|
||
|
Amateur Member
 加入日期: Mar 2012 您的住址: 新莊
文章: 41
|
求救!我的SAS 4TB硬碟只有16XXGB
如題
在HIGH POINT 2640X1的BIOS[V1.1版]中只顯示21XXGB 而在WIN7 64 中卻是16XXGB 為何會如此? 請各位前輩不吝解答 |
|||||||
2013-05-06, 11:24 AM
#1
|
|
|
Advance Member
  加入日期: Jun 2003 您的住址: TAIWAN
文章: 395
|
可能需要更新 firmware
v1.2 05/22/2012 * Add support over 2TB HDD. v1.3 08/30/2010 * Fix display error with expander. * Support legacy single mode. v1.2 08/01/2008 * Fix adapter PCI SERR assertion during BIOS scan. * Fix SAS disk detection issue on cold boot. * Remove Port Multiplier check. v1.1 06/17/2008 * Fix hard drive(HVS153073VLS300/HDS725050KLA360) detect issue. v1.0 03/26/2008 * First release |
||
|
2013-05-06, 12:05 PM
#2
|
|
|
Amateur Member
加入日期: Mar 2012 您的住址: 新莊
文章: 41
|
在更新BIOS及驅動程式後
在BIOS中出現4TB的容量 但進入WIN7後又只剩1.6TB 真是詭異 |
|
2013-05-09, 06:10 PM
#3
|
|
|
Major Member
 加入日期: Mar 2001 您的住址: Taiwan
文章: 162
|
上面是不是有 Partition 了?
請先轉換硬碟格式成 GPT 吧~~ |
|
2013-05-10, 11:21 AM
#4
|
|
