|
||
|
Basic Member
加入日期: Sep 2001 您的住址: 南投
文章: 10
|
m2m4-sli 支援 NCQ ?
如題.....因為我查不到
所以問問板上的大大們 這塊版子有支援 NCQ嗎 ? m2m4-sli http://taiwan.asus.com.tw/products....266&modelmenu=2
__________________
猴死囝仔＠＠ |
|||||||
2007-12-14, 10:15 PM
#1
|
|
|
Elite Member
  
加入日期: Sep 2006 您的住址: Mt.Ali
文章: 4,548
|
印象中nForce 4高階版開始、nForce 5以後全系列都會有，
不知道有沒有記錯。
__________________
簽名檔配備常常僅供參考，所以不列了 |
||
|
2007-12-15, 06:17 AM
#2
|
|
|
Power Member
 
加入日期: May 2005
文章: 593
|
NVIDIA nForce 500 有支援 NCQ
http://www.nvidia.com/page/nforce5_features_amd.html http://www.nvidia.com/page/nforce5_specs_amd.html http://www.nvidia.com/page/nforce5_briefs_amd.html Six 6 SATA 3Gb/s Drives* Combine up to 6 SATA drives into one volume for bigger, faster RAID. More drives mean more configuration options such as 6 RAID 0 (striped) drives for maximum throughput, or Dual RAID 5 arrays. Take advantage of the latest SATA-2, 3Gb/s hard disk drives with full support for native and tagged command queuing and hot plug. Native command queuing provides higher disk performance in a multi-threaded environment by performing out-of-order disk accesses. *Feature not available on NVIDIA nForce 570 LT SLI/560 SLI/560/550/520/520 LE MCPs |
|
2007-12-15, 09:43 AM
#3
|
|
|
Major Member
加入日期: Jan 2007 您的住址: TAIWAN
文章: 140
|
XP有支援NCQ嗎？
是不是只有VISTA才支援NCQ？
__________________
|
|
2007-12-15, 10:28 AM
#4
|
|
|
Power Member
加入日期: May 2005
文章: 593
|
引用:
XP 有支援 要安裝 IDE_SW 這個然後控制通道就可以看見 Enable Native command queuing 不過 nForce 560 以後就要用 F6 的 載入 AHCI 控制器的方式 |
|
|
2007-12-15, 10:32 AM
#5
|
|
