引用:
Originally posted by idiot
If you improve(change) your dye formulation all the time, then what formulation do you want the firmware writers to target?
One should only use one die formulation per ATIP code combination. In many cases the speed rating printed on the disk changes, without a dye formulation change. Although Ricoh did change their Phthalocyanine formulation 4 times over the lifetime, you didn't saw a change in Ritek's code because Ritek marks all the dye formulas supplied by Ricoh as r染. Such is not the case for their own dye like G染.
read
http://www.mitsuicdrstore.com/quality_nh.html
"Since we have not changed our dye formulation in over 5 years, drive manufacturers are able to easily configure their units for our dye. That's why Mitsui CD-R is compatible with every writer & reader on the market--a CD-R that we manufactured 5 years ago will perform the same as the ones made today. "
|
自打嘴巴
再舉一個實例:
以650mb 3菱湛藍片為例:
我手上的舊版ㄉ三菱湛藍片跟新版可24x以上ㄉ湛藍片版面一樣
染料也屬同一種都是AZO
舊版的只能12~16x
新版的就可24x
g dyeㄉ部份
偶手上ㄉ空片就可以證明一切
要證明ㄉ話到店家買來比對還有真實ㄉ去燒錄就可知道
不用跟我再爭辯
target what dye?
-upgrade ur cdrw firmware
以普傑ㄉ軔體為例
除ㄌ新軔體會debug cdrw的燒錄過程之外.也會對更多空片dye來做速度定義.更會把原本有定義的dye最佳化,使讀片率更高,不再有甜甜圈
所以空片染料跟軔體是一直持續再精進的(improve)
你所說的r染部份,就是以之前ㄉ24x dye再做精進之後推出32x dye
那我就不清楚你再說啥ㄌ,你覺得有可能為ㄌ32x而ricoh又另請研發部門研發全新的dyeㄇ?
ㄏㄏ
換染料是真ㄉ,但不是換全新ㄉ染料來應付新倍數
是improve