|
||
|
Major Member
 加入日期: Dec 2001
文章: 249
|
雙層NEC 2510a firmware出現
|
|||||||
2004-05-11, 11:56 PM
#1
|
|
|
Major Member
加入日期: Jun 2002
文章: 155
|
看來需要一位勇者.且手中有雙層的空片
不知道國外論壇內的人有人真的成功 用此招燒d9嗎? |
||
|
2004-05-12, 01:26 AM
#2
|
|
|
Advance Member
  加入日期: Jun 2003
文章: 407
|
改完後 可以改回來嗎?
很想刷看看..... |
|
2004-05-12, 09:02 AM
#3
|
|
|
Senior Member
加入日期: Apr 2002 您的住址: 機器堆裡
文章: 1,092
|
要改真的是需要勇氣
手邊又沒有DL的空片... 只能看著螢幕顯示乾爽.... 還是看一下國外的反應吧 |
|
2004-05-12, 09:33 AM
#4
|
|
|
New Member
加入日期: May 2004
文章: 5
|
|
|
2004-05-12, 03:20 PM
#5
|
|
|
Senior Member
加入日期: Apr 2002 您的住址: 機器堆裡
文章: 1,092
|
節錄 CD Freaks.com的一段話
This is intresting information as this means that it will very likely be possible to overclock a ND-2500 to a ND-2510. However there is a big but. It is unlikely that all ND-2500 drives will be able to correctly write to double layer media. Writing to this media requires very good quality parts, certainly of the Optical Pickup Unit (OPU) and since NEC has never claimed that the ND-2500 could write to double layer discs it could be possible that only a small amount of ND-2500 drives will work with double layer discs. But only testing when there is double layer available on the market will tell how many ND-2500's will be able to write double layer discs with the ND-2510 firmware. 能改的算運氣好,不能改的算正常 ? 不過現在看到的測試結果都是在第二層的時候會出現高PI/Po 難道真的是沒有用DL的機器去做測試嗎? |
|
2004-05-12, 05:18 PM
#6
|
|
|
Golden Member
加入日期: Apr 2002
文章: 3,375
|
之前各大網站測試的機器就是廠商提供的正規(DL)機，不是經由韌體升級來的。
但結果差不多，到第二層就不行了。 更早之前甚至還不敢秀出燒錄機型號，因為燒出來的成果實在是差到不行，很多機器根本是讀不出來。是後來有人先跑，其他網站忍不住才貼出初步測試的。 現在各家都在調韌體中，還看不出那一家比較值得買。 |
|
2004-05-12, 05:35 PM
#7
|
|
|
Major Member
加入日期: Dec 2001
文章: 249
|
應該是碟片的品質問題吧....到現在還沒看到公開發售的dl碟呀...
刷了2510a可以再刷回去2500.... |
|
2004-05-12, 09:52 PM
#8
|
|
