OK!
升級成功!!!
等測試完交報告(可能啦)

關鍵

JKDL_SP {韌體名}[空格]{/副檔名}[空格]{硬碟所在通道代碼}

所以執行指令依序為
JKDL_SP JK0NB3EA /BDX /D00

因為我是用轉卡接在主排線的第一裝置所以代碼是 /D00



****************************************************************************
JUPITER-K ATA/SATA MICROCODE UPDATE PROGRAM REV 1.30
(C) 2009, Hitachi Global Storage Technologies. All rights reserved.
****************************************************************************
Usage: JKDL_SP <auto-detect drives>
: JKDL_SP zzz [option] <specify drive>

eg. JKDLBRD 40A /BDX /D00
eg. JKDLBRD JK*O*40A /BCX /S1
[option]
/BDX - Download *.BDX
/BCX - Download *.BCX <Model Change>
/BDY - Download *.BDY
/BCY - Download *.BCY <Model Change>
/D00 - Primary Master
/D01 - Primary Slave
/D10 - Secondary Master
/D11 - Secondary Slave
/S1 - Select SATA Drive-1 ( IOPort Address : FE00 )
/S2 - Select SATA Drive-2 ( IOPort Address : FE20 )
/IO1 xxxx - Set Port Address <Hex> (DTR)
/IO2 xxxx - Set Port Address <Hex> (ASR)
/DRV x - Specify Master or Slave(x=0:Master, x=1:Slave)

C:\>