唉.......試試final data 或其他recover軟體試試.....format可以救,低階格式化沒試過能不能救......總之試試看好了~~

ps.format過的那顆硬碟千萬別作任何的寫入動作.........要不然.....真的沒救了....
祝福您~~

我都沒作任何寫入的動作，只是重開機而以
還有我的email是[email protected]
再一次拜託各位大大
這是別人的電腦，他還不知我幫他修電腦的事
我本來只是想好心幫他修壞鬼的那顆，沒想到！沒想到！
天呀！我發肆，再也不不敢用這軟體了！

低階格式化....沒救了!
不過,低階格式化要很久很久才會完全Format掉....您有完成低階格式化程序嗎?....有則完全沒救,除非是找高人拆開硬碟來想辦法(像FBI那種),沒有,或許尚有一線生機....

低階格式化....沒救了!
不過,低階格式化要很久很久才會完全Format掉....您有完成低階格式化程序嗎?....有則完全沒救,除非是找高人拆開硬碟來想辦法(像FBI那種),沒有,或許尚有一線生機....



看到大大這樣說！我的心涼了一大半，我的確是低階格式化了，因為很久才format完，而我剛有問到一個方法就是用unformat，所以又打了一次
ideinit 1 // unformat c:
它現在正在跑，不知道有沒有用。難到真的沒救了嗎？
要拆硬碟也沒問題，要花錢我也願意，只要能在他還沒發現時救回來
要我怎樣我都願意。只是我剛有打電話去硬碟搶救公司，他們都下班了，六日又不
上班，我真的是……想哭又哭不出來~~~

unformat不太能完全救回來.......

永達哥哥，

放輕鬆，越十萬火急，越生死尤關的事，越要沈著，越要冷靜

http://home.pchome.com.tw/web/tutor.../foreignlab.htm







台灣有那些「硬碟醫生」？
06-2581552 伯爵電腦 謝先生
02-27731122 凌威科技 江先生
02-22724234 軟拷網 Mr. Jackie
02-27130128 拓源國際
0930900138 NG電腦 張先生
0936511811 周先生
不屑操刀、隱姓埋名的硬碟華陀......。
那到底誰比較高明呢？看倌！從專業能力、經驗、醫德、口碑幾個方面，多問，多打聽。

如何找國外專業的實驗室，解決故障硬碟資料救援與回復的問題？

1. 利用yahoo入口網站搜尋引擎，鍵入關鍵語“Data Recovery”，可以找到約170個相關的網站。

2. 首十個比較著名的網站如下：

◎ http://www.cbltech.com/
◎ http://www.actionfront.com/
◎ http://www.ontrack.co.uk/
◎ http://www.datarecoverygroup.com/
◎ http://www.recovery-uk.com/
◎ http://datarecovery.mjm.co.uk/
◎ http://www.datarr.com/index.html
◎ http://www.acodisc.com/
◎ http://www.data-recovery-people.com/
◎ http://www.datarecovery.net/

我覺得應該是沒救了
安息吧DATA

The following program is provided as is without any warranty of any
kind, either expressed or implied. The entire risk as to the quality and
performance of the program is with you the user. In no event will MAXTOR
CORPORATION be liable to you for any damages, including any loss of profit
or savings, arising out of the use or inability to use this software.
Maxtor Corporation makes no representations or warranties with respect to
the contents hereof and specifically disclaims any implied warranties of
merchantability or fitness for any particular purpose.

The following program will destroy all data that resides on your hard drive.

IDE_INIT.EXE
For Maxtor 7000AT Series Drives:

To proceed TYPE "IDE_INIT 1" for drive 1 or C:

"DO NOT TYPE" "IDE_INIT 2" for drive 2

WARNING! This program will not initialize drive two, but instead default
back to the first drive.

QUICK SOLUTION: ONLY INITIALIZE ONE DRIVE AT A TIME, THIS METHOD
WILL ENSURE THAT THE PROPER DRIVE IS ACTED ON.

***NOTE: When the first screen of the program comes up, the
display will indicate the BASE and CURRENT GEOMETRY.
For some MAXTOR drives the CURRENT GEOMETRY will be
filled in with 00, 00. Please ignore this paramater
but instead look at the BASE GEOMETRY, which will
indicate the cylds, hds, sectors. These values should
closely resembly the CMOS settings. Except for the CYLDS
which may be off by one cylinder count. Still go ahead
and initialize the drive. This is a common occurance
with this version of software.

***NOTE: IDE_INIT is not a lowlevel format but instead an intializing
program. This program will write zeros (00) to every byte on
the disk media. This program WILL NOT find defective spots and
write them to a defect map.

一些找來的說明,根據上面的話:

它一次只認一顆硬碟
它會把硬碟所有位置填 00
它不能修(標示)壞軌

MAY THE FORCE BE WITH YOU
--
難怪這麼小(汗)|||

照大大的說法
這個軟體還真的強耶~~~
也就是沒救了~
>.<