感謝回覆
已再下載
8.07.06_MegaCLI
可以run FALSH程序不過無法完成(在DOS和Windows 7 Command Prompt 都一樣)
DOS下做FLASH
MEGASAS.LOG 如下
Adapter 0: LSI MegaRAID SAS 9260-8i
Vendor ID: 0x1000, Device ID: 0x0079

Package version on the controller: 12.6.0-0017
Package version of the image file: 12.12.0-0139

5 % Download Completed
10 % Download Completed
15 % Download Completed
20 % Download Completed
25 % Download Completed
30 % Download Completed
35 % Download Completed
40 % Download Completed
45 % Download Completed
50 % Download Completed
55 % Download Completed
60 % Download Completed
65 % Download Completed
70 % Download Completed
75 % Download Completed
80 % Download Completed
85 % Download Completed
90 % Download Completed
95 % Download Completed
Download Completed.
Flashing image to adapter...
Firmware Failed to FLASH flash. Stop!!!

FW error description:
The requested command cannot be completed as the image is corrupted.

Exit Code: 0x13

試過MSM也無法FLASH
請問卡上有保護嗎? 或指令可以下強制寫入參數

謝謝!!