|
||
|
Elite Member
  
加入日期: Mar 2001 您的住址: 桃園縣龜山鄉
文章: 12,765
|
死Maxtor終於更新Powermax,but....
剛剛逛到Maxtor網站,不小心看到PowerMax終於更新為4.06版
http://www.maxtor.com/en/support/downloads/powermax.htm 之前的版本不支援許多新南橋,所以我就趕緊download下來試試,結果在我的nForce2 MCP-T下還是不能執行,會跳出程式,於是又到網站上看一下,結果發現這一段 Note: PowerMax v4.06 will not detect Ultra ATA hard disks connected to motherboards with embedded NVIDIA chipsets (SATA drives are supported). A new version to address this issue is currently in development and is slated for release soon. Please check the PowerMax download page periodically for updates. All versions of PowerMax prior to 4.06 are no longer supported, it is recommended that you update to version 4.06 before testing your hard disk. X勒,大半年不更新,更新後又不支援nVidia Chipset,討人厭 
__________________
請不要再用打的方式教育小狗,有愛心的人請買以下的書來讀好嗎??謝謝您 別只給我一根骨頭 狗狗的異想世界 貓狗大戰：寵物行為四週集訓 愛咪咪的異想世界 終於還完12x萬的負債,以後不敗家了 阿斗的歷史名言:此間樂,不思蜀 
|
|||||||
2003-06-06, 12:02 AM
#1
|
|
|
Senior Member
 
加入日期: Aug 2001 您的住址: 台中
文章: 1,475
|
回覆: 死Maxtor終於更新Powermax,but....
引用:
前幾天重組硬碟到一半就停住了， 想說用Windows的磁碟檢查看看是怎樣， 結果好像掃到壞軌... 正想拿powermax來測看看，結果每次都會跳出程式... 原來是跟nForce2相衝=.= Maxtor到底在搞什麼... 
__________________
我的主機 --------------------------------------------- Intel E8400｜ASUS P5QL-E｜MSI 9800GT｜ZIPPY HP2-6500P --------------------------------------------- |
|||
|
2003-12-29, 01:39 AM
#2
|
|
