小弟很久沒用燒錄機了，上星期用了之後，發現燒錄機不能用了.....
兩個月前還用的好好的，不過因為中毒的關係，在兩星期前有重灌過

燒錄機可以讀，但無法寫入，因為不死心的關係，創造了六片杯墊(寒~)
(用Nero和winxp內建的燒錄程式都無法成功)
已爬過文，有人是說沒裝晶片組^^b，裝進去後重灌Nero OEN 6.3.1.4還是無法成功

最誇張的是....拿到別人的電腦上居然ok(傻眼了....)

懇請有經驗的各位賜教，請大家幫我一把!!!

作業系統：Windows xp sp2
CPU：Intel P4 3.00GHz
記憶體：512MB
主機板：MSI 865PE Neo2-PS
燒錄器：LITE-ON LTR-52327S

------------------------錯誤訊息------------------------
USER
NONE
1A20-0218-0000-1286-0538-0681*

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=0, 2, 1, 3, size=66560 bytes, created 1999/8/24 下午 09:55:32
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 2003/12/17 上午 02:18:04
Nero版本: 6.3.1.4 (Nero Express)
燒錄器： <LITE-ON LTR-52327S> 版本: QS58 - HA 1 TA 1 - 6.3.1.4
界面卡驅動程式： <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <CD-ROM GO-C5200B >版本: GB6D - HA 1 TA 0 - 6.3.1.4
界面卡驅動程式： <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST3120026A atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3120026A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : CD-ROM GO-C5200B atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : LITE-ON LTR-52327S atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
CD-ROM GO-C5200B H: CDRom0
LITE-ON LTR-52327S I: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 192MB (197584kB)
Memory in use : 62 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

4.8.2006
光碟映像檔
下午 09:39:00 #1 Phase 90 File dlgbrnst.cpp, Line 1807
啟動防燒壞保護

下午 09:39:01 #2 Text 0 File Reader.cpp, Line 118
Reader running

下午 09:39:01 #3 Text 0 File Writer.cpp, Line 124
Writer LITE-ON LTR-52327S running

下午 09:39:01 #4 Text 0 File Burncd.cpp, Line 3188
Turn on 光碟一次燒錄(DAO), using CD-R/RW media

下午 09:39:01 #5 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 359846 ( 79:59.71)
Last address to be written: 40762 ( 9:05.37)

下午 09:39:01 #6 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE

下午 09:39:01 #7 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: LITE-ON LTR-52327S;
CDR code: 00 97 27 06; OSJ entry from: DIGITAL STORAGE TECHNOLOGY CO.,LTD
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 1B 06 (LI 97:27.06), 3: 4F 3B 48 (LO 79:59.72)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

下午 09:39:01 #8 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================

下午 09:39:01 #9 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM模式1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 40763 (40763) = #40763/9:3.38
relocatable, disc pos for caching/writing not required/not required, patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 40763 blocks [LITE-ON LTR-52327S ]
--------------------------------------------------------------

下午 09:39:01 #10 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [LITE-ON LTR-52327S ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 83789824, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
40763 | lead-out | 1 | 0x00 | 0x41

下午 09:39:01 #11 Phase 24 File dlgbrnst.cpp, Line 1807
檔案暫存作業開始

下午 09:39:01 #12 Text 0 File Burncd.cpp, Line 4195
Cache writing successful.

下午 09:39:01 #13 Phase 25 File dlgbrnst.cpp, Line 1807
檔案暫存作業完成

下午 09:39:01 #14 Phase 36 File dlgbrnst.cpp, Line 1807
以4x (600 KB/s)的速度開始燒錄

下午 09:39:01 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2334
Verifying disc position of item 0 (relocatable, no disc pos, patch infos, orig at #0): write at #0

下午 09:39:01 #16 Text 0 File Mmc.cpp, Line 15254
StartDAO : CD-Text - Off

下午 09:39:01 #17 Text 0 File Mmc.cpp, Line 19872
Set BUFE: supported -> ON , SMART-BURN : ON

下午 09:39:01 #18 Text 0 File Mmc.cpp, Line 15541
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 09 05 26

下午 09:39:26 #19 SCSI -1135 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0A880000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x01 0x60 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

下午 09:39:26 #20 CDR -1135 File Writer.cpp, Line 301
寫錯誤

下午 09:39:26 #21 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

下午 09:39:26 #22 Phase 38 File dlgbrnst.cpp, Line 1807
以4x (600 KB/s)的速度燒錄失敗


Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 2004/8/3 下午 10:59:44 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
------------------------錯誤訊息------------------------

謝謝大家幫忙^^