![]() |
||
Junior Member
![]() ![]() ![]() 加入日期: May 2005
文章: 822
|
USB能夠退出後不重新插拔而直接重新掛載嗎?
想請問各位
小弟有時需要暫時移除隨身碟,拔掉後,,等有需要時再插回去 但是想想有點麻煩,,Windows裡面是否有可以退出隨身碟後,,不拔,,,在有需要使用的時候,,再行重新掛載的功能呢?~還是有無什麼小程式可以做到這點(如果免費的是最好啦) ![]() |
|||||||
![]() |
![]() |
*停權中*
加入日期: May 2014 您的住址: 某個不大不小的島
文章: 628
|
可以試試這個, 但不保證.
Problem: My USB device will occasionally lose connection to the computer, and I have to disconnect and then reconnect it before it will work. Why does this happen, and how can I get Windows to redetect the device, without having to physically disconnect the device? Solution: This behavior occurs when the device loses power, but the computer does not. For example, often when a computer goes into standby or power-save mode it will often shut down power to the USB ports. Also, this can happen when a computer returns from having been hibernated. In either case, the device is not redetected by the computer and thus you will not be able to communicate with it. Follow the instructions below to redetect the device within Windows when this happens: Install the DevCon utility from Microsoft. The DevCon utility is a command-line utility that acts as an alternative to Device Manager. Using DevCon, you can enable, disable, restart, update, remove, and query individual devices or groups of devices. You can download DevCon from http://support.microsoft.com/kb/311272. If you are running Windows 7, it is recommended that you download DevCon as part of the Windows Driver Kit (WDK) 8.0. This can be downloaded from http://msdn.microsoft.com/en-us/library/windows/hardware/ff544707(v=vs.85).aspx. Open the Windows Device Manager by going to Start » Run, type in devmgmt.msc, and then click the OK button. |
||
![]() |
![]() |
*停權中*
加入日期: Oct 2016 您的住址: NewTaipeiCity
文章: 48
|
不見得幫得上忙的回應∼∼∼
MsWindows一段時間沒碰,我真的忘了。 MacOSX的話,有一內建一個圖形介面的“磁碟工具程式”,其中有按鈕選項可以掛載、退出“外接裝置”(裝置的圖示只要裝置有插著理論上就會出現,另外有圖示表示有無在掛載中)。 MsWindows環境理應要有類似概念的圖形介面操作選項才是,或許沒有捷徑圖示,需要在檔案總管中另外一個一個去找出來? 又或者在控制台一個一個去找找看? |
![]() |
![]() |
*停權中*
加入日期: Sep 2001
文章: 1,253
|
sudo mount -t xxx /dev/sdx /home/user/xxx
windows 莫宰羊 |
![]() |
![]() |
Junior Member
![]() ![]() ![]() 加入日期: Feb 2013
文章: 760
|
|
![]() |
![]() |
Major Member
![]() 加入日期: Feb 2005
文章: 167
|
注意:若要將外接式硬碟插在桌機上,
盡量插在電腦後面的USB主機板孔上,這樣才能確保供電穩定, 因為機殼前置USB供電會比較弱, 相對的也易造成硬碟故障。(很多人的壞習慣) 這小動作真的相當重要! 網友提問: 藤大,如果我把影片放到外接硬碟上,直接上外接硬碟上讀取影片, 這樣是否會有影響? 影片都是高畫質720P以上的,單個影片檔容量大約都是3GB~6.5GB左右? 藤曰: 一樣道理。你是直接透過外接硬碟去讀片,一開始可能都還OK, 日積月累下來,所使用的外接式硬碟也是容易受損。 最後的一個重點: 買回來的外接式硬碟,請檢查硬碟的格式若為FAT32,這種傳輸資料會很慢。 建議將它格式化,選NTFS模式, 這樣在傳輸資料就會比較快哦! 但是,改為NTFS之後,就會無法從系統中正常卸除外接式硬碟, 得將電腦關機之後才能拔外接式硬碟。 而FAT32,則有支援熱插拔(也就是從系統中卸除) 請自行抉擇。 摘錄自:藤小二電腦修配坊 http://kato3c.pixnet.net/blog/post/...8C%91%E9%81%B8- |
![]() |
![]() |
*停權中*
加入日期: Apr 2015
文章: 60
|
買一個帶開關的usb hub,不用再傷腦筋了∼^_^
|
![]() |
![]() |
Advance Member
![]() ![]() 加入日期: Jan 2013
文章: 417
|
基本上就是到裝置管理員找到隨身碟所插的USB埠之硬體裝置,然後停用後再啟用即可,
前面魔王兄所提供的命令列工具也是做這個事。 |
![]() |
![]() |
Advance Member
![]() ![]() 加入日期: Aug 2013 您的住址: 台南or台北
文章: 398
|
引用:
推這套,超好用,介面又漂亮,還可移除後直接斷掉外接式硬碟的 電源,不用擔心拔掉後外接式硬碟突然斷電讀寫頭還未規未造成的 傷害。 |
|
![]() |
![]() |
Power Member
![]() ![]() 加入日期: Feb 2005 您的住址: 新北市中和區
文章: 552
|
引用:
剛好上星期有買一個外接裝置(內含讀卡機, 還可以同時插上2顆硬碟, 所以這台裝置最多可以同時出現3個USB裝置磁碟代號)... 所以正好有這個問題(硬碟已經插上去, 要拔插TF時又習慣先卸載裝置, 一旦卸載後, 再插上TF卡, 是抓不到TF卡, 除非拔插USB線, 或是將這台外接裝置的電源整個關掉重新打開) 剛拿一個TF卡試一下這個軟體, 感覺不錯用( "讓裝置回來吧!" 這個功能好好用)... 過陣子要備份資料時, 再把此外接裝置打開試試(用途僅是備份資料, 所以頂多每幾個星期打開個一次)... . |
|
![]() |
![]() |