既然某高手兄老是說會當機.........且確信自己已無犯錯...
好吧....幫你查
浩鑫的FAQ裡寫的很清楚.轉貼原文如下:

問題:After installing the driver for ATI series AGP 4x VGA card on AV40/R mainboard, why do I get a blank screen? Then no matter what I do, system powers up but still blank screen.　

答案:Please follow the following steps to avoid the problems :
1. Disable AGP 4x mode or change to 2x mode in Bios

2. Install O.S.　

3. Install VIA 4-in-1 drivers (4.29V or later)

4. Install ATI VGA driver

5. Enter to O.S.

6. Restart the system and go back to Bios Setup to enable AGP 4x mode

嗯..得先進BIOS關掉AGP 4X的選項或調至2X.再安裝作業軟體.然後灌4 IN 1 4.29以後版本然後再打開AGP 4X......

這是ATI或浩鑫的問題嗎?我看主機板問題大點........
而且有照作嗎?
這很值得某些一遇到問題就狂罵的玩家深思....

抱怨或解決??