|
||
|
Major Member
 加入日期: Dec 2001 您的住址: 中和,板橋,新莊我都方便
文章: 186
|
ISO 轉 BD-RE DL (50G->50G) 超過容量, 怎辦
AnyDVD 6630 轉成的 ISO
可用 PowerDVD 播放 但用 ImgBurn 2510 燒錄至 SONY BD-RE DL (50G) 出現 Image Size 24,111,104 Sectors(47,092 MB) Disc Size 23,652,352 Sectors(46,196 MB) Would you like to continue anywhy? 試過 continue, 結果是 Fail, 改用 CLoneDVD2 也是容量不足的訊息. 請問單兵如何處置?
__________________
改收Discovery系列 此文章於 2010-03-28 11:25 AM 被 srv 編輯. 原因: 問題可以表示的比較清楚 |
|||||||
2010-03-28, 11:18 AM
#1
|
|
|
Basic Member
加入日期: Dec 2001
文章: 13
|
用 BD-R DL 可以
|
||
|
2010-03-29, 03:33 PM
#2
|
|
|
Power Member
加入日期: Oct 2001 您的住址: Canada
文章: 525
|
引用:
有沒有把預藏糾錯空間給釋放出來?? 如果DL ISO to DL的話用Imgburn. |
|
|
2010-03-29, 06:41 PM
#3
|
|
|
Amateur Member
 加入日期: Dec 2004 您的住址: Tainan
文章: 38
|
用DVD Fab把IS0檔內****和不要的語言字冪去悼看看,我都是以BD一R燒錄從未發生問題.OR In ImgBurn 設定如下: 1.switch the file system option"UDF" on the option Tab
2.Enable the "Allow Files Exceeding Size Limit" option on the advance -Restriction-ISO9660 Tab" |
|
2010-03-29, 08:46 PM
#4
|
|
|
Major Member
加入日期: Dec 2001 您的住址: 中和,板橋,新莊我都方便
文章: 186
|
謝謝大家!!
測試成功了!! 總結一下 拿到新的 BD-RE 要記得先拿 ImgBurn 低階格式化一下才能使用到最大的容量. ImgBurn 預設就是 Perfer Format without Spare Areas, 所以直接 Erase Full 即可 . 完成後記得退片, 再重新讀取即可. 網路上看到這篇, 應該算是解答了. 做完之後, 還要退片再重讀一次. Once you have the media, you want to do a low-level format. To do this, run ImgBurn, and open up Tools > Settings > Write. Check the box next to "Prefer Format Without Spare Areas." This sets ImgBurn to format without a SSA if possible. Then do a full erase. (It calls it a full erase, but it's actually sending the FORMAT UNIT command to the drive.) After you do this, eject and re-insert the disc so that Vista recognizes the extra space. = ImgBurn Disc Info (factory formatted) = Preferred Format Capacity: Sectors: 2,236,704 Size: 4,580,769,792 bytes Time: 497:04:54 (MM:SS:FF) Maximum Format Capacity: Sectors: 2,295,072 Size: 4,700,307,456 bytes Time: 510:02:72 (MM:SS:FF)
__________________
改收Discovery系列 此文章於 2010-03-31 05:49 AM 被 srv 編輯. |
|
2010-03-31, 05:46 AM
#5
|
|
