1.先恢復原本的驅動程式.再將驅動認證取消.重開機.再先插電視卡.如自己抓不到再安裝驅動.重開.......ok

2.恭喜你.可能dll檔or other有問題.需要Os重新安裝......

Test it

資料不正確/The Data is Invalid

Part 1 explains why you get error message installing a new device in Windows XP

Part 2 explains the steps to install new device if you get "The Data is Invalid" message

Part 1 - "Data is invalid" error installing device drivers under Windows XP

The following information applies to system configurations where an attempt is made to install device drivers under Windows XP.

Under certain conditions, you may experience an error stating "Data is Invalid" when attempting to install drivers.

This issue is not ATI specific. This error can also occur when configuring drivers for a variety of hardware devices such as SCSI cards, network cards, Modems, Sound Cards, or other peripherals.

This symptom appears to occur when there has been a recent hardware configuration change within Windows XP.

Should a display driver be affected, you will be limited to VGA resolutions only.

This error is believed to be due to an issue occurring when hardware enumeration takes place by the operating system. The cause of the error is unknown.

Although no known solution has been documented, customers have noted that removing and reinstalling the operating system corrects this issue.

INFO-BASE file # 4037

Keywords: ALL PRODUCTS for PC WINDOWS XP DATA INVALID

(source: http://www.ati.com/support/infobase/4037.html )

Part 2 - "The data is invalid" Windows XP

This article only applies to Window XP. Xtra does not accept liability for any problems that might occur from the following article. If you aren't sure how to follow the instructions then please consult technical support.

If you get the error "The data is invalid" while installing a new modem into your system, you can resolve the error by following these steps.

Click "Start" and select "Run".

Type in "regedit" in the open field and click "OK".

The Registry Editor will then appear on the screen

Click on the (+) icon next to the word "HKEY_LOCAL_MACHINE"

Click on the (+) icon next to the word "SYSTEM"

Click on the (+) icon next to the word "CurrentControlSet"

Click on the (+) icon next to the word "Enum"

Click on the (+) icon next to the word "PCI"

Inside the "PCI" folder there are keys like this :

(VEN_1471&DEV_0188&SUBSYS_5004144F&REV_10)

Each of these keys represent a device installed in your PC. You need to go through all of these keys one at a time.


Click on the (+) icon next to the first key and then a subkey will appear below it like this:

3&13c0b0c5&0&10


Click on this key and on the right hand side there will be a value called "DEVICEDESC"

Search through all of the "DEVICEDESC" values for each key. You need to match the "DEVICEDESC" value with the type of device you are installing.

For ADSL Modems this will read "Network Controller". For PCI Modems this will read "PCI Communications Device". For example if the device you are trying to install is an ADSL modem then the "DEVICEDESC" would be "Network Controller". Or, if the device you are trying to install is a PCI modem then the "DEVICEDESC" would be "PCI Communications Device".


Once you have searched through each of the keys and found the correct "DEVICEDESC" right click on it, and select "Permissions".

Place a tick in the box under the word "Allow", next to "Full Control".

Click on "OK"

Close the Registry Editor.

Click on "Start", then select "Control Panel".

Open the "System" control panel.

Select the "Hardware" tab.

Click the "Device Manager" button.

Look for the "Other Devices" heading and click on the (+) symbol next to it.

Right click on the device name that matches the "DEVICEDESC" value you changed in the registry and select "Properties".

Click on the "Driver" tab at the top of the screen

Click the word "Update Driver". Windows will now ask you for the disk or CD-ROM that contains the driver for the failing device.
Once you insert the media and point it to the correct location then the device will now install itself correctly without any errors.

(source: http://www.xtra.co.nz/help/0,,6156-1359658,00.html