water effect has corruption http://www.rage3d.com/board/showthr...stid=1332269714 Affects: 9500 and up users Workaround for the problem: None Status: Unknown, reported? Slow Frame Buffer access speed http://www.rage3d.com/board/showthr...ht=frame+buffer Affects: Everyone who uses PSX emulators and older games Workaround: Use OGL plugin instead for now its a bit faster Status: ATI aware and ATI QA filed bug report with driver devs, doesnt seem to be a high priority though still slow with 3.9 drivers Problem with data corruption when large system cache option is used in Windows XP and Win2K and your hard drive is in NTFS format Affects: Everyone Workaround: There is a registry tweak that's supposed to fix this http://www.ati.com/support/infobase/4217.html also one user reports setting your AGP apature size to 16MB or less stops the corruption happening too (requires someone brave to test this further) Status: ATI aware, reported multiple times , registry tweak to fix it for now, still broken in 3.8's without the reg tweak Gamma settings reset back to defaults when exiting a game Affects: Everyone who doesn’t use default gamma settings Workaround: None Status: Unknown, reported multiple times has been broken since start of the drivers even on 'classic' cards, still broken with 3.9 drivers |
![]() |
![]() |
Senior Member
![]() ![]() ![]() 加入日期: May 2001 您的住址: 數碼天堂
文章: 1,460
|
OpenGL game gamma cant be adjusted with the 3D full screen gamma option
http://www.rage3d.com/board/showthr...readid=33707094 Affects: Everyone who doesn’t use default gamma settings Workaround: Use the Desktop gamma setting instead and that will adjust it Status: Unknown, reported? Messed up textures and backgrounds in older games, Carmageddon and Final fantasy VII for example (PM me if you have others) Affects: Everyone Workaround for problem: None Status: Requires implementation of 8-bit palletized texture support (may need emulation as hardware doesn’t appear support it natively), if you wish to petition ATI to add this feature to the drivers http://apps.ati.com/driverfeedback/ Possible method it can be done (suggested by Colouless) Emulating Palettized Textures can be done reasonably fast using Dependant Texture Reads or EMBM (which is just a simple form of depentant texture reading). You use the dependant texture read to emulate the palette lookup when the texture is being used. However, when using this method the quality is generally 'poor' or the speed is 'poor' since you can't use hardware bilinear filtering. You will have to use point sampling, or do all the filtering in a pixel shader (NOTE BY ME None of the drawbacks are really a problem as we are talking about a compatability mode for OLD games that would be running fast anyway and dont use pixel shaders for other purposes) Missing VESA 2 support for DOS games and screen corruption Affects: people who play older games Workaround for problem: Change screen resolutions or enable TVOUT (via hotkeys) Status: Unknown, If you wish to petition ATI to add this feature to the drivers http://apps.ati.com/driverfeedback/ Missing Super Sampling AA modes for games (will fix bugs in Homeworld AA and Tribes 2 AA The Longest Journey, Grim Fandago, Thorgal's Quest, Odyessy Search for Ulysses for example) Affects: Everyone Workaround for problem: None Status: a feature which ATI do not plan on supporting at present If you wish to petition ATI to add this feature to the drivers http://apps.ati.com/driverfeedback/ TVout and monitor display not saving settings when at different resolutions and flipping between them also lowers the refresh rate Affects: 1 user confirmed (PM if you want adding) Workaround for problem: None Status: unknown Slowdown / stuttering in D3D/openGL with AMD MPx dual chipsets Affects: Quite a few people (if not all). Workaround for problem: START->RUN->SMARTGART and disable AGP reads/writes completely removes stuttering, or BIOS->AGP APERTURE SIZE down to 32MB which helps reducing the length of the stuttering Status: Been getting better every Catalyst release since 2.3, but still 9FPS at times. Solved 10s pauses in 3dsmax5, common pauses in Blood Rayne etc etc. Extreme slowdown with Silent Hill II using shadows, with AMD MPx dual chipsets Affects: Everyone with 9700+ and AMD MPx? Workaround for problem: Disable AGP reads/writes Status – in progress? Texture clamping in OGL not working for certain games Alice, Icewind Dale, Q3 Urban Terror Diablo II, Quake3 engined game skyboxes Link ? Use the Feedback form to request a compatability mode to fix this issue http://apps.ati.com/driverfeedback/ Affects: Everyone Workaround for problem: ATI's method works as it should, but problems where games were written for NV hardware only Status: Unknown, reported multiple times |
![]() |
![]() |
Senior Member
![]() ![]() ![]() 加入日期: May 2001 您的住址: 數碼天堂
文章: 1,460
|
Mouse cursor disappears in XP, and major game artifacts ABIT KT7A-RAID v1.1
Affects: 3 Users all with 9500 cards (PM if you want adding) Workaround for problem: Turn off Fast Writes Status: unknown, reported? Metal Gear Solid 2: Substance certain cinematics where everything turns black it first appears when Snake enters the bridge on the Tanker http://rage3d.com/board/showthread....readid=33697933 Affects: 2 people, (PM me if you want adding) Workaround for problem: Use 3.2 drivers or older Status: unknown, reported multiple times, has been an issue from at least 3.4 * STILL BROKEN IN 3.8 *, works fine on my computer Celestia 1.3 (OpenGL)Texture corrupts on planets with rings if ring shadow is enabled Rendering becomes very slow also http://www.rage3d.com/board/showthr...readid=33680454 Affects: 8500 - 9100 users Workaround for problem: The only known workaround is to turn of ring shadows Status: unknown, reported? still broken in 3.8 drivers Win98 60HZ refreshrate problem http://www.rage3d.com/board/showthr...ghlight=refresh Affects: Lots of people Workaround for problem: change the idcregoptiondontuseosmonitorinfo reg key Status: being looked into? ATI taskbar icon & keypoller causing problems in games and applications certain keypresses not working or keys not being pressed are displayed, keypoller also causes stuttering in games also sometimes makes games auto minimise to the taskbar http://www.rage3d.com/board/showthr...stid=1332318213 Or http://www.rage3d.com/board/showthr...#post1332088279 Affects: Some people Workaround for problem: Remove the ATI taskbar icon via the options in the display properties and or disable the ATI key poller service via the services in the control panel Status: being looked into? see above thread for an update Empire Earth Mouse cursor leaves trails when moving over 2D objects and all text is missing when AA is enabled http://rage3d.com/board/showthread....readid=33697851 Affects: Some people, 9700 - 9800 reported so far Workaround for problem: None Status: Unknown, reported? The mouse trails happen once in awhile in WinME when AA is enabled. The text works fine with AA enabled in WinME, BOTH dont work in XP Combat mission: Barbarossa to Berlin has graphics glitches with AA enabled, Main menu is invisible and In-game textboxes are white-on-white http://www.rage3d.com/board/showthr...ight=Barbarossa Affects: Quite a few people Workaround for problem: link to fix the text problem here http://www.battlefront.com/cgi-bin/...ic;f=8;t=004120 Status: Unknown, reported? *Menu problem is fixed in 3.6* Rise Of Nations partly red square around the cursor when AA is used in game moving units http://www.rage3d.com/board/showthr...stid=1332092367 Affects: 2 9800 users, 2 9700 user Workaround for problem: None Status: Unknown, reported? Works fine on Nvidia cards |
![]() |
![]() |
Senior Member
![]() ![]() ![]() 加入日期: May 2001 您的住址: 數碼天堂
文章: 1,460
|
Michelin Rally Masters starting a multiplayer game crashes back to desktop ver 3.2
http://www.rage3d.com/board/showthr...t=rally+masters Affects: A few users Workaround for problem: None Status: Unknown, reported, tested with catalyst 3.4 and 3.5 (and with DX 8.1) missing refresh rates in driver for monitors able to support them http://www.rage3d.com/board/showthr...stid=1332096031 http://www.rage3d.com/board/showthr...readid=33702290 Affects: people with modern monitors Workaround for problem: Use Powerstrip, download monitor inf file and also use refreshforce http://www.entechtaiwan.com/ps.htm Status: Unknown, reported? Smartgart disabled all directx and agp functions on two different motherboards Asus P4533s and MSi 875p Neo Affects: 9700 - 9800 pro users Workaround for problem: Do a manual driver install Status: Unknown, reported? Smartgart disables AGP 8x and Fastwrites on some Nforce2 motherboards Affects: Some users Workaround for problem: Do a manual driver install or use the Smartgart uninstaller on the ATI driver page Status: Unknown, reported? Rollcage Stage II and Microsoft Return of Arcade D3D left in unusable state without reboot Link? Affects: 1 user (PM me if you want adding) Workaround for problem: None Status: Unknown, reported? Ground Control AA doesnt work anymore with 2nd monitor enabled Link? Affects: Everyone? Workaround for problem: works if you dont have a 2nd display otherwise use 3.2 drivers Status: Unknown, reported? I can replicate this one Problem with 9600 cards and hardware mouse pointer and games crashing http://www.rage3d.com/board/showthr...readid=33699231 Affects: 5 people (PM me if you want adding) Workaround for problem: Enabling mouse trails in the control panel forces mouse pointer to software mode and games work again Status: Will be fixed in a future driver update, reported? still broken in 3.9 Video overlay surface has its horizontal resolution divided by 2 when high resolutions with 175mhz pixel clock http://www.rage3d.com/board/showthr...readid=33699533 http://billou2k.free.fr/ati/indexati.htm http://www.rage3d.com/board/showthr...readid=33648127 http://www.rage3d.com/board/showthr...readid=33674107 http://www.rage3d.com/board/showthr...readid=33669882 Affects: Lots of people on all ATI cards Workaround for problem: Use a lower refreshrate or lower resolution for video playback Status: Unknown, reported, may be a hardware limitation, same problem on Matrox cards but not Nvidia |
![]() |
![]() |
Senior Member
![]() ![]() ![]() 加入日期: May 2001 您的住址: 數碼天堂
文章: 1,460
|
Sonar 2.2 Doesnt run on AIW cards, conflicts with Rage Theater Audio driver
http://www.rage3d.com/board/showthr...highlight=sonar Affects: AIW users Workaround for problem: Turn off the RT audio driver and it will work Status: Unknown, reported, still broken in 3.8's Enabling any kind of anisotropic filtering in PlanetSide results in the mipmap boundaries being clearly visable Link? Affects: 3 People (PM me if you want adding) Workaround for problem: use Rtool to force Trilinear AF Status: Unknown, reported? PlanetSide has clipping problems / wrong textures being used on hills Link? Affects: 4 People (PM me if you want adding) Workaround for problem: None Status: Unknown, reported? been broken since 3.5 drivers PlanetSide crashes to desktop Link? Affects: 5 People (PM me if you want adding) Workaround for problem: 3.4 drivers Status: Unknown, reported? has been broken since 3.5 drivers, still broken in 3.7 drivers Steel Tide has flickering textures on walls and the sea floor http://www.rage3d.com/board/showthr...readid=33701052 Affects: 1 Person (PM me if you want adding) Workaround for problem: Set ingame textures to medium or low and the flickering goes away Status: Unknown, reported still broken in 3.9 drivers Ultimate Race Pro animations distorted and fog problems http://www.rage3d.com/board/showthr...timate+race+pro Affects: 1 Person (PM me if you want adding) Workaround for problem: Use 3.2 drivers or earlier Status: Unknown, has been reported, been broken since 3.4 drivers, still broken in 3.7 drivers Incoming has graphical problems with flashing sky and random fire displayed from enemy ships and other odd artifacts http://www.rage3d.com/board/showthr...readid=33702163 Affects: 1x 7000 and 3x 8500 (all owned by one person) Workaround for problem: use 2.5 drivers Status: Unknown, Reported multiple times, has been broken since 3.0 drivers, still broken in 3.9 drivers Jane's F/A - 18 Combat Simulator problem with Air to Air radar modes causing FPS slowdown with AA enabled http://www.rage3d.com/board/showthr...readid=33703098 Affects: 9500+ cards Workaround for problem: None Status: Unknown, Reported, still broken in 3.8 drivers Logitech OSD software causes stuttering when used during 3D games http://www.rage3d.com/board/showthr...readid=33705380 Affects: 5 people (PM me if you want adding) Workaround for problem: None Status: Unknown, Reported? only seems to happen on OGL, problem with other multimedia keyboards and OSD's too Problem selecting polygons in Softimage http://www.rage3d.com/board/showthr...readid=33707597 or http://www.softimage.com/community/...04/msg00889.htm Affects: Everyone who uses the program Workaround for problem: Buy expensive FireGL card which doesnt have this problem, or use the softmod to install the drivers Status: Unknown, Reported. works fine on Nvidia cards, has also been reported by me with 3.7 drivers as I can replicate the problem, still broken in 3.8's |
![]() |
![]() |
Senior Member
![]() ![]() ![]() 加入日期: May 2001 您的住址: 數碼天堂
文章: 1,460
|
Maya 5 problems with Sculpt tool leaving trails, also a problem with creating new Isoprams
http://www.rage3d.com/board/showthr...stid=1332304965 Affects: 9500+ users Workaround for problem: Buy expensive FireGL card which doesnt have this problem, or use the softmod to install the drivers Status: Unknown, reported, still broken in 3.8 drivers SolidWorks 2003 Intersecting lines dissapear and only reappear when mouse is over them http://www.rage3d.com/board/showthr...readid=33720137 Affects: 9500+ users Workaround for problem: Buy expensive FireGL card which doesnt have this problem, or use the softmod to install the drivers Status: Unknown, reported? Alpha blended cursors problem in XP http://www.rage3d.com/board/showthr...stid=1332208153 or http://www.neowin.net/forum/index.php?showtopic=97548 Affects: 8500, 9000, 9100 only Workaround for problem: turn down Hardware acceleration a notch Status: Unknown, Reported Toca race driver crash to desktop when on single race and rainy selected Affects: 7500 users only Workaround for problem: None Status: Unknown, Reported, broken in 3.7 drivers Links 2001 has lines running through the graphics with or without AA and AF Affects: 2 users 9500 (PM me if you want adding) Workaround for problem: None Status: Unknown, Reported? before 3.7 drivers it was only broken when AA and AF was used now its all the time the 'Default ON' option for Vsync is broken for OGL if the game is run in a window, works fine if the 'always ON' option is used instead http://www.rage3d.com/board/showthr...stid=1332233262 Affects: 9500+ cards (maybe more PM me if its the same on 8500 or less) Workaround for problem: None, except using 'ALWAYS ON' Status: Unknown, Reported, this has also been reported by me, still broken in 3.9 drivers Corrupt windows text with ALi chipset motherboards http://www.rage3d.com/board/showthr...stid=1332244350 Affects: 8500, 9100 and 9600, 9700 cards 3 users (PM me if you want adding) Workaround for problem: check thread for a couple of system tweaks but they dont fix the problem entirely Status: Unknown, Reported Corrupt graphics on NHL2004 with ALI chipset motherboards Affects: 2 Users Workaround for problem: None Status: Unknown, Reported Homeworld2 problem with game going to a black screen on startup (not all the time though), problems with shadows, AA causing FPS to goto 1FPS also and random crashes http://www.rage3d.com/board/showthr...readid=33712391 Affects: 9500 - 9800 users Workaround for problem: 3.6 or earlier drivers work better Status: Unknown, reported May need a game patch to fix some of the issues, still broken with 3.9 drivers Jedi Academy screen flashes and crashes with save games http://www.rage3d.com/board/showthr...readid=33709069 Affects: 9500+ cards Workaround for problem: Turn off dynamic glow for now to stop the flashes Status: Unknown, reported, may need a game patch, no screen flash problem with 5600FX card but the game still crashes, still broken with 3.9 drivers |
![]() |
![]() |
Senior Member
![]() ![]() ![]() 加入日期: May 2001 您的住址: 數碼天堂
文章: 1,460
|
Tiger Woods 2004 doesnt have an option to run at 1600 x 1200 but does on Nvidia cards
http://www.rage3d.com/board/showthr...stid=1332282712 Affects: Everyone Workaround for problem: None Status: Unknown, reported, May need a game patch, see thread for more details Tiger Woods 2004 crashes or reboots the PC randomly and also locks up with 1024x768 2xAA http://www.rage3d.com/board/showthr...readid=33713020 Affects: Lots of people Workaround for problem: None Status: Unknown, reported? the game also crashes for Nvidia users so may need a game patch to fix Halo Nightvision doesnt work on sniper rifle with 3.8 drivers http://www.rage3d.com/board/showthr...readid=33715831 Affects: 9500+ cards Workaround for problem: use 3.7 drivers or force pixel shaders version 1.4 via the -use14 option added to the end of the game shortcut Status: Unknown, reported, still broken in 3.9 drivers No D3D smartshaders in the control panel in 3.8 drivers http://www.rage3d.com/board/showthr...readid=33715783 Affects: 8500 - 9200 users Workaround for problem: None Status: Unknown, reported? 3D control panel not showing 2xAA for D3D as being set when custom mode is used to enable it http://www.rage3d.com/board/showthr...readid=33715822 Affects: Everyone Workaround for problem: Exit the gontrol panel and go back in and it shows fine, so is just cosmetic I think Status: Unknown, reported Once Upon a Knight graphics corruption with 3.8 drivers http://www.rage3d.com/board/showthr...readid=33716015 Affects: 9500+ cards only Workaround for problem: use 3.7 drivers they work fine or disable the shader engine in the game config and use T&L instead Status: Unknown, reported, fixed for 8500 - 9200 users in 3.9 drivers still broken for 9500+ users Grand Prix Legends semi transparent trees and other objects that should be solid http://www.rage3d.com/board/showthr...#post1332315580 Affects: 8500 users only Workaround for problem: use 3.2 drivers Status: Unknown, Reported?, has been broken since 3.4 and is still broken in 3.8's Starfleet Command III missing weapons fire and shields http://www.pwfe.com/dwforums/index....t=ST&f=2&t=984& Affects: 9500+ cards only Workaround for problem: use 3.7 drivers Status: Unknown, Reported? broken in 3.8 drivers, still broken in 3.9 drivers Britneys Dance Beat movies dont play Link? Affects: Everyone ? Workaround for problem: Use K-lite codec pack from http://www.freecodecs.com and the movies show up fine Status: Unknown, Reported, works fine on Nvidia cards Madden 2004 corrupt crowd and player graphics with 3.8 drivers http://www.rage3d.com/board/showthr...readid=33715876 Affects: A few users no consistant card or motherboard Workaround for problem: Use 3.7 drivers Status: will be fixed in a later driver, Reported Fifa 2003 corrupt graphics with 3.8 drivers http://www.rage3d.com/board/showthr...readid=33715876 Affects: A few users no consistant card or motherboard Workaround for problem: Use 3.7 drivers Status: will be fixed in a later driver, Reported Max Pane 2 Pixel Shader Skinning looks incorrect http://www.rage3d.com/board/showthr...readid=33717226 Affects: 8500 to 9200 cards only Workaround for problem: None known Status: Unknown, Reported? |
![]() |
![]() |