raidcply /t >test.txt
1. Intel(R) SATA RAID Controller Presence Tests
1.1 Intel(R) Chipset Detected....................................PASS
1.2 RAID Controller DevID at D31:F2..............................PASS
1.3 RAID Controller Name.......................ICH8R or later(no LPC)
1.4 RAID SubClass Code (0x04) at D31:F2..........................PASS
1.5 Chipset Revision............................................Rev 0
1.6 AIE Bit is CLEAR(0) at Dev31 Funct2..........................PASS
1.7 Raid Platform ID..............................................N/A

2. PnP Installation Tests
2.1 $PnP Anchor String Present in 0xF000 Segment.................PASS
2.2 PnP Header Checksum Valid....................................PASS

3. BBS Enabled BIOS Tests
3.1 PCI BIOS Present (INT 1A, Func 0xB101).......................PASS
3.2 PCI BIOS Version..............................................N/A
3.3 PCI BIOS Version Supports OROM PCI Version...................PASS

4. AHCI Register Settings Tests
4.1 HBA Port Multiplier Support Status.......................DISABLED
4.3 HBA Supports Command List Override...........................PASS
4.4 HBA Supports Interlock Switch............................DISABLED
4.5 HBA Capabilities Register Locked.............................PASS
4.6 AHCI Enable Bit Status....................................ENABLED

4.7 Port Implemented Bit Set for Port 0.......................ENABLED
4.8 PI Bit Matches PE Bit for Port 0.............................PASS
4.9 Aggressive Link Power Management on Port 0...............DISABLED
4.10 Hot Plug Support on Port 0..............................DISABLED
4.11 Interlock Switch Attached to Port 0..........................N/A
4.12 ALPE and HPCP Cannot Both be Set on Port 0..................PASS
4.13 ISP Requires HPCP on Port 0.................................PASS
4.14 Port 0 Command Register Locked..............................PASS
4.15 External Port Bit Set for Port 0.........................ENABLED

4.7 Port Implemented Bit Set for Port 1.......................ENABLED
4.8 PI Bit Matches PE Bit for Port 1.............................PASS
4.9 Aggressive Link Power Management on Port 1...............DISABLED
4.10 Hot Plug Support on Port 1..............................DISABLED
4.11 Interlock Switch Attached to Port 1..........................N/A
4.12 ALPE and HPCP Cannot Both be Set on Port 1..................PASS
4.13 ISP Requires HPCP on Port 1.................................PASS
4.14 Port 1 Command Register Locked..............................PASS
4.15 External Port Bit Set for Port 1.........................ENABLED

4.7 Port Implemented Bit Set for Port 2.......................ENABLED
4.8 PI Bit Matches PE Bit for Port 2.............................PASS
4.9 Aggressive Link Power Management on Port 2...............DISABLED
4.10 Hot Plug Support on Port 2..............................DISABLED
4.11 Interlock Switch Attached to Port 2..........................N/A
4.12 ALPE and HPCP Cannot Both be Set on Port 2..................PASS
4.13 ISP Requires HPCP on Port 2.................................PASS
4.14 Port 2 Command Register Locked..............................PASS
4.15 External Port Bit Set for Port 2.........................ENABLED

4.7 Port Implemented Bit Set for Port 3.......................ENABLED
4.8 PI Bit Matches PE Bit for Port 3.............................PASS
4.9 Aggressive Link Power Management on Port 3...............DISABLED
4.10 Hot Plug Support on Port 3..............................DISABLED
4.11 Interlock Switch Attached to Port 3..........................N/A
4.12 ALPE and HPCP Cannot Both be Set on Port 3..................PASS
4.13 ISP Requires HPCP on Port 3.................................PASS
4.14 Port 3 Command Register Locked..............................PASS
4.15 External Port Bit Set for Port 3.........................ENABLED

4.7 Port Implemented Bit Set for Port 4.......................ENABLED
4.8 PI Bit Matches PE Bit for Port 4.............................PASS
4.9 Aggressive Link Power Management on Port 4...............DISABLED
4.10 Hot Plug Support on Port 4..............................DISABLED
4.11 Interlock Switch Attached to Port 4..........................N/A
4.12 ALPE and HPCP Cannot Both be Set on Port 4..................PASS
4.13 ISP Requires HPCP on Port 4.................................PASS
4.14 Port 4 Command Register Locked..............................PASS
4.15 External Port Bit Set for Port 4.........................ENABLED

4.7 Port Implemented Bit Set for Port 5.......................ENABLED
4.8 PI Bit Matches PE Bit for Port 5.............................PASS
4.9 Aggressive Link Power Management on Port 5...............DISABLED
4.10 Hot Plug Support on Port 5..............................DISABLED
4.11 Interlock Switch Attached to Port 5..........................N/A
4.12 ALPE and HPCP Cannot Both be Set on Port 5..................PASS
4.13 ISP Requires HPCP on Port 5.................................PASS
4.14 Port 5 Command Register Locked..............................PASS
4.15 External Port Bit Set for Port 5.........................ENABLED

4.16 CAP.SIS and PxCMD.ISP Agreement.............................PASS
4.17 Software Feature Mask Bit...............................DISABLED

5. Chipset RAID Controller Settings Tests
5.1 RAID I/O Space Enabled.......................................PASS
5.2 RAID Memory Space Enabled....................................PASS
5.3 RAID Programming Interface Set to 0..........................PASS
5.4 RAID Programming Interface Locked............................PASS
5.5 Primary Command BAR Programmed...............................PASS
5.6 Primary Control BAR Programmed...............................PASS
5.7 Secondary Command BAR Programmed.............................PASS
5.8 Seconday Control BAR Programmed..............................PASS
5.9 Legacy Bus Master BAR Programmed.............................PASS
5.10 AHCI BAR Programmed.........................................PASS
5.11 MAP Bits Set to Non-Combined (00b)..........................PASS
5.12 SATA Mode Select Set to RAID (10b)..........................PASS

5.13 Port 0 Enable Bit Set....................................ENABLED
5.14 SATA Device Present on Port 0..............................ATAPI

5.13 Port 1 Enable Bit Set....................................ENABLED
5.14 SATA Device Present on Port 1...............................NONE

5.13 Port 2 Enable Bit Set....................................ENABLED
5.14 SATA Device Present on Port 2...............................NONE

5.13 Port 3 Enable Bit Set....................................ENABLED
5.14 SATA Device Present on Port 3...............................NONE

5.13 Port 4 Enable Bit Set....................................ENABLED
5.14 SATA Device Present on Port 4...............................NONE

5.13 Port 5 Enable Bit Set....................................ENABLED
5.14 SATA Device Present on Port 5...............................NONE

5.15 At least 2 SATA HDDs found..................................FAIL
5.17 Primary IO Decode Enabled....................................N/A
5.18 Secondary IO Decode Enabled..................................N/A
5.19 Primary Timing Register Programmed...........................N/A
5.20 Secondary Timing Register Programmed.........................N/A

6. Intel(R) RAID Option ROM Tests
6.1 Option ROM Found in BIOS Compatibility Segments..............PASS
6.2 Option ROM Build Matches Chipset.............................PASS
6.3 Option ROM Checksum Valid....................................PASS
6.4 Main Memory Size < 639kB.....................................PASS
6.5 Option ROM Caching........................................ENABLED

7. System BIOS Tests
7.1 BIOS Does Not Export HDD's on RAID Controller.................N/A
7.2 BIOS Updating INT 15h E820 Memory Map........................PASS
7.3 BIOS Reporting Correct Base Memory Size in 40:13.............PASS

8. Interrupt Settings Tests
8.1 RAID Controller IRQ............................................15
8.2 Clear Spurious Interrupts on RAID Controller..................N/A
8.3 Performance Enhancement Semaphore at 40:8E...............DISABLED

9. NVM Register Settings Tests
9.1 NVMHCI capability in CAP2 register.......................DISABLED
9.2 NVMHCI Version................................................N/A
9.3 NVMHCI Ports Implemented......................................N/A
9.4 NVMHCI Port Signature.........................................N/A
9.5 NVM Present on Port...........................................N/A

Total Test(s): 54; PASS: 53 FAIL: 1