Sambar Server
www.sambar.com

Install and enable proxy.

TCP/IP Configuration

To use the Sambar Server proxy functionality, all hosts must be configured with TCP/IP.

The Sambar HTTP Server and HTTP Proxy share the same port, so if the HTTP server is changed to run on a port other than 80, the HTTP Proxy will also run on this new port.

Client/Browser Configuration

Important: <your machine> refers to the machine on which the Sambar Server is installed.

Netscape Version 4[/u]

Open the Netscape Communicator Web Browser.

Select the Edit menu.

Select the Preferences menu item.

Click on the plus (+) in front of the Advancced tree control.

Click the Proxies item.

Select Manual Proxy Configuration radio button and click the view button.

Type <your machine> in the HTTP Proxy: field and 80 in the port field.

Type <your machine> in the Security Proxy: field and 80 in the port field.

Type <your machine> in the FTP Proxy: field and 80 in the port field.

Type <your machine:80> in the No Proxies for: field.

Click the OK button to close the dialog box

[b]Microsoft Internet Explorer

Open the Microsoft Internet Explorer Web Browser.

Open the View menu.

Select the Options menu item.

Click on the Connection tab.

Select Connect through a proxy server.

Click on the Settings button.

Type the following settings in the Servers section:

HTTP: <your machine> Port: 80

Leave all other field blank.

Click the OK button to close the Proxy Settings dialog box.

Click the OK button to close the Options dialog box.

Lastly, if your clients are using the Sambar Proxy Server as well as the Sambar HTTP Server, they must configure the No Proxy for: field of their browser to the Sambar HTTP Server, port 80. For Internet Explorer, the "bypass proxy servre for local internet addresses" should be turned on.