引用:
Originally posted by krups
1. 基本上是不是format過才做成RAID 0的。一選上做RAID時硬碟的東西不是都會重新安排了嗎????所以還是要重新fdisk和format。
2. 你的RAID 卡是那一塊呀~~ 你的兩顆硬碟型號有一樣嗎?
怪怪的...
實戰：我是用兩顆IBM 30G 做raid 0，而buffer 是開到最大 (1MB 吧!!)，沒有什麼問題....(後段加速很快的喔~~)
http://forum.1bits.com/showthread.p...10&pagenumber=4
|
Hello everyone,
I really need help on installing WindowsXP from CD-ROM onto a striping array (RAID 0).
So far I can’t make those two HD’s boot from RAID card (even when not set in striping). EIO AP-1680 (PCI ATA133 IDE RAID Controller) is the name of the RAID card I am using now and their web site EIO - Extreme IO Experience
I only see 4 options from RAID card utility when I boot-up
1. delete RAID set
2. create RAID set
3. create spare set
4. resolve conflicts
and I use two 40GB HD to create a striping disk using option 2 therefore I got a 80GB drive after.
The question is how can I make it to bootable?? Because I tried every possible boot-up device in BIOS without success ;-(
Surely it’s a Mass-Storage device control card therefore I should choose SCSI device for boot-up device. But it still won’t boot-up ;-(
What should I do to make it bootable also to clean install WindowsXP??
Please help me
p.s. I sort of heard that I can't make striping disk's C drive to boot partition ---> is that ture??