小弟在3個月前買了一部Liteon LDW-851S的dvd燒錄器,最近官方有新版本韌體釋出
GS0K,相關網址如下:
http://www.liteonit.com/ODD/English...re_dvd%20rw.asp
但是問題是經升級後,燒錄常常失敗,(上個版本也會GS0H)不曉得使用跟我同一機種的大大有沒有類似這種問題?小弟電腦配備入下AMD BUTTON 2500+,ShuttleX準系統一台,512
ddr ram一支 ATI9600顯示卡一張,使用軟體DVD X COPY 或 DVD SHINK3.2+NERO6.3.120; NERO 燒入錯誤log如下:
下午 10:49:51 #16 Phase 24 File dlgbrnst.cpp, Line 1855
檔案暫存作業開始

下午 10:49:51 #17 Text 0 File Burncd.cpp, Line 4183
Cache writing successful.

下午 10:49:51 #18 Phase 25 File dlgbrnst.cpp, Line 1855
檔案暫存作業完成

下午 10:49:51 #19 Phase 28 File dlgbrnst.cpp, Line 1855
速度測量開始

下午 10:49:52 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

下午 10:51:21 #21 Text 0 File WriterStatus.cpp, Line 115
<LITE-ON DVDRW LDW-851S > start writing Lead-Out at LBA 2286112 (22E220h), lenght 0 blocks

下午 10:51:21 #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

下午 10:51:21 #23 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK

下午 10:51:21 #24 Phase 29 File dlgbrnst.cpp, Line 1806
速度測量已完成：37.6x (51,964 KB/s)

下午 10:51:21 #25 Phase 36 File dlgbrnst.cpp, Line 1855
以4x (5,540 KB/s)的速度開始燒錄

下午 10:51:21 #26 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

下午 10:51:21 #27 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 14:10,273 (850273ms) -> OK

下午 10:51:21 #28 Text 0 File DVDR.cpp, Line 1942
Recording mode: Sequential Recording Mode

下午 10:51:21 #29 Text 0 File Mmc.cpp, Line 20531
Set BUFE: supported -> ON , SMART-BURN : ON

下午 10:51:21 #30 Text 0 File DVDR.cpp, Line 2083
Start write address at LBA 0
DVD high compatibility mode: Yes

下午 10:51:21 #31 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

下午 10:51:53 #32 Text 0 File Cdrdrv.cpp, Line 1294
22:51:53.093 - LITE-ON DVDRW LDW-851S\H0 T1 : Queue again later

下午 10:57:49 #33 SCSI -1135 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x091F3000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x5C 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

下午 10:57:50 #34 SCSI -1023 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x04000000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x0D 0x3F 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x2C 0x00

下午 10:57:50 #35 CDR -1135 File Writer.cpp, Line 304
寫錯誤
LITE-ON DVDRW LDW-851S\H0 T1

下午 10:57:50 #36 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

下午 10:57:50 #37 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

下午 10:57:50 #38 Text 0 File DVDR.cpp, Line 2325
EndDAO: Last written address was 868159

下午 10:57:50 #39 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK

下午 10:57:50 #40 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK

下午 10:57:50 #41 Phase 38 File dlgbrnst.cpp, Line 1855
以4x (5,540 KB/s)的速度燒錄失敗


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 2003/10/28 下午 06:02:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\nvidesm.sys': Ver=5.10.2600.0307 built by: WinDDK, size=20224 bytes, created 2002/11/13 下午 03:10:00 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
固小弟想請教各為大大
1.若小弟想刷回原來之韌體該如何操作?我沒有原始韌體
2.我的硬碟排線跟光碟機是分開的,但是是否準系統本身POWER太小對於燒錄DVD並不適合
3.若已上問題均不存在,是否跟在下的OS有關

小弟已燒壞20片DVD 5片萊德8x +R金面,10片 TRAXDATA 4X +R 原本以為是燒錄片品質問題
固小弟用三陵8X +R 試一試沒想到 燒到85%又掛了,最後小弟不得已用DVD RW多次抹寫才成功,是否跟LiteOn燒錄器品質有問題?感謝各位大大!再不行小弟就決定換一台A08試一試了