不好意思來回挖一個老帖，因為我的9128刷完之後，也是變成9123
後來爬文爬到這樣的訊息

https://www.win-raid.com/t200f13-Di...modules-12.html

The ID is selected depending on the controller's mode: 91A3 in IDE, 9123 in AHCI, 9128 in RAID. If you have a controller only capable of IDE or AHCI, it will have the right ID. If you have a controller capable of RAID, like 9128, it will use an OROM with 9123 ID and switch it on the fly to match the mode. Use 9123 ROM/BIOS if you have 9128 controller - this is Marvell's way of doing things. As for the IDE label, haven't seen anyone else mentioning it, don't know if it is something you can fix. Use proper ID as explained above, check in mainboard BIOS, check in Marvell BIOS.

簡單上來說，晶片在IDE模式會顯示91A3，AHCI模式顯示9123，RAID模式顯示9128
原帖是說更新後的ID變化不影響使用，不過我刷完之後會卡在marvell的BIOS自檢測